• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.187-196
• /
• 2020

In order to manage information security risk, various information security level evaluation and information security management system certification have been conducted on a larger scale than ever. However, there are continuous cases of infringement of information protection for companies with excellent information security evaluation and companies with excellent information security management system certification. The existing information security risk management methodology identifies and analyzes risks by identifying information assets inside the information system. Existing information security risk management methodology lacks a review of where cyber threats come from and whether security devices are properly operated for each route. In order to improve the current risk management plan, it is necessary to look at where cyber threats come from and improve the containment level for each inflow section to absolutely reduce unnecessary cyber threats. In addition, it is essential to measure and improve the appropriate configuration and operational level of security equipment that is currently overlooked in the risk management methodology. It is necessary to block and enter cyber threats as much as possible, and to detect and respond to cyber threats that inevitably pass through open niches and use security devices. Therefore, this paper proposes additional evaluation items for evaluating the containment level against cyber threats in the ISMS-P authentication items and vulnerability analysis and evaluation items for major information and communication infrastructures, and evaluates the level of security equipment configuration for each inflow.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1283-1297
• /
• 2023

Mid-wave infrared (MWIR) imagery, due to its ability to capture the temperature of land cover and objects, serves as a crucial data source in various fields including environmental monitoring and defense. The KOMPSAT-3A satellite acquires MWIR imagery with high spatial resolution compared to other satellites. However, the limited spatial resolution of MWIR imagery, in comparison to electro-optical (EO) imagery, constrains the optimal utilization of the KOMPSAT-3A data. This study aims to create a highly visible MWIR fusion image by leveraging the edge information from the KOMPSAT-3A panchromatic (PAN) image. Preprocessing is implemented to mitigate the relative geometric errors between the PAN and MWIR images. Subsequently, we employ a pre-trained pixel difference network (PiDiNet), a deep learning-based edge information extraction technique, to extract the boundaries of objects from the preprocessed PAN images. The MWIR fusion imagery is then generated by emphasizing the brightness value corresponding to the edge information of the PAN image. To evaluate the proposed method, the MWIR fusion images were generated in three different sites. As a result, the boundaries of terrain and objects in the MWIR fusion images were emphasized to provide detailed thermal information of the interest area. Especially, the MWIR fusion image provided the thermal information of objects such as airplanes and ships which are hard to detect in the original MWIR images. This study demonstrated that the proposed method could generate a single image that combines visible details from an EO image and thermal information from an MWIR image, which contributes to increasing the usage of MWIR imagery.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.202-213
• /
• 2007

A network is an important model widely used in natural and social science as well as engineering. To analyze these networks easily it is necessary that we should layout the features of networks visually. These Graph-Layout researches have been performed recently according to the development of the computer technology. Among them, the Scale-free Network that stands out in these days is widely used in analyzing and understanding the complicated situations in various fields. The Scale-free Network is featured in two points. The first, the number of link(Degree) shows the Power-function distribution. The second, the network has the hub that has multiple links. Consequently, it is important for us to represent the hub visually in Scale-free Network but the existing Graph-layout algorithms only represent clusters for the present. Therefor in this thesis we suggest Graph-layout algorithm that effectively presents the Scale-free network. The Hubity(hub+ity) repulsive force between hubs in suggested algorithm in this thesis is in inverse proportion to the distance, and if the degree of hubs increases in a times the Hubity repulsive force between hubs is ${\alpha}^{\gamma}$ times (${\gamma}$??is a connection line index). Also, if the algorithm has the counter that controls the force in proportion to the total node number and the total link number, The Hubity repulsive force is independent of the scale of a network. The proposed algorithm is compared with Graph-layout algorithm through an experiment. The experimental process is as follows: First of all, make out the hub that exists in the network or not. Check out the connection line index to recognize the existence of hub, and then if the value of connection line index is between 2 and 3, then conclude the Scale-free network that has a hub. And then use the suggested algorithm. In result, We validated that the proposed Graph-layout algorithm showed the Scale-free network more effectively than the existing cluster-centered algorithms[Noack, etc.].

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.539-550
• /
• 2014

High resolution satellite images have to be oriented and geometrically processed from GCPs(Ground Control Points) to generate precise DEMs(Digital Elevation Models) and topographic maps. In Korea, thousands of national UCPS(Unified Control Points) are established and distributed all over the country by the Korean NGII(National Geographic Information Institute). For that reason, UCPs can be easily searched and downloaded by the national-control-point-record-issues system. Following the study, we suggested the sky-view and road-view from web-portals for searching and identifying UCPs on the images. To evaluate the usefulness of UCPs in RPCs(rational polynomial coefficients) adjustment of the high resolution satellite images, the one UCP, which of using simple the control point, has been applied to adjust the vendor-provided RPCs of the KOMPSAT-3 images. As a result, the positioning error of corrected RPCs was approximately one pixel and one meter. From this experiment, we conclude that the UCPs will be able to replace the survey GCPs for mapping with the satellite images or aerial images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.740-745
• /
• 2016

Cables are installed for tens of thousands of connections between various pieces of equipment to operate and control a commercial ship. The correct shortest-route data is necessary since these are complicated cable installations. Therefore, an overfill interval commonly exists in the shortest paths for cables as estimated by Dijkstra's algorithm, even if this algorithm is generally used. It is difficult for an electrical engineer to find the overfill interval in 3D cable models because the occupancy rate data exist in a data sheet unlinked to three-dimensional (3D) computer-aided design (CAD). The purpose of this study is to suggest a visualization method that displays the cable path and overfill interval in 3D CAD. This method also provides various color visualizations for different overfill ranges to easily determine the overfill interval. This method can reduce cable-installation man-hours from 7,000 to 5,600 thanks to a decreased re-installation rate, because the cable length calculation's accuracy is raised through fast and accurate reviews based on 3D cable visualization. As a result, material costs can also be reduced.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.237-246
• /
• 2020

this paper, a data modeling method based on decision-making conditions is proposed for making combat and battlefield management systems to be intelligent, which are also a decision-making support system. A picture of a robot seeing and perceiving like humans and arriving a point it wanted can be understood and be felt in body. However, we can't find an example of implementing a decision-making which is the most important element in human cognitive action. Although the agent arrives at a designated office instead of human, it doesn't support a decision of whether raising the market price is appropriate or doing a counter-attack is smart. After we reviewed a current situation and problem in control & command of military, in order to collect a big data for making a machine staff's advice to be possible, we propose a data modeling prototype based on decision-making conditions as a method to change a current control & command system. In addition, a decision-making tree method is applied as an example of the decision making that the reformed control & command system equipped with the proposed data modeling will do. This paper can contribute in giving us an insight of how a future AI decision-making staff approaches to us.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.26-32
• /
• 2015

The consistency and homogeneity of repetitive printing of artificial fingerprint were evaluated using a visual minutiae comparison method and an Automated Fingerprint Identification System (AFIS). The standard latent fingerprint pattern was prepared by the printing of a master digital fingerprint pattern with an inkjet printer cartridge case filled with artificial sweat. The master digital fingerprint pattern was prepared with a scanning of an inked fingerprint pattern of a living subject. The intensities of the master digital fingerprint pattern were adjusted by changing the 'output level' values of the Adobe Photoshop CS 5 software. Number of standard latent fingerprint patterns were printed and then developed with conventional latent fingerprint developing methods; ninhydrin treatment method and 1,2-indandion(1,2-IND)/$ZnCl_2$ treatment method. The ridge details of the latent fingerprint patterns developed with the reagents were visually compared with the inked fingerprint pattern and could confirm that the minutiae of both patterns are visually identical. The ridge detail of the inked fingerprint and reagent developed standard latent fingerprint patterns were compared with an AFIS. The average number of minutiae searched by the AFIS was $52.4{\pm}2.4$ (range = 48~56) for 50 ninhydrin developed latent fingerprint patterns, and $50.2{\pm}1.9$ (range = 47~53) for 50 1,2-IND/$ZnCl_2$ developed latent fingerprint patterns. These low standard deviation values over 50 repetitive printing demonstrated that the 50 standard latent patterns were printed with consistent and homogeneous manner.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.171-178
• /
• 2018

The ocean is a harsh environment and Korea Coast Guard officers often face the threat of death or going missing in the line of duty. In order to promptly identify unknown bodies during mishaps, Korea Coast Guard Research Center has established an identification system using the DNA of its officers. This collected DNA can also be entombed in National Cemeteries when the remains are not recovered. The storage, disposal and quality control of the materials are overseen by the Governing Committee according to the Enforcement Rules for the Human Biological Materials Storage Project for the Identification of Officers Killed or Gone Missing in Action. Approximately 700 bodies are found per year along the Korean coast. An alternative method should be put in place for when identification through fingerprints and teeth are not applicable due to severe decomposition or partial recovery. We believe it would greatly contribute to helping identify the unknown bodies if the storage project could expand its data to include marine industry workers, relevant researchers and those involved in marine leisure activities.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.87-107
• /
• 2016

Understanding market convergence has became essential for small and mid-size enterprises. Identifying convergence items among heterogeneous markets could lead to product innovation and successful market introduction. Previous researches have two limitations. First, traditional researches focusing on patent databases are suitable for detecting technology convergence, however, they have failed to recognize market demands. Second, most researches concentrate on identifying the relationship between existing products or technology. This study presents a platform to identify the opportunity of market convergence by using product databases from a global B2B marketplace. We also attempt to identify convergence opportunity in different industries by applying Structural Hole theory. This paper shows the mechanisms for market convergence: attributes extraction of products and services using text mining and association analysis among attributes, and network analysis based on structural hole. In order to discover market demand, we analyzed 240,002 e-catalog from January 2013 to July 2016.