• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.447-454
• /
• 2013

The geolocation accuracy of SAR satellite imagery is affected by orbit and sensor information and external variables such as DEM accuracy and atmospheric delay. To predict geolocation accuracy of KOMPSAT-5 and KOMPSAT-6, this paper uses TerraSAR-X imagery which has similar spec. Simulation data for sensitivity analysis are generated using range equation and doppler equation with several key error sources. As a result of simulation analysis, the effect of sensor information error is larger than orbit information error. Especially, onboard electronic delay needs to be monitored periodically because this error affects geolocation accuracy of slant range direction by 30m. Additionally, DEM accuracy causes geolocation error by 20~30m in mountainous area and atmospheric delay can occur by 5m in response to atmospheric condition and incidence angle.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.156-161
• /
• 2009

This paper proposes a new method about performance improvement of soccer robots system by the revision of lens distortion most commonly occurred in camera and the revision of position and angle error in robot patch for the realization of robot position. Among the lens distortions, we revise geometrical distortion and apply it to soccer robots system for realtime environment. Patch used in the recognition and the distinction for coordination and direction of robot occurs a position and angle error according to the figure of it. In this paper, we suggest the method of reduction for position and angle error of robot by improved patch and verify its propriety through the experiment.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.63-67
• /
• 2016

Recently, BLE beacons are widely used in indoor precision positioning systems because of their low battery consumption and low infrastructure cost. However, existing BLE beacon based indoor positioning algorithms are difficult to compensate for position errors due to the user's moving speed. Therefore, we proposed a position error correction algorithm that combines bounced cancellation and minimum distance maintenance algorithm with a positioning error correction method using direction vectors. Experimental results show that the proposed algorithm guarantees superior positioning performance than the existing indoor positioning algorithm and also improves the performance of position error compensation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.18-30
• /
• 2004

In this paper, the calibration problem of an asynchronous CDMA-based antenna array is studied. A new iterative calibration algorithm for antenna array in the presence of frequency offset error is presented. The algorithm is applicable to a non-linear array and does not require a prior knowledge of the (direction of arrivals) DOAs of the signals of any user, and it only requires the code sequence of a reference user. The algorithm is based on the two step procedures, one for estimating both channel and frequency offset and the other for estimating the unknown array gain and phase. Consequently, estimates of the DOAs, the multi-path impulse response of the reference signal sources, and the carrier frequency offset as well as the calibration of antenna array are provided. The performance of the proposed algorithm is investigated by means of computer simulations and is verified by using field data measured through a custom-built W-CDMA test-bed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.31-36
• /
• 2014

A study on the indoor positioning system has been active recently for the location based service indoors. In the 3 dimensional positioning system based on the acoustic signal and TDOA technology, the error characteristics of the estimated source position would be changed depending on the number of microphones and the pattern of the microphone array. In this paper, the estimated position error according to the measured distance error between the microphones and the signal source is analyzed, and the optimum microphone array is decided considering the estimated position error patterns and the total amount of the estimated position error.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.54-56
• /
• 2012

본 논문에서는 위치인식 센서기반 무인이송차량(AGV)의 이동 제어 문제를 다루고자 한다. AGV의 진행 경로를 지시하는 랜드마크를 부착할 때 사각지역(dead zone) 및 중첩 지역(overlap zone)이 존재할 경우 위치 추정 오차가 허용 범위를 크게 벗어나게 되며, 이로 인해 AGV가 오동작하는 현상이 발생한다. 이를 해결하기 위해 본 논문에서는 단일 랜드마크 대신 이웃한 2개의 랜드마크 인식을 통해 위치 추정 오차를 보정하는 방안을 제안하였다. 또한, 회전 구간에서 AGV가 방향 전환 직후 지정된 경로에 허용오차 범위 이내로 진입하도록 안쪽 바퀴와 바깥쪽 바퀴의 가속도 제어 알고리즘을 제안하였다. 본 논문에서 개발된 시스템은 화장장 시신 운구용 AGV에 적용하였다. 화장장은 기존 산업 현장에 비해 이동 공간이 협소할 뿐만 아니라 그 특성상 정밀 제어가 필요한 환경이다. 본 논문에서 제안한 방식은 모의 차량에 적용하여 그 타당성을 검증하였으며, 실제 국내 화장장에 AGV 시스템을 적용한 결과 허용오차 범위 이내에서 정상 동작함을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.773-781
• /
• 2000

The average bit error rate of wideband CDMA in forward link is evaluated for frequency and timing errors in multipath Rayleigh fading channel. The channel BER is evaluated analytically and information BER is investigated with simulation. The performance degradation due to the code/frequency synchronization errors was obtained through simulation for particular two coding schemes - convolutional codes and turbo codes. The results show 1dB degradation due to Tc/4 timing error and 0.5dB degradation due to 50Hz frequency error, for both coding schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.155-163
• /
• 2009

OFDM System is a promising transmission technique due to its spectral efficiency But, a major disadvantage of the OFDM system is its sensitivity to frequency offset and phase noise that makes intercarrier interference (ICI), which degrades the system performance severely The ICI self-cancellation method has a good performance with frequency offset or phase noise. This paper proposed the N/2 spacing data-conjugate method that works well in large frequency offset and phase noise (normalized frequency offset=0.2-0.4, phase noise standard deviation=about lodes). Also, an efficiency ICI cancellation method using pilot was proposed. Simulation results confirm that performance of the proposed scheme is better than conventional schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.299-311
• /
• 2011

In this paper, we have identified the system instability factors in a bistatic radar system using pulse chasing and considered their effects on the bistatic receiver's MTI(Moving Target Indication) improvement performance. The pulse chasing is a scan method that searchs a restricted area on the transmit pulse-to-pulse basis and the MTI filter is a signal processing that separates a target from some kinds of interferences such as clutter using small number of transmit pulses. Ideal MTI processing performance, e.g., clutter attenuation and improvement, has been limited by the property of the clutter itself, however, the MTI performance in a proposed bistatic receiver configuration could be affected by the receiving beam pointing error during pulse chasing scanning. Also, for the bistatic receiver, we have defined other system instability factors, which result from the time synchronization error, COHO's phase error, the frequency/phase synchronization error, and have analyzed their effects on the system performance improvement.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.367-373
• /
• 2013

Wide area differential GNSS(WA-DGNSS) collects GPS measurements from the several reference stations and estimates 3-D satellite orbit error, satellite clock error, ionospheric delay. These correction messages are broadcasted to user, then user can have more accurate and reliable position estimates. The performance of WA-DGPS can be changed depending on the position of reference stations. To select proper reference stations, performance analysis with the change of reference stations is necessary. In this paper, changing the geographical location of reference stations, we carried out simulation based test and show the performance of WA-DGNSS in Korea.