• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.16001-16125
• /
• 2004

물리검층은 주로 석유탐사 분야에서 개발·이용되어왔으나 소구경 시추공을 이용하는 지반조사. 자원평가, 지하수조사 또는 환경오염조사 등에서 물리검층의 수요가 증가하고 있다. 국내에서 수행된 물리검층은 우라늄 탐사 목적으로 1980년 전후로 많이 수행되었으며 1990년 중반에는 지하수 조사에 일부 활용되어 왔다. 현재 물리검층의 활용도가 증가하고 있는 분야는 지반조사 분야로 원위치 물성측정, 시추공과 교차하는 암반의 균열파악 등 터널, 교량과 같은 각종 토목분야의 지반조사에 많이 활용되고 있다. 이외에도 지하수 유동특성 규명이나 환경오염조사, 자원평가(지열, 온천, 석·골재, 금속광상 등)에도 활용되고 있다. (중략)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.258-262
• /
• 2003

연안지역에서 해수침투대의 평가를 위하여 다양한 물리검층을 수행하였다. 특히, 해수침투대의 정량적인 평가에 활용될 수 있는 지층의 공극측정은 매우 어려운 문제중의 하나이다. 연안지역의 경우, 미고결지층에 대한 불교란 시료 채취가 어렵고 대부분의 관측정은 시추공 붕락방지를 위하여 내경 50mm 의 PVC 케이싱을 설치하는 경우가 많기 때문에 공극의 측정은 현실적으로 많은 어려움이 따른다. 본 연구에서는 전남 영광지역에서 각종 조사목적으로 굴착한 시추공에서 다양한 물리검층을 수행하여 공내수의 높은 전기전도도가 기원하는 지층을 확인하고자 하였다. 전자유도검층과 공극검층을 수행한 시추공(YK-4호공)에 대한 해석결과, 공내수의 높은 전기전도도는 물리검층법으로 추정한 사질층 공극수와 비슷한 범위를 보였다. 물리검층법으로 추정한 공극이나 높은 염수를 보이는 구간에 대한 해석결과는 보완해야할 많은 부분이 있지만 제한된 현장 상황에서 조사결과의 불화실성을 줄이는데 많은 기여를 할 것으로 기대된다.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.227-234
• /
• 2012

In this study, we make simulation of density log using a Monte Carlo N-Particle (MCNP) algorithm to make an analysis on density logging under different borehole environments, since density logging is affected by various borehole conditions like borehole size, density of borehole fluid, thickness and type of casing, and so on. MCNP algorithm has been widely used for simulation of problems of nuclear particle transportation. In the simulation, we consider the specific configuration of a tool (Robertson Geologging Co. Ltd) that Korea institute of geoscience and mineral resources (KIGAM) has used. In order to measure accurate bulk density of a formation, it is essential to make a calibration and correction chart for the tool under considerations. Through numerical simulation, this study makes calibration plot of the density tool in material with several known bulk densities and with boreholes of several different diameters. In order to make correction charts for the density logging, we simulate and analyze measurements of density logging under different borehole conditions by considering borehole size, density of borehole fluid, and presence of casing.

• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.20-27
• /
• 2021

Subsurface rock produces heat from the decay of radioactive isotopes in constituent minerals and gamma-ray emissions, of which the magnitude is dominated by the contents of the major radioactive isotopes (e.g., U, Th, and K). The heat production is generally calculated from the rock density and contents of major isotopes, which can be determined by mass spectrometry of drilled core samples or rock fragments. However, such methods are not easily applicable to deep boreholes because core samples recovered from depths of several hundred meters to a few kilometers are rarely available. A geophysical logging technique for boreholes is available where the U, Th, and K contents are measured from the gamma-ray spectrum. However, this technique requires the density to be measured separately, and the measurement depth of the equipment is still limited. As an alternative method, a normal gamma-ray logging tool was adopted to estimate the heat production from the total gamma activity, which is relatively easy to measure. This technical report introduces the development of the proposed method for evaluating the heat production of a granitic rock mass with domestic commercial borehole logging tools, as well as its application to a ~2 km deep borehole for verification.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.261-273
• /
• 1998

Multiple well log analysis technique consisting of geophysical well log and geological core log has been made to analysis the discontinuities of a test borehole-PABH1 located in Pungam sedimentary basin, Sosok, Hongchon-gun, Kangwon Province. Well log methods consist of normal resistivity log, focussed log, single point resistance log, SP log, gamma log, natural gamma log as well as acoustic televiewer log and borehole television log. Core scanning technique was used as an aid for geological core log. The analysis was made by comparing firstly the televiewer and core discontinuities, and then the results from conventional geophysical log analysis were compared to those from core log and acoustic televiewer log. Fractures deduced from the acoustic televiewer log coincide well with discontinuities shown on the core and conventional geophysical logs. Particularly close coincidence could be observed between fractures derived from acoustic televiewer and conventional geophysical log analysis. It has been noted that the geophysical logs such as, caliper, resistivity, density and high resolution gamma gamma curves are effective in delineating the fractures. For example the ratio between density and resistivity (BRD/SHN) provides also an alternative indicator for discerning the fracture condition in the study area.

• Geophysics and Geophysical Exploration
• /
• v.3 no.3
• /
• pp.101-111
• /
• 2000

In order to assess the seawater intrusion, induction, temperature and conductivity of fluid, and natural gamma logs were obtained in nine wells at the three study areas having different hydrogeologic characteristics. Besides surface geophysical exploration, supplementary geophysical well logs were carried out to understand the hydrogeological characteristics related to the seawater intrusion in the study areas. The geophysical well logs have been proved to increase the accuracy of interpretation of the surface geophyscial exploration's data for assessment of seawater intrusion, and to get the optimum depth for a long monitoring of groundwater. They, also, revealed that the identification of hydrogeological units for strata's porosity was able to be achieved and were illustrated the applicability of geophysical well logs monitoring. Finally, geophysical well logs are expected to play to get the more quantitative information of seawater infusion, if it is fully collaborated with a better method that is strata's resistivity determination with not relatively much effected by seawater within the drilled borehole and that is the porosity measurement with built on small diameter PVC casing.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.332-344
• /
• 2007

Various geophysical well logs have been made along the four deep wells in Pohang, Gyeongbuk. The primary focus of geophysical well loggings was to improve understanding the subsurface geologic structure, to evaluate in situ physical properties, and to estimate aquifer production zones using fluid temperature and conductivity gradient logs. Especially natural gamma logs interpreted with core logs of borehole BH-1 were useful to discriminate the lithology and to determine the lithologic sequences and boundaries consisting of semi-consolidated Tertiary sediments and intrusive rocks such as basic dyke and Cretaceous sediments. Cross-plot of physical properties inferred from geophysical well logs were used to identify rock types such as Cretaceous sandstone and mudstone, Tertiary sediments, rhyolite, and basic dyke. The temperature log indicated $82.51^{\circ}C$ at the depth of 1,981.3 meters in borehole BH-4. However, considering the temperature of borehole BH-2 measured under stable condition, we expect the temperature at the depth in borehole BH-4, if it is measured in stable condition, to be about 5 or $6^{\circ}C$ higher. Several permeable fractures also have been identified from temperature and conductivity gradient logs, and cutting logs.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.219-226
• /
• 2012

This study provides an analysis on results of neutron logging for various borehole environments through numerical simulation based on a Monte Carlo N-Particle (MCNP) code developed and maintained by Los Alamos National Laboratory. MCNP is suitable for the simulation of neutron logging since the algorithm can simulate transport of nuclear particles in three-dimensional geometry. Rather than simulating a specific tool of a particular service company between many commercial neutron tools, we have constructed a generic thermal neutron tool characterizing commercial tools. This study makes calibration chart of the neutron logging tool for materials (e.g., limestone, sandstone and dolomite) with various porosities. Further, we provides correction charts for the generic neutron logging tool to analyze responses of the tool under various borehole conditions by considering brine-filled borehole fluid and void water, and presence of borehole fluid.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.263-266
• /
• 2003

균열암반내의 수리적 유동 특성을 파악하기 위하여 다양한 물리검층을 수행하였다. 물리검층법은 시추공 주변 지층이나 공내수의 물리적 또는 유동 특성의 연속적인 측정이 가능한 장점을 지니고 있어 최근 지하수 조사나 환경오염 분야에 활용이 점점 증가하는 추세이다. 본 연구는 균열 암반내에서 지하수의 유동 특성 파악에 효과적인 Heat-pulse type의 유향ㆍ유속검층을 이용하여 시추공과 교차하는 파쇄대의 수리적인 연결 특성을 파악하였다. 특히, 양수를 병행하면서 취득한 유향ㆍ유속검층 자료는 시추공내로 지하수가 유입 또는 유출되는 구간을 정확하게 파악할 수 있었다. 이들 결과는 지하수 수치모델 설정, 각종 공내 수리시험 등에 중요한 정보를 제공할 수 있을 것으로 기대된다.

• The Journal of Engineering Geology
• /
• v.8 no.1
• /
• pp.87-98
• /
• 1998

Multiple logging techniques consisting of geophysical logs, care logs, physical property measurements on core samples have been adopted on a test borehole drilled in the Pungam basin ; a small Cretaceous sedimentary basin located in Sosok area, Hongchon-gun, Kangwon Province, Korea. This study has been made to solve the problem of mismatches between the results of geophysical log and core log analyses. And the cause and range of depth errors as well as logging responses were studied. The result shows that the depth error caused by geophysical log is so small that it can be used as a reliable depth criterion in the borehole. The analysis of physical property measurements is also shown as very effective in determining the real depth and the geology of the borehole.