• Title/Summary/Keyword: 시설배치

Search Result 632, Processing Time 0.041 seconds

Layout Criteria of an Access Mode's on and off Facility at Multiple Transfer Centers (복합환승센터 접근교통수단의 승하차 시설배치기준)

  • Kim, Si-Gon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.32 no.2D
    • /
    • pp.95-101
    • /
    • 2012
  • Layout Criteria are developed for an access mode's on and off facility at multiple transfer centers in this paper. Layout Criteria are location issues between a main mode and access modes in terms of the on and off facility one another. The total distance between them has been suggested to be minimized. In the distance calculation stairs are considered to be more difficult and than open space. On the other hand an escalator and an elevator are treated as easier than open space. Considering the number of people between on and off facility, the weighted average distance is suggested to be a MOE(Measure of effectiveness) for layout criteria at multiple transfer centers. Finally, the layout criteria are applied to the existing Kimpo airport terminal and some improvement ideas are suggested.

Design consideration and explosion safety of underground ammunition storage facilities (지하탄약고의 설계요소 및 폭발안전 연구)

  • Kim, Oon-Young;Lee, Myung-Jae;Kim, Min-Seok;Kim, Joon-Youp;Joo, Hyo-Joon
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.5 no.1
    • /
    • pp.55-70
    • /
    • 2003
  • Ammunition magazine, which is installed on the ground, has difficulty in protecting from the external attack, and accidental explosion should cause great damage to the life and property. For these reasons, it is needed to develop underground magazine that it has the advantages of safety, security and maintenance. This paper introduce the design case for blasting facilities, which should resist blasting pressure, as well as layout of underground magazine, which takes a safety for explosion and a working space of loading/unloading machine into consideration. On the layout, in case of ${\bigcirc}{\bigcirc}$ underground magazine, put three storage chambers in position almost parallel with principle stress direction, where less effected on discontinuity and hard rock area. Also, secured safe distance according to safety criteria of the Defense Ministry, and verified suitable layout by trace simulation for loading/unloading machine on working stage. Blasting design was performed on evaluation of maximum blast pressure between donar and acceptor chambers, and design condition for blast door, valve, etc. Diminution facilities against explosion, such as thrust block or debris trap, determined its size after plan in accordance with blasting criteria and calculation by structural analysis.

  • PDF

A Study on the Optimum Locations of University Restaurant (대학시설의 최적배치계획에 관한 연구 - 대학식당을 중심으로 -)

  • Kim, Jong-Seok
    • Journal of the Korean Institute of Educational Facilities
    • /
    • v.5 no.2
    • /
    • pp.30-39
    • /
    • 1998
  • The paper analyses the optimum locations of university facilities. Pick up a student restaurant, and, using network model, do that examine the following thing with a purpose. 1) Do comparison examination with a current location and optimum location of restaurant. 2) Plan an location of existing restaurant again, and examine location of new restaurant. As a result, made clear what that did the total sum of distance with a minimum could utilize.

  • PDF

Automatic Fire Detector Spacing Calculation for Performance based Design (성능위주설계를 위한 화재감지기배치의 공학적연구)

  • Yoon, Myong-O;Park, Dong-Ha
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2010.10a
    • /
    • pp.180-189
    • /
    • 2010
  • 현재의 화재안전기준에서 규정하는 화재감지기의 배치방법은 면적에 따라 규정된 숫자를 적정하게 배치하는 수준이다. 이 기준은 과학적인 근거는 가지고 있지 못하다. 외국의 기준을 도입하여 그에 따라서 설치하고 있을 뿐이다. 소방시설을 설계하는 방법에는 화재안전기준과 같이 명문화 된 규정에 따르는 규범위주설계(Prescriptive-Based)와 화재역학, 구조역학, 재료역학, 유체역학, 열역학 등 공학적 지식을 바탕으로 하는 성능위주설계(Performance-Based Design)가 있다. 현재로서는 성능위주설계가 활성화 되지 않았지만, 최근 소방시설공사업법은 성능위주설계방법을 이용하여 소방시설을 설계 할 수 있도록 개정('05. 8. 4)되었으며 그 시행령('07, 1. 24)에서 성능위주설계를 적용할 특정소방 대상물의 범위를 정하고 있다. 이러한 시점에서 자동화재탐지설비의 화재감지기를 최적의 위치 및 거리에 설치하기 위하여 그에 대한 공식의 도입과 공식을 Software로 계산할 수 있도록 시뮬레이터를 제작하여 계산하고 규범위주설계에 따라 배치한 화재감지기의 상태와 비교 분석하며 향후 성능위주설계 방법으로서 정착시키기 위하여 연구를 시도하였다.

  • PDF

지상(紙上) 블로그 - 학교도서관, 책 읽기에 교과교사와의 협동수업을 더하다

  • So, Byeong-Mun
    • KLA journal
    • /
    • v.53 no.3
    • /
    • pp.24-27
    • /
    • 2012
  • 채 10년도 안되는 기간동안 학교도서관은 천국과 지옥을 오가고 있다. 2002년부터 교육인적자원부(현 교육과학기술부) 주도로 시작된 '학교도서관활성화사업'을 통해 낡은 학교도서관 시설은 현대식으로 바뀌었으며, 교원으로서 사서교사는 1998년부터 지속적으로 현장에 배치되었고, 2007년 "학교도서관진흥법"이 제정되면서 나름 학교도서관에 대한 구체적인 법적 관심을 받았다. 먼지 쌓이는 교실 한 칸도 되지 않던 창고같던 학교도서관은 늘어난 장서와 PC를 포함한 다양한 IT 기기, 편안하게 책을 읽을 수 있는 교구 등을 갖추면서 나름 도서관답게 바뀌기 시작했던 시기이다. 학교도서관 운영의 주체성과 자율성을 가질 수 있는, 많지는 않더라도 교사라는 지위로 사서교사가 전국의 초 중등학교에 지속적으로 배치되던 시기이기도 하다. 도서관 관련 법에서 늘 구석에 있던 학교도서관은 "학교도서관진흥법" 및 시행령이라는 단독법안으로 제정되어 법리 상 관심을 받던 시기였다. 여기에 더해 책 읽기에 대한 관심이 커지면서 학교도서관을 중심으로 다양한 책읽기 프로그램 등이 운영되고 나름 학교도서관이 활성화되는 것 같았다. 하지만 화려하게 바뀐 학교도서관은 자격이 있는 인적자원 배치와 지속적인 장서의 공급 등을 통해 유지되기보다는 운영시간 연장 등 시설 자체의 운영에 초점이 맞춰지는 시기로 바뀌었다. 98.6%에 이르는 학교도서관 설치 대비 46% 밖에 되지 않는 인적자원의 배치 현황, 그나마 학교도서관에 배치된 인적자원의 14.7%만이 정규직 사서교사, 사서(직원)이라는 현실은 안정적이고 지속적인 인적자원 배치에 대한 기대를 더 이상 할 수 없는 어려운 시기로 바뀌었음을 보여준다. 단독법안으로 학교도서관의 진흥과 활성화에 기여할 것으로 기대했던 "학교도서관진흥법"은 학교도서관 관련 시설, 인적자원, 운영에 대한 분명하고 명확하지 않은 법조항 때문에 관점에 따라 다양한 해석을 할 수 있어 오히려 학교도서관의 발전을 저해한다는 일부의 비판도 받았다.

  • PDF

An Application of the Experts' GDSS to Housing Facility Allocation Processes (전문가 집단 의사결정 지원체계 (Experts' GDSS)의 주구시설 배치 적용)

  • Chin, Yang-Kyo;Ahn, Jae-Young
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.4 no.2 s.8
    • /
    • pp.63-77
    • /
    • 1996
  • This study suggests that experts' group decision support system (Experts'GDSS) should be helpful to solve specific planning/design problems. Dealing with AHP (Analytic Hierarchical Process), as a group decision model, maximal covering model, as a facility allocation model, and GIS (Geographic Information System; ARC/INFO in this study), as a spatial representation model, this study seeks to examine the implication of GDSS (Group Decision Support System) in the housing facility allocation. The results of this study clearly demonstrated that experts' GDSS acted its positive role, systematically providing the relative weights among the planning variables and objectives. Among different expert groups (e.g., planners, scholars, and public administrators), this study showed that there were certain differences in their decision structures, which generated different solutions in facility allocation. The further study, however, remains to investigate the more systematic implementation of GDSS in planning problems; for example, reducing the conflicts between different groups with different purposes.

  • PDF

Facility Layout Planning for the Safety 7th Curriculum of Technology Laboratory in a Middle School (제7차 교육과정을 고려한 중학교(中學校) 기술실(技術室)의 안전.시설.설비(安全.施設.設備) 배치(配置) 계획(計劃))

  • Kim, Jong-Bok;Lee, Sang-Hyuk
    • Journal of the Korean Institute of Educational Facilities
    • /
    • v.10 no.3
    • /
    • pp.15-26
    • /
    • 2003
  • The purpose of this study is to describe the planning and applied safety facility layout for a technology laboratory in a middle school. A technological teaching facility has its essential purpose in meeting students' needs and achieving educational objectives efficiently and effectively. Practice-related appliances were selected through investigation of the current middle school laboratory, and analysis of the technology textbooks of the 7th curriculum. Laboratory layout was achieved with consideration of the teacher's and students need of safety and close proximity to laboratory facilities and equipment. Our recommendation takes the SLP survey results into consideration. The results of this study are as follows: The following floor plan is recommended. The facility layout will insure that students are able to work safely, in full view of academic instructors. Students will have easy access to all equipment due to the efficient floor plan and logical sequencing of equipment.