• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.299-306
• /
• 2015

In construction materials area, many research on polymer for cement-based materials have been conducted. In spite of these research, general research scope is limited to the normal strength range, and thus in this research, for both normal and high strength range mixtures, the strength and mechanical properties of high strength cement mortar incorporating Vinyle Acetate-Ethylene(VAE) type powder polymer are evaluated. As a result of experiment, in the case of high strength mixture, as the amount of VAE polymer addition was increased the compressive and flexural strengths were decreased while the tensile and bonding strengths were increased because of the formation of the polymer membrane inside of the mortar matrix.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.92-99
• /
• 2021

CaO-based by-products composed of CaO, SO3, Al2O3, etc. are generally used as raw materials for CaO compounds. When applied to the recovered water of ready-mixed concrete, the hydration reaction of the powder material is accelerated and concrete performance can be improved. In this study, activated sludge was prepared to apply to the recovered water of ready-mixed concrete by mixing CaO-based hot-rolled slag(C12A7) in the recycling water of ready-m ixed concrete. Cem ent paste setting time and mortar compressive strength performance tests confirmed the effect on the hydration reaction. Therefore, the possibility of concrete application using activated sludge was confirmed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.15-22
• /
• 2022

In this study, the hydration reaction and strength characteristic of cement mortar with spent coffee ground(SCG) was investigated. As a result of the study, it was found that as the firing temperature of the SCG increased, the mass loss due to the combustion of organic matter increased, but the density increased. In addition, when the SCG were mixed, SCG interfered with the hydration reaction and the compressive strength was significantly lowered. On the other hand, the coffee grounds ash(SCG_Ash) calcined at 800 ℃ showed a hydration reaction and a compressive strength equivalent to or higher than that of OPC mortar.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.102-109
• /
• 2024

In order to use limestone powder as a material for concrete, the mechanical and durability characteristics of cement matrices manufactured by varying the substitution rate were evaluated. In general, limestone powder did not contribute to the cement hydration reaction, so as a result of the compressive strength test of cement mortar using it, the compressive strength decreased as the substitution rate increased. However, as a result of evaluating the durability performance of cement mortar using limestone powder, such as chloride ion penetration resistance, carbonation resistance, and chemical attack resistance, small particles of limestone powder showed superior results compared to the unsubstituted control mortar due to the micro-filler effect of filling the fine pores inside the cement matrix. Therefore, limestone powder is expected to be used as an effective method for improving the durability of concrete. In this study, the durability was evaluated by changing the mixing amount of limestone powder to 0 %, 5 %, 10 %, and 15 %, but it is judged that it is necessary to study in more detail the effect on the durability by changing the end and mixing amount of limestone powder to various levels in the future.

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.354-361
• /
• 2001

In this paper, three kinds of poly(acrylate-co-methylacrylate) with different number average molecular weight(Mn) were synthesized and studied for the effects on the mechanical properties and the fluidities of the cement mortar admixtured with them. The physical properties of the cement mortar are more favorably enhanced by the poly(acrylate-co-methylacrylate) of Mn,, 5,000 than that of Mn, 2,000∼3,000. And the optimum dosage was decided to ca. 0.6 % of cement weight in cement mortar. However, the dispersion abilities of the polymers in cement mortar was not kept long time. This last result could not be explained by the theory that the fluidity of the cement mortar added with the slow releasing polycarboxylates is kept by the releasing of the carboxylic group of the copolymer in alkaline solution of cement paste.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.124-134
• /
• 2013

This study investigated the effect of surface water on concrete substrate on adhesive strength in tension of very high flowable SBR-modified cement mortar. The specimens were prepared with proportionally mixing SBR latex, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Polymer cement ratio (P/C) were 10, 20, 30, 50 and 75% and the weight ratio of fine aggregate to cement were 1:1 and 1:3. The specimens obtained with different P/C and C:F were characterized by unit weight, flow test, crack resistance and adhesion test. After basic tests, two mixtures of P/C=20% and 30% in case of C:F=1:1, and one mixture of P/C=50% in case of C:F=1:3 were selected, respectively. These three selected specimens were studied about the effect of surface water evenly sprayed on concrete substrate by a amount of 0, 0.006, 0.012, 0.017, 0.024g per unit area ($cm^2$) of concrete substrate surface The results show that surface water on concrete substrate increases the adhesive strength in tension of high flowable SBR-modified cement mortar and improve the flowability compared to the non-sprayed case.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.204-210
• /
• 2022

Cement is pointed out as the main cause of carbon dioxide emission in the construction industry. Many researchs are underway to use blast furnace slag, an industrial by-product, as a substitute for cement to reduce carbon dioxide emitted during the manufacturing the cement. When blast furnace slag is used as a substitute for cement, it has advantages such as long-term strength and chemical resistance improvement. However, blast furnace slag has a problem that makes initial strength low. This is due to the impermeable film on the surface created during the production of blast furnace slag. The created film is known to be destroyed in an alkaline environment, and based on this, previous studies have suggested a solution using various alkali activators. But, alkali activator is dangerous product since it is a strong alkaline material. And it has the disadvantage in price competitiveness. In this study, an experiment was conducted to improve the initial hydration reactivity of the blast furnace slag to secure the initial strength of the mortar substituted with the blast furnace slag and to check whether the carbonation resistance was increased. As a result of the experiment, it was confirmed that the mortar using alkaline water showed higher strength than the mortar using tap water, and there were more hydration products generated inside. In addition, it was confirmed that the mortar using alkaline water as a compounding water had high carbonation resistance.

• Journal of the Society of Disaster Information
• /
• v.11 no.3
• /
• pp.329-336
• /
• 2015

When diatomite powder was used as an admixture in mortar, its effects on the mortar strength was examined by experimental tests. For the tests, 4 kinds of commercially available diatomite powder were purchased ; one non-calcined product, one calcined product, and flux-calcined product two. The compressive and flexural strength of the mortar according to the increase of added amount of calcined diatomite powder increased at all test ages(7, 28, and 56 days). However, the use of non-calcined diatomite powder worsened the fluidity of mortar severely and that caused much more required water content. And flux-calcined product did not show useful effect on the mortar strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.673-676
• /
• 2008

Color concrete utilizes peculiar texture and color sense in external appearance actively as a finish. But, this color concrete is essential use of pigment for required color revelation, and color cone cleat from mixing of this pigment are different existent achromatic color concrete and basic properties of matter. this study progressed slump test and setting time examination through mortar injection resistance examination of mortar that mix Pigment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2014

Steel fiber is a effective composite for crack resistance and improve structural performance under tensile loading. This study presents an evaluation of crack resistance and structural performance in cement mortar with steel fiber and expansion agent through internal chemical prestressing. For this work, cement mortar samples with 10% replacement of cement binder with CSA (Calcium-Sulfo-Aluminate) expansion agent and 1% volume ratio of steel fiber are prepared. Including basic mechanical properties, initial cracking load and fracture energy are evaluated in cement mortar beam with notch. Initial cracking load and fracture energy in cement mortar with CSA and steel fiber increase by 1.75 and 1.41~1.53 times compared with those in cement mortar with steel fiber. With optimum mix design for steel fiber and CSA expansive agent, the composite with chemical prestressing can be applied to various members and effectively improve crack resistance to external loading.