• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.23-28
• /
• 2023

In a wireless smart utility network communication system, an asynchronous low power MAC is standardized and used according to IEEE 802.15.4e. An asynchronous MAC called RIT (Receiver Initiated Transmission) has a characteristic in which delay time and power consumption are greatly affected by a check-in interval (RIT period). By waking up from sleep every check-in interval and checking whether there is data to be received, power consumption in the receiving end can be drastically reduced, but power consumption in the transmitting end occurs due to an excessive wakeup sequence. If an excessive wake-up sequence is reduced by shortening the check interval, power consumption of the receiving end increases due to too frequent wake-up. In the RIT asynchronous MAC technique, power consumption performance according to traffic load and operation of check-in interval is analyzed and applied to Wi-SUN construction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.306-309
• /
• 2022

Recently, the frequency of earthquakes is rapidly increasing in Korea. As a result, concerns about earthquakes are increasing. Response and recovery in the event of an earthquake are also important, but it is necessary to identify management vulnerabilities in advance and perform prevention and preparation activities. K-water collects real-time earthquake data by operating an earthquake accelerator to manage facilities safe from earthquakes. In addition, real-time data is transmitted to external organizations. Therefore, various efforts are being made to improve the quality of data. In order to reduce the management vulnerability of the earthquake monitoring system in advance, high-quality data can be produced by minimizing the delay time of data collection and establishing a real-time quality analysis system and base for earthquake data using big data. Accordingly, it is expected to protect the lives and property of the people from earthquake disasters by securing dam safety management and high-quality earthquake data and providing rapid data to external institutions.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.1
• /
• pp.26-31
• /
• 2022

Changwon City has the second highest accident rate with 79.6 according to the city bus accident rate. In fact, 250,000 people use the city bus a day in Changwon, The number of accidents is increasing gradually. In addition, a recent fire accident occurred in the engine room of a city bus (CNG) in Changwon, which has gradually expanded the public's anxiety. In the case of business vehicles, the government conducts inspections with a short inspection cycle for the purpose of periodic safety inspections, etc., but it is not in the monitoring stage. In the case of city buses, the operation records are monitored using Digital Tacho Graph (DTG). As such, driving records, methods, etc. are continuously monitored, but inspections are conducted every six months to ascertain the safety and performance of automobiles. It is difficult to identify real-time information on automobile safety. Therefore, in this study, individual automobile management solutions are presented through machine learning techniques of inspection results based on driving records or habits by linking DTG data and Vehicle Inspection Management System (VIMS) data for city buses in Changwon from 2019 to 2020.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.3
• /
• pp.99-104
• /
• 2022

Convolutional neural network (CNN) generally uses two-stream architecture RGB and optical flow stream for its action recognition function. RGB frames stream display appearance and optical flow stream interprets its action. However, the standard method of using optical flow is costly in its computational time and latency associated with increased action recognition. The purpose of the study was to evaluate a novel way to create a two sub-networks in neural networks. The optical flow sub-network was assigned as a teacher and the RGB frames as a student. In the training stage, the optical flow sub-network extracts features through the teacher sub-network and transmits the information to student sub-network for baseline training. In the test stage, only student sub-network was operational with decreased in latency without computing optical flow. Experimental results shows that our network fed only by RGB stream gets a competitive accuracy of 54.5% on HMDB51, which is 1.5 times better than that on R3D-18.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.143-149
• /
• 2022

In this paper, we evaluate the underwater frequency diversity communication performance of Selective Combination (SC) using Maximum Likelihood Estimation (MLE). In an underwater multipath frequency selective channel, destructive interference fading due to delay spread of a received signal affects the increase in error and Signal to Noise Ratio (SNR) variability of an underwater acoustic communication. Selective Combination frequency diversity using a single sensor is applied as a transmission performance improvement technique according to the frequency selectivity of a channel. In the sea experiment applying MLE for SC decision value extraction, we evaluate the performance of SC frequency diversity and MLE-SC frequency diversity. In experiment result, we confirm through experiment that the Bit Error Rate (BER) is relatively lower when the decision value extracted through MLE-SC is applied than when the SC decision value is fixed.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.187-194
• /
• 2016

The purpose of this study was to analyze temperature distribution characteristics using a model swine housing for temperature sensor adjustable positioning and developed a sensor and controller embedded exhaust fans utilizing ICT fusion technology for windowless swine housing. Temperature measured by the sensor attached on the exhaust fan was also determined that there is no problem, the temperature is located in the upper fan given the measured errors shown in the 1℃ temperature difference between the lower temperature than the other positions in the model swine housing. The performance of the exhaust fan at maximum output was found to be 1920rpm, air flow rate 125㎥/min. When the open area ratio of 70% one proper air volume of the exhaust fan was found to be 75㎥/min, 60pa. Maximum efficiency in all of the output of the exhaust fan is exhibited at about 70% open area ratio of the damper. The number of revolution of the exhaust fan was 1920rpm when the output was a maximum of 100%. AC output phase of the pulse duty ratio change of the controller was shown to change without delay. It was determined that the instant fan speed control is possible.

• Design Convergence Study
• /
• v.13 no.5
• /
• pp.131-145
• /
• 2014

Considering the number of population commuting from Gyeonggi to Seoul, the development of the bus system is relatively slow. There are many problems to be solved but it has been overlooked, leaving the users in discomfort. The goal of this research is to improve the current system to satisfy the unmet needs, using HCI methods, which is composed of five steps, including Define, Find, Analyze & Synthesize, Ideation, Develop. In Define, we recruited the interviewees using the extreme user method to find their needs. In Find, we proceeded 'be the customer', shadowing for background research and in-depth interview. In Analyze & Synthesis, we analyzed the customer needs and clustered to similar needs to draw useful ideas. After that we suggested sophisticated ideas based on design principles from previous stage and visualized in user scenarios and mock-ups. Overall, the research suggests with text message service, informative light service and mobile application to improve the existing bus station.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.313-314
• /
• 2022

The intelligent maritime traffic information service provides a service to prevent collisions and stranding of ships based on the location information of ships periodically collected from ship equipment such as LTE-Maritime transceivers and AIS installed on ships. provided in real time. However, the above service may reduce the reliability of ship location information because GPS location information for measuring the ship's location may be cut off during transmission through LTE-Maritime or AIS networks, or phenomena such as location jumps and delays may occur. This study aims to estimate reliable position information to some extent even in an abnormal section through ship position prediction based on the existing received position information using the Kalman filter, which is an optimal estimation filter based on probability.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.38-38
• /
• 2020

본 연구는 영농형 태양광 발전시스템 적용을 위한 하부작물의 재배효율을 검토하기 위하여 중산간지역 재배지(전라남도 순천시 승주읍 월계리 소재)에 설치한 추적식 영농형 태양광 발전시설 하부에 주식량자원식물인 벼품종 새일미를 2018년 6월 16일 이앙하여 생육을 조사하였다. 2018년 7월 24일 기준, 초장(plant height)은 태양광 시설 하에서 대조구보다 길게 나타났고, 태양광발전시설 중심축에 가까울수록 웃자람(도장)을 보였다. 엽수는 음영지역에서 대조구에 비해 잎의 전개가 늦게 나타났으며, 수확기에 조사한 간장(culm length)은 음영이 강한 지역에서는 대조구에 비해 작게 나타났으나 음영이 약한 지역으로 갈수록 간장이 증가하여 대조구와 비슷하거나 약간 크게 나타났다. 수장(panicle length)은 대조구 대비 처리구와 큰 차이가 없었으며, 태양광발전시설 중심축의 남쪽인 경우 강한 음영지역에서 약한 음영지역으로 갈수록 길게 나타났다. 동년 8월24일 기준 처리구 동쪽의 출수(heading)율은 강한 음영지역(중심축으로부터 1~3m 떨어진 구간)에서 가장 낮았고, 중심축으로부터 멀어질수록 높게 나타났다. 이와 같이 태양광발전시설 설치구역에서는 음영이 강할수록 생장이 미흡하여 유효분얼수가 감소하고, 출수가 지연되었다. 이에 따라서 음영이 강한 구역일수록 수량구성 4요소 중에 등숙율을 제외한 단당이삭수, 수당평균영화수, 천립중이 감소하였다. 태양광발전시설 중심축으로부터 멀어질수록 음영강도가 약해져서 수량감소가 낮아졌으며, 또한 동서남북 방향에 따라 그 감소율이 다르게 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.801-809
• /
• 2023

Road construction projects have a long duration so cost overruns and schedule delays are occurred. However, performance assessment system that can manage and prepare for this in advance is insufficient. In addition, road construction are affected by many factors during under construction. Therefore it is necessary to conduct performance assessment considering the characteristics of roads and prepare for similar projects in the future. The purpose of this study is to provide a framework to evaluate construction phase performance and present a performance management plan using road construction information. Also, This study conducted time adjustment between the start and the finish of the project and developed performance metrics based on absolute and relative indicator. This study analyzed the cost, schedule, and changes of the road project construction process, showing the possibility of advancement of performance assessment and how to use it when planning new road construction projects.