• Journal of Oral Medicine and Pain
• /
• v.35 no.1
• /
• pp.75-81
• /
• 2010

By repeating nocturnal bruxism occlusal appliance's wearing condition that is used to cure temporomandibular disorders into the vitro experiment, research aims to find out how moisture infiltrated and drying cycle process affects on the surface microhardness of the resin for occlusal appliance and flexural strength. By utilizing resin for occlusal appliance which is the main component of poly methyl methacrylate, bar shaped sample was produced. For the resin sample utilized as the controlled group 1, the sample was infiltrated in the moisture for 7 days in the temperature of 37C. Then, the resin sample of the controlled group 2 was maintained in a dry condition for 7 days in the normal temperature. After that, each sample's surface microhardness and flexural strength were measured. For the resin sample that is utilized as the experimental sample, the sample was infiltrated in the moisture for 7 days in the temperature of 37C. Then, it was inundated for 8 hours a day and dried in the normal temperature for 16 hours with the continuous process of moisture infiltration and dry cycle process for 30 days. During this cycle process, sample's surface and flexural strength were measured in the 1st day, 7th day, and 30th day. Then, it was statistically analyzed to find out the difference of controlled and experiment group's surface microhardness and flexural strength. Results are 1. For the experimental and controlled group's surface microhardness of the resin for the occlusal appliance, it did not show any significant differences after moisture infiltration and dry cycle process repetition. 2. In case of the flexural strength for resin for the occlusal appliance, experimental group with moisture infiltration and dry cycle for 30 day process had greater effect than the experimental group at the 1st day and controlled group These results can be considered to be utilized from the patients of the temporomandibular disorders towards occlusal appliance used and maintained method.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.3
• /
• pp.219-229
• /
• 2002

Background : Sepsis-induced acute lung injury (ALI) is caused by many cellular and humoral mediators induced by an endotoxin. Histamine, which is widely distributed in the lungs and has been considered as an important mediator of sepsis. It increases P-selectin expression on the endothelial cell surfaces and induces IL-8 secretion. Therefore, an endotoxin-induced histamine may be related to neutrophil-mediated ALI by inducing the migration and activation of neutrophils in the lung tissue. However, the role of endogenous histamine in endotoxin ALI has not been clarified. The purpose of this study was to investigate how endotoxin-induced ALI is influenced by endogenous histamine and to identify the possible mechanism of action. Materials and Methods : The study consisted of 4 groups using Sprague-Dawley rats : 1) control group, where the rats were infused intratracheally by normal saline, 2) an endotoxin group, where lipopolysaccharide (LPS) was administered intratracheally 3) the $H_2$ receptor antagonist-treated group ($H_2$ group) and 4) the $H_1$ receptor antagonist-treated group ($H_1$ group), where $H_2$-receptor blocker (ranitidine) and $H_1$-receptor blocker(pyrilamine) were co-treated intravenously with the intratracheal administration of an endotoxin. The lung leak index using $I^{125}$-BSA, the total protein and LDH concentration in the lung lavage fluid, myeloperoxidase(MPO) activity in the lung tissue, the pathologic score and the total number of neutrophils, TNF-$\alpha$, IL-$1{\beta}$ and IL-10 in lung lavage (BAL) fluid were measured in each group as the indices of lung injury. Results : Compared to the control group, the endotoxin group exhibited significant increases in all lung injury indices. Significant reductions in the endotoxin-mediated increases in lung leak index (p<0.05) were observed in both the $H_1$ and $H_2$ groups. In addition the total protein (p<0.05) and LDH concentration (p<0.05) in the BAL fluid were also lower in the $H_2$ group compared to the endotoxin group. However, there was no change in the MPO activity in the lung tissue, the pathologic score and the total number of neutrophils in the BAL fluid in both the $H_2$ and $H_1$ groups compared to the endotoxin group. The increases in TNF-$\alpha$ IL-$1{\beta}$ and IL-10 concentrations in the BAL fluid observed in the endotoxin group were not reduced in the $H_2$ and $H_1$ groups. Conclusion : Antihistamine attenuated the enhanced alveolar-capillary permeability induced by the endotoxin via the $H_2$ receptor. However the attenuating mechanism may not be related to the pathogenesis of neutrophil dependent lung injury.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.60-68
• /
• 1983

Ever since the day of pre-modernized society where the farming skill had been in the stagnant condition, the common farmwoodlands have been utilized in common (collectivelly) by villagers in order to harvest farmwoodlands and fuelwoods. Later, during the process of modernization, most of the common farmwoodlands were transferred into national or public forests by the administrative enforcement, but there were still various types of village (common) forests such as the common forests owned by joint owners, village block associations, village forest productive societies, Village Forestry Association(V.F.A.), and the national or public forests leased to V.F.A. As Village Forestry Association is organized with a few villages, each of common forests ow nod to the villages is obliged to be diversely controlled by other managers than the chief of V.F.A. Therefore, it is to be desired that the control of common forests should be under Gun Forestry Association Union. While the rate of the use of common forests for fuelwoods and cemetery has been considerably high, villagers wish to promote the timber forest establishment through the collective management by their improved farming skills and economical situations. In these present circumstances the village forest productive societies should be guided to work in closer cooperation with Gun Forestry Association Union. Since the management of common forests is still extensive, it still remains in the semi-management condition under which we can not find any management plan or measure to control forest damage. Especially the small area common forests should have appropriate size for the joint management. This will promote the forest productivity through the lease for reforestation of disposable national forests or public county forests and the contracts for profit sharing. Today owing to increasing forest value, frequent dispute has occurred on the common right telated to the village forests and rationalization of forest management has been disregarded. If a necessary measure were taken to control the dispute such as transferring the registeration right of ownership to the village forest productive society, the confidence of local inhabitants can be regained and the productivity of forests can be naturally increased.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.221-239
• /
• 2010

Bone loss may occur depending on the loading conditions. careful treatment planning and prosthetic procedures are very important factors for the proper distribution of stress. Evaluate the stress distributions according to numbers and location of implants in three-unit fixed partial dentures. A mandible missing the right second premolar, first molar and second molar was modeled. Using the CT data. we modeled a mandible with a width of 15mm, a height of 20mm and a length of 30mm, 2mm-thickness cortical bone covering cancellous bone mallow. An internal type implant and A solid type abutment was used. A model with 3 implants placed in a straight line, offset 1.5 mm buccally, offset 1.5 mm lingually and another model with 3 implants offset in the opposite way were prepared. And models with 2 implants were both end support models, a mesial cantilever model and a distal cantilever model. Three types of loading was applied; a case where 155 N was applied solely on the second premolar, a case where 206 N was applied solely on the second molar and a case where 155 N was applied on the first premolar and 206 N was applied on the first and second molar. For all the cases, inclined loads of 30 degrees were applied on the buccal cusps and vertical loads were applied on the central fossas of the teeth. Finite element analysis was carried out for each case to find out the stress distribution on bones and implants. This study has shown that prostheses with more implants caused lower stress on bones and implants, no matter what kind of load was applied. Furthermore, it was found out that inclined loads applied on implants had worse effects than vertical loads. Therefore, it is believed that these results should be considered when placing implants in the future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.175-180
• /
• 2008

Traumatic injuries to the primary dentition are commonly encountered problems in dental practice. It is found that 30% of the children had injuries to the primary dentition and 22% to the permanent dentition. The greatest incidence of trauma to the primary dentition occurs at the ages of 2 and 3 as children start to learn motor coordination. Because teeth and alveolar bone are traumatized simultaneously, alveolar bone fractures are likely to occur when multiple teeth are involved in injuries. Dental splints are indicated for the management of maxillofacial fractures. They enable anatomic reduction of fractured segments and help immobilization and maintenance of the fragments after reduction. They also act as a stabilizer during rehabilitation. Various types of dental splints are available. In this case, routine resin-wire splint technique could not be applied because of the child's uncooperative behavior. Oral sedation was not indicated because N.P.O. had not been preceded. Therefore, we decided to use open-cap acrylic splint instead. Stabilization using open cap acrylic splint requires minimum chair time with reduced discomfort to both patient and dentist. It is an effective means of splint for uncooperative children and especially useful when other means of fixation have been failed. Because trauma on the primary dentition can affect the underlying permanent tooth germ, it is important to monitor eruption process of the permanent dentition.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.272-285
• /
• 1987

In order to obtain the data for the effective separation and purification of lysozyme from egg white, optimal conditions for the homogenization of egg white and lysozyme activities of some fresh hen eggs were examined. The recovery and purity of lysozyme isolated by the direct crystallization method, the adsorption with Bentonite and the batch method with Duolite were also investigated. The results obtained were summarized as follows; 1. On the homogenization of egg white, optimal stirring time and stirring rate for the measurement of the lysozyme activities were found to be 10 min. and 2,000 rpm respectively. 2. On the activities of lysozyme in the fresh hen eggs, the activities of W. Leghorn was greater than that of R. Island or Ogol fowl, and the activities of the thick white was a little greater than that of the thin white. 3. The residual lysozyme activities of the hen eggs stored at $4^{\circ}C$ was greater than that of the ones stored at $25^{\circ}C$ or $-20^{\circ}C$ over the storage periods. 4. Hen egg lysozyme recrystallized three times by the method of direct crystallization showed the recovery of 64.3% and the increase of 29 fold in specific activities. 5. By the adsorption method with bentonite, lysozyme in the egg white was adsorbed to 95.7%, and the elution rate of the ones adsorbed was 89.1%, and the increase in specific activities was 13 fold. 6. In the experiment exploying duolite as an adsorbent, Jysozyme in the egg white was obtained with the bound rate of 97%, the recovery rate of 84.8%, and was purified by 30fold.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Journal of the Korean Society of Food Culture
• /
• v.13 no.1
• /
• pp.19-26
• /
• 1998

This study was carreid out to investigate present comsuming behavior and consumer preference of SEAFOODS as a stuff in KIMCHI making, adopting a questionaire survey for 500 housewives living in Korea except Chejudo Province. Frequency distribution and percentage of preferences were measured. Out of total housewives responded, 65.5% consider, THEY SHOULD EAT KIMCHI DAILY. Which conforms, kimchi is still an important side dish at most of the households On the other hand, some others consider EATING KIMCHI EVERY DAY is not neccesary(6.0%) or dislike it(0.5%). This result might suggest that kimchi may or may not be an essential sidedish for every households in the future. 96.3% of Housewives used fermented salited fish and 45% used seafoods as a staffing in making kimchi. Major reasons for adding seafoods in kimchi were: it improves teste and flavor(79.5%) and nutritional value(54.2%). Reasons for rejecting seafoods as a stuffing in making kimchi were: it worsens taste and flavor(13.5%), hygenic treatments of seafoods are below the necessary level(13.5%) and shelf life become shorter(12.8%), respectively. Among the fermented salted sauces, 84.9% and 69.1% of house wives responded as anchovy and shrimp sause were most favorite(base) material in Kimchi making, respectively. Out of total seafoods utilized in making kimchi,76.4%, 54.7% and 31.4% of housewives responded as oyster, small shrimp and sea-staghorn as the favorite seafoods in Kimchi making(raw material). Majority of housewives responded to develop it's taste and flavor to meet that of international one(86.5%) and that hygienic level(treatments) should be upgraded(50.9%).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.39-55
• /
• 1992

In this research, a Three Level Decomposition technique has been developed for configuration design optimization of truss structures. In the first level, as design variables, behavior variables are used and the strain energy has been treated as the cost function to be maximized so that the truss structure can absorb maximum energy. For design constraint of the optimal design problem, allowable stress, buckling stress, and displacement under multi-loading conditions are considered. In the second level, design problem is formulated using the cross-sectional area as the design variable and the weight of the truss structure as the cost function. As for the design constraint, the equilibrium equation with the optimal displacement obtained in the first level is used. In the third level, the nodal point coordinates of the truss structure are used as coordinating variable and the weight has been taken as the cost function. An advantage of the Three Level Decomposition technique is that the first and second level design problems are simple because they are linear programming problems. Moreover, the method is efficient because it is not necessary to carry out time consuming structural analysis and techniques for sensitivity analysis during the design optimization process. By treating the nodal point coordinates as design variables, the third level becomes unconstrained optimal design problems which is easier to solve. Moreover, by using different convergence criteria at each level of design problem, improved convergence can be obtained. The proposed technique has been tested using four different truss structures to yield almost identical optimum designs in the literature with efficient convergence rate regardless of constraint types and configuration of truss structures.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.401-414
• /
• 2006

Twenty eight Holstein steers 12 months old and weighing about 300kg were andomly allotted into one of four groups being fed ammoniated rice straw(ARS) and substituted 30%, 40% and 50% crushed bamboo chip for ARS to determine the effects of different levels of bamboo chip on performance, digestibility and carcass characteristics. Daily weight gain was reduced as the substitution levels of bamboo chip for ARS as a roughage source increased but there were no differences in daily weight gain between steers fed ARS alone and 30% bamboo chip for ARS. Concentrates intakes were not different between treatments by the substitution levels of bamboo chip for the whole fattening period. Roughage intake tended to increase as the substitution levels of bamboo chip increased. Total feed intake was not affected by the substitution levels of bamboo chip. However, feed efficiency got worse with increasing levels of bamboo chip. Animals fed the roughage substituting 30% bamboo chip for ARS were higher in profit by 13% than animals fed ARS alone as a roughage source. Digestibilities of Dry matter(DDM) and crude fiber(DCF) were highest in animals fed ARS alone as a roughage source. DDM's were lower in higher substitution levels of crushed bamboo chip but there were no differences in DCF among animals fed different levels of bamboo chip as a roughage source. Crude protein digestibility was not affected by ammoniated rice straw or by the different levels of bamboo chip. Dressing percentage and backfat thickness were not affected by ammoniated rice straw or by the levels of bamboo chip but ribeye area was narrowed as the levels of bamboo chip increased. Beef color, fat color, texture, maturity and marbling score were not affected by feeding of ammoniated rice straw or by the levels of bamboo chip. According to these results, it may be concluded that profit can increase when Holstein bulls are castrated and roughage containing ammoniated rice straw plus 30% bamboo chip is offered.