• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.65-73
• /
• 2010

To observe and analyze the characteristics of cloud and precipitation properties, the Cloud physics Observation System (CPOS) has been operated from December 2003 at Daegwallyeong ($37.4^{\circ}N$, $128.4^{\circ}E$, 842 m) in the Taebaek Mountains. The major instruments of CPOS are follows: Forward Scattering Spectrometer Probe (FSSP), Optical Particle Counter (OPC), Visibility Sensor (VS), PARSIVEL disdrometer, Microwave Radiometer (MWR), and Micro Rain Radar (MRR). The former four instruments (FSSP, OPC, visibility sensor, and PARSIVEL) are for the observation and analysis of characteristics of the ground cloud (fog) and precipitation, and the others are for the vertical cloud characteristics (http://weamod.metri.re.kr) in real time. For verification of CPOS products, the comparison between the instrumental products has been conducted: the qualitative size distributions of FSSP and OPC during the hygroscopic seeding experiments, the precipitable water vapors of MWR and radiosonde, and the rainfall rates of the PARSIVEL(or MRR) and rain gauge. Most of comparisons show a good agreement with the correlation coefficient more than 0.7. These reliable CPOS products will be useful for the cloud-related studies such as the cloud-aerosol indirect effect or cloud seeding. The visibility value is derived from the droplet size distribution of FSSP. The derived FSSP visibility shows the constant overestimation by 1.7 to 1.9 times compared with the values of two visibility sensors (SVS (Sentry Visibility Sensor) and PWD22 (Present Weather Detect 22)). We believe this bias is come from the limitation of the droplet size range ($2{\sim}47\;{\mu}m$) measured by FSSP. Further studies are needed after introducing new instruments with other ranges.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.152-152
• /
• 2017

본 연구에서는 비례제어밸브를 이용한 자율주행 트랙터 조향 시스템 제어를 위하여 저가의 임베디드 시스템을 사용한 제어기를 개발하였다. 차륜의 조향각 측정을 위하여 전륜 킹핀에 포텐시오미터를 설치하였으며, 비례제어밸브는 -10 ~ +10V의 전압으로 밸브 스풀의 위치제어를 수행하도록 하였다. 조향각 측정과 비례제어밸브의 위치제어를 위하여 각각에 AT90CAN128 AVR보드를 사용하였으며, CAN통신으로 조향각 데이터가 비례제어밸브 제어용 데이터로 전송될 수 있도록 하였다. 비례제어밸브 제어 보드에는 DAC기능을 추가하였으며 0 ~ 5V의 출력을 -10 ~ +10V의 전압으로 변환해 주는 인터페이스회로를 추가하였다. 일반적으로 GPS 등의 데이터 수신율이 20 Hz인 점을 감안하여 비례제어 밸브는 50 ms의 주기로 P-제어를 수행할 수 있도록 하였다. 향후 트랙터의 방향각을 설정하는 또 하나의 시스템으로부터 목표 조향각을 부여받는 것을 가상하여 별도의 MCU를 통해 목표 조향각을 송신한 후, 조향 유압실린더에 의한 전륜의 조향각 시간 응답 특성을 조사하였다. 실험은 트랙터의 전륜을 지면으로부터 들어올린 무 부하 상태에서 진행하였으며, 목표 조향각은 $7.5^{\circ}$, $15.0^{\circ}$, $22.5^{\circ}$ 등 3단계로 변경하며 시간응답 특성을 측정하였다. 최대 오버슈트 11%, 최소 오버슈트 8.6%, 정상상태 오차 약 $0.825^{\circ}$, 시정수(Time Constant)는 3단계의 목표 조향각 설정에서 각각 0.706초, 0.488초, 0.38초로 나타났다.

• Korean journal of food and cookery science
• /
• v.16 no.2
• /
• pp.195-201
• /
• 2000

An investigation was conducted to evaluate the hygienic status of university foodservice operation by using conventional swabbing technique plus standard plate count and ATP bioluminescence assay. The results of the study were as follows: 1) For all kitchen boards, knives, feeding trays, and dish towels tested, there was an overall agreement at 84.7% level between the results obtained using ATP bioluminescence and plate count when using a pass/fail cut-off of 3$\times$ control values for ATP assay and 40 CFU(colony forming unit)/㎠ for plate count. 2) The agrement rate between ATP assay and standard plate count was 87.5% for the samples before use, 29.2% for those during use, and 42.7% for those after cleaning and sanitizing. 3) The plate counts of three university foodservice operations for kitchen board, kitchen knife, feeding tray and dish towel were within the acceptable limits when tested before using. However, none of them were within the acceptable limits when tested during using and after cleaning and sanitizing. 4) Above results suggested that an immediate action needs to be taken to reduce the potential danger of cross-contamination and also effective sanitary control methods needs to be developed to improve the sanitary condition.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1849-1858
• /
• 2021

We analyzed the monthly and annual trends of the meteorological factors(wind speeds and directions and air temperatures) measured at an automated synoptic observation system (ASOS) and fine particle (PM₁₀ and PM_2.5) concentrations measured at the air quality monitoring systems(AQMSs) in Suwon. In addition, we investigated how the fine particle concentrations were related to the meteorological factors as well as urban morphological parameters (fractions of building volume and road area). We calculated the total volume of buildings and the total area of the roads in the area of 2 km × 2 km centered at each AQMS using the geographic information system and environmental geographic information system. The analysis of the meteorological factors showed that the dominant wind directions at the ASOS were westerly and northwesterly and that the average wind speed was strong in Spring. The measured fine particle concentrations were low in Summer and early Autumn (July to September) and high in Spring and Winter. In 2020, the annual mean fine particle concentration was lowest at most AQMSs. The fine particle concentrations were negatively and weakly correlated with the measured wind speeds and air temperatures (the correlation between PM_2.5 concentrations and air temperatures was relatively strong). In Suwon city, at least for 6 AQMSs except for the RAQMS 131116 and AQMS 131118, the PM₁₀ concentrations were affected mainly by the transport from outside rather than primary emission from mobile sources or wind speed decrease caused by buildings and, in the case of PM_2.5, vise versa.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.311-317
• /
• 2005

NC controller parameters are fixed when the controller is combined with a machine. However, the characteristics of controller could be changed as it has being used by the machine or other environmental conditions. Ultimately, it results in tool positioning accuracy changing. The loading torque in servo motor also influences on the positioning accuracy. This study focus on a measuring and analysing method for verifying the angular positioning accuracy of NC servo motor. We used a high resolution A/D converter for acquiring analogue signal of rotary encoder in servo motor. Generating tool path by the combination of axial movements (X,Y,Z) is compared with the encoder signals with the servo motor torque. The current variation signal is also read from the servo motor power using a hall sensor and converted to the motor torque. The method of analysing proposed in this study will be used for determining the gains (tuning) of parameter in NC controller, when the controller is set up at a machine initially or the controller condition is changed during the work.

• Journal of Environmental Science International
• /
• v.9 no.5
• /
• pp.385-388
• /
• 2000

Visibility reduction is a barometer of air pollution which people can notice easily. First of all we need to measure quantified visibility continuously in order to examine visibility reduction. Prevailing visibility is not practical to measure visibility depending on observer's expertness. Scattering visibility using Forward Scattering Meter(Belfort Visibility Sensor 6230) has been measured at Kwangan-Dong in Pusan and analysed since July 1998. According to the analysis the correlation coefficient(R) between prevailing visibility and scattering visibility was 0.7235. The visibility appeared that each frequency of poor visibility(under 6km) and good visibility(over 25km) was 10.6%, 9.7% on summertime in Pusan and the visibility range from 10km to 20km ranked high frequency as a half of whole ranges. The order of correlation coefficients between visibility an air pollutants are ranking CO. PM10 and NO2 that values are 0.5878, 0.5369,l 0.5284 respectively. In meteorolgical factor the case of poor visibility presented more weakly wind speed and higher relative humidity than the case of good visibility. The correlation coefficient between calculated visibility of multiple linear regression model and observed visibility was 0.7215. But the trend of calculated and observed visibility variation was similar with the exception of several good visibility cases.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.1
• /
• pp.32-40
• /
• 1994

Continuous measurements of the extinction coefficient( $b_{ext}$ ) and scattering coefficient due to Particle( $b_{sp}$ ) were made during the fall 1993 in Seoul along with the measurements of the size distribution, ionic composition of particles. On the average, $b_{sp}$ values are 55% and 79% of $b_{ext}$ values during the clear and smoggy Periods respectively. Also the average values of $b_{ext}$ and $b_{sp}$ were 0.791$\times$10$^{-3}$ $m^{-1}$ (visual range 4.9km) and 0.628$\times$10$^{-3}$ $m^{-1}$ (visual range 6.2km) during the smoggy Period, and 0.297$\times$10$^{-3}$ $m^{-1}$ (visual range 13.1km) and 0.164$\times$10$^{-3}$ $m^{-1}$ (visual range 23.8km) during the clear period, respectively. The Peak at about 1${\mu}{\textrm}{m}$ of the Particle size distribution during the smoggy period is about four times higher than that during the clear period while the peaks at about 5${\mu}{\textrm}{m}$ during both periods are similar. Also, the concentrations of sulfate and nitrate at about 1${\mu}{\textrm}{m}$ during the smoggy Period are much higher than these during the clear Period.eriod.

• Journal of Korean Academy of Nursing
• /
• v.18 no.2
• /
• pp.211-219
• /
• 1988

운동학습이론인 감각운동 통합이론을 본 연구의 개념적 틀로하여 한방병원에 입원한 뇌졸중 환자 중 구강인두 기능이 저하된 환자를 대상으로 감각운동자극이 구강인두 기능에 미치는 효과를 조사하기 위하여 1988년 3월초부터 5월 중순까지 예비실험 연구하였다. 감각운동자극을 주기 전에 구강인두기능을 시정하고 대상자 전원에게 저하된 구강인두기능에 따라 감각운동자극을 선택하여 하루 3번 매식후 30분전에 주었으며, 이를 일주일 동안 계속하였다. 일주일 후 다시 구강인두기능을 측정하여 자극을 주기전, 후의 기능정도를 paired t-test로 비교 분석하였으며 다음과 같은 성적을 얻었다. 1. “자극을 주기 전보다 준 후에 머리와 목운동 조절점수가 높을 것이다”라는 제1가설은 지지되었다(t＝-2.71, df＝5, p＝.042). 2. “자극을 주기 전보다 준 후에 씹는 능력이 증가되었으나, 통계적으로는 유의하지 않았다(t＝-2.00, df＝5, p＝.102). 3. “자극을 주기 전보다 준 후에 입술운동의 조절점수는 높을 것이다”라는 제3가설은 지지되었다(t＝-4.77, df＝5, p＝.005). 4. “자극을 주기 전보다 준 후에 혀 운동 조절점수가 높을 것이다”라는 제4가설은 지지되었다(t＝-3.61, df＝5, p＝.015). 5. 자극을 주기 전보다 준 후에 연하능력이 증가되었으나 통계적으로는 유의하지 않았다(t＝-2.24, df＝5, p＝.076). 이상의 결과로 감각운동자극은 연하장애환자의 구강인두기능을 증진시키는데 효과적인 방법이라고 할 수 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.66-72
• /
• 2003

The global assessment system for medium voltage power cable systems has been developed The minimum purpose of diagnostic activity is the economic discrimination and maintenance of bad cables which is likely to cause cable system failure. I have adapted the Aging Time Constant Method to construct the power cable assessment system for the diagnostic purpose. From the field application test and breakdown test results, it could be concluded that the diagnostic system was successful art convenient for the discrimination and maintenance of the bad cables, which is likely to fail sooner or later, economically.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.428-433
• /
• 2003

In this study. we empirically compared and investigated the impacts and effects of M&A between the merging firms and the merged firms during the period from 1990 to 1997 which the developed countries' market principles were adopted and more autonomous and competitive M&A market were activated. For this purpose, this paper has set hypothesis and tested by analyzing those AAR, and CARs employing both market model and market adjusted model. The empirical results revealed in this research show that the CAR is more positive for merged firms than merging firms which are contrast with results of previous studies researched in 1980s.