• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.69-74
• /
• 2012

Recent global supply chain, improving the efficiency of container shipping process is very important. In the overseas shipping of goods, the voyage of super containership is common to overcome amount of increasing cargo. Thus, container terminal managers make an experiment on the double cycle and dual cycle operation, which ship loading and unloading were carried out simultaneously, for maximizing the productivity of quay side. Yard Tractors(YTs) pooling methods also are introduced for increasing the efficiency of assignment of YTs. In this paper, we analyzed the efficiency of dual cycling through comparing existing pooling methods with the modified method for the dual cycling. We developed a simulation model using simulation analysis software, Arena. The result of experiment shown that the more dual cycling don't always increase the gross crane rate(GCR), which means productivity of quay cranes(QCs) per hour.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.592-601
• /
• 2004

The performance of active power filter depends on the inverter characteristic, the control method, and the accuracy of reference signal generator. The accuracy of reference signal generator is the most critical item to determine the performance of active power filter. This paper introduces a novel reference signal generator composed of improved adaptive predictive filter. The performance of proposed reference signal generator was verified by means of simulation with MATLAB. The application feasibility was evaluated by building and experimenting a single-phase active power filter based on the proposed reference generator, which was implemented in the DSP(digital signal processor) TMS320C31. Both simulation and experimental results confirm that the proposed reference signal generator can be utilized for the active power filter.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.55-72
• /
• 2017

Autonomous Vehicles(AV) are considered as an alternative to solve various social problems. Many researches which are related to developing technologies and AV operations have been conducted vastly and on-going. However, there seem to be little studies on various influences of AI algorithm on driving installed in AV. This study aims to examine the impacts of the ethical decisions made by Utilitarianism-based AI in AV when the oncoming car crossed over the central line. It establishes scenarios about situation of encroaching a central line and analyzes traffic impacts of ethical decision made by AV. According to the results of the analyses, as th accident occurs, overall speed of traffic decrease. There is a negative impact on the traffic flow when AV made an Utilitarian-based ethical decision by changing the lane. However, when AV choose to collide head-on, there is a positive effect to relieve traffic flow with an assistance of CACC, equipped.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.5
• /
• pp.32-40
• /
• 2010

Recent periodical boom and burst of house price have made mortgage lending issues become the main public interest in Korean real estate market. However, because mortgage-lending issues had not been discussed until then, housing market forecasting associated with mortgage lending has been difficult while using an empirical approach. Thus, comprehensive and systematic approach is required as well as validity of mortgage lending policies should be evaluated. In this regard, this research conducts a sensitivity analysis to validate the proposed policies and estimates the effects of current policies on LTV and DTI ratios with a comparison of another policies scenario. A causal loop and sensitivity analysis using system dynamics confirmed that LTV and DTI regulation is strong clout to housing market. However, to prevent transfer of potential mortgage borrowers to nonmonetary institutions, regulations in loans of nonmonetary institutions should be practiced in accompaniment with regulations of primary lending agencies.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.2
• /
• pp.262-274
• /
• 2013

Heavy rain and heavy snow as representative extreme weather are recently an issue in urban area. The paper aims at modeling the scenarios of evacuation that minimizes economic loss of the designated urban area with improving travel efficiency by providing road closure information facing an extremely heavy rainfall. The paper develops a model by using a NetLogo toolkit applied to the study area of Seocho-dong, Seocho-gu, Seoul. The model conducts a simulation of travel time under different scenarios of information provision. The simulation results show that it is efficient to provide the information of road closure to 20~40% of the drivers under the scenario of humid road or rainfall less than 20mm, whereas to 40~60% of the drivers under the scenario of heavy rainfall more than 20mm.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.313-336
• /
• 2007

Unlike a conventional railway system, a high-speed rail system experiences various aerodynamic problems in tunnel sections. Trains running at a high speed in a small tunnel, when compared with the open field, face significant air pressure, resulting in reduced operating stability and fast change in pressure inside the tunnel. These phenomena further cause some unexpected problems such as the passengers onboard feeling an aural discomfort and an impulsive noise at the tunnel exit. To solve these problems, this paper introduces analysis of aerodynamic characteristics for determination of tunnel cross section. The optimum cross-section that satisfies the criteria of aural discomfort was reviewed through lots of numerical simulation analysis. Also, the pressure inside the passenger car of a train operating on Kyungbu HSR line was measured, and the pressure inside the tunnel and the micro-pressure waves at tunnel exit were measured at Hwashin 5 Tunnel. At the same time, a test of train operation model was performed and then the measurement results and test results were compared to verify that various parameters used as input conditions for the numerical simulations were appropriate.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.23 no.3
• /
• pp.319-329
• /
• 2017

Purpose: This study evaluated the acquisition and retention effects on diabetes knowledge and academic self-efficacy of patient simulation-based hypoglycemia scenario using a high-fidelity simulator. Methods: A nonequivalent control group pretest/posttest repeated measures quasi-experimental design determined if nursing simulation using a high-fidelity simulator helps students acquire and retain diabetes knowledge and academic self-efficacy. A total of 101 nursing students from two universities participated in this study, comprising the experimental and control groups. The experimental group (n=52) at a university in S city comprised participants in an adult nursing class, nursing practicum, and simulation education. The control group (n=49) at a university in C city participated in an adult nursing class and nursing practicum without simulation education. Results: The experimental group had statistically significant group-time interaction effects on diabetes knowledge (p=.044) and self-confidence (p<.001) of academic self-efficacy compared to the control group. Conclusion: The results indicated that the patient simulation-based hypoglycemia scenario using a high-fidelity simulator applied to nursing education is useful in encouraging nursing students to engage in strategies with acquisition and retention effects, enhancing their diabetes knowledge and self-confidence of academic self-efficacy. Therefore, educators should use simulation programs effectively with nursing classes and practicum to enhance the effects of nursing competencies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1131-1142
• /
• 2013

This study aims to verify the applicability of TRANSIMS (TRansportion ANalysis SIMulation System) in interrupted traffic flow through calibration and validation process based on observation data; such as headway, traffic volume, speed, and travel time from Dalguberl Boulevard in Dae-gu metropolitan city. On this study, several micro-simulation parameters are derived from the calibration and validation process through performing a headway comparison and applying an ID back tracking methodology. As a result, it is figured out that actual circumstances of Korean roadway; for example, traffic volume per lane, speed, and travel time, can be applied on the TRANSIMS. Especially, it was possible to find out the influence of cell size parameter to traffic flow characteristic of simulation. However, it is hard to conclude that TRANSIMS is applicable to Korean roadway environment with studying particular target area. Therefore, additional studies; such as more case studies with various types of road, signal, and land use, will be required to localize TRANSIMS to Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5260-5266
• /
• 2015

To develop weapon system, Concurrent Spare Parts(CSP) is one of the important somethings in terms of Intergrated Logistics System(ILS). CSP is very important to improve the availability of weapon system, and various research about CSP are performed. However, most of the research does not consider the effects between sub-item's failure and weapon system's multiple function. In other words, if sub-item's failure does not seriously influence weapon system's specific function, the point, not necessarily to replace sub-item, is not considered. Therefore, the method to calculate CSP based on above consideration is written by failure-function matrix in this paper. The study follows the procedure below. First, it's to define the operation and maintenance procedure of weapon system. Second, failure-function matrix is developed. Third, simulation model is desinged by input data. Finally, The quantity of CSP is calculated by simulation and evolution strategy, meta-model. This study suggests new research direction to calculate CSP.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.451-459
• /
• 2010

This paper describes the performance comparison results for a hybrid back-to-back converter, which is composed of a 3-level 24-pulse converter and a 3-level PWM converter, in order to interconnect a large scale wind farm with the power grid. Also it describes the performance comparison results when the 24-pulse converter operates in only firing-angle control, and both firing-angle and the zero-voltage control. For the purpose of systematic performance comparison, computer simulations with PSCAD/EMTDC software were carried out, and based on simulation results a scaled hardware model with 2 kVA rating was built and tested.