• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.962-964
• /
• 1987

In this paper a virtual route pacing control mechanism is introduced to the flow control of M-hop virtual route in the packet data network. The results described in this paper show us a comparison of the relationship between the throughput and the time-delay with the variation of the parameter, the normalized applied load. for the fixed window size.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.243-246
• /
• 1998

A predictive controller is designed based upon stochastic methods for compensation of network time delay which caused by the spatial separation between controllers and actuators. Current commands are generated by using time varying probability functions which can be defined according to the values of previous control inputs and actual outputs. To demonstrate the effect of this control methodology, simulation experiments are performed. The results show that even an unstabilized system by a long time delay can be stabilized with this predictive controller.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05d
• /
• pp.752-757
• /
• 2002

IP 멀티캐스트는 다자간 통신을 위한 효과적인 방법이지만 신뢰성 보장과 FTP나 Telnet등 TCP제공하는 다양한 전송프로토콜을 지원하지 않는다. 본 논문에서는 멀티캐스트의 UDP와 TCP계층의 전송 프로토콜을 동시에 사용할 수 있는 신뢰성 있는 멀티캐스트 서버라우터를 제안한다. 신뢰성 있는 멀티캐스트가 반드시 고려해야 할 확장성과 오류회복, 흐름제어를 위해, 그룹의 확장성과 오류회복에 적합한 기존의 SRM방식을 이용하였다. SRM방식은 신뢰성 있는 다-대-다 멀티캐스트 패킷을 전달한다. 각 참여자는 동시에 수신자와 송신자 역할을 할 수 있다. 모든 그룹 멤버는 낮은 주파수의 세션 메시지를 교환하고 그룹내의 주변 가입자에 대한 정보를 얻게 되며 패킷 손실 판단에 필요한 지연시간을 측정하고 복구하는 방식이다. UDP의 트래픽 기반은 멀티캐스트에 적합한 CBR과 SRM을 사용하였다. 본 연구에서는 멀티캐스트의 UDP 패킷과 TCP 패킷을 동시에 보낸 수신율과 멀티캐스트의 UDP만 보낸 수신율을 지연이 가장 큰 멀티캐스트 수신자측에서 패킷 번호와 수신율을 측정하고, 시뮬레이션을 통해서 검증을 통하여 기존의 멀티캐스트 전송방법과 비교하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.175-181
• /
• 2005

This paper proposes the fuzzy-PLL control system for fast response time and precision control of automation systems. The conventional PLL has not only a jitter noise caused from such a demerit of the wide dead zone, but also a long delay interval that makes a high speed operation unable. In order to solve the problems, the proposed system, which provides the improvement in terms of the control region in high speed and precision control, first used the fuzzy control method for fast response time and when the error reaches the preset value, used the PLL method designing new PFD for precision control. The new designed multi-PFD improves the dead zone, jitter noise and response characteristics, which is consists of P-PFD(Positive edge triggered PFD) and N-PFD(Negative edge triggered PFD) and can improve response characteristics to increase PFD gain.

• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.668-676
• /
• 1992

For the purpose of optimizing poly-l3-hydroxybutyrate (PHB) production from Alcaligenes eutrophus, two-stage fed-batch culture was adopted. In this system, specifk growth rate was maximized during the first stage whereas specific production rate was maximized during the second stage. The optimal concentrations of glucose and ammonium chloride were 16.6 and 0.54 g/I in the growth stage and 20.0 and 0.07 g/l in the production stage, respectively. Proportional feedback control considering time lag was suggested for PHB production process and a simulator was developed for real-time control purpose.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.373-382
• /
• 2009

we present more efficient method of a medium access for real-time ubiquitous sensor networks. Proposed MAC protocol is like the randomized CSMA/CA protocol, but unlike previous legacy protocols, it does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports from sensor nodes, we carefully decide to select a fixed-size contention window with non-uniform probability distribution of transmitting in each slot. We show that the proposed method can offer up to several times latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using a widely-used network simulation package, NS-2. We finally show that proposed MAC scheme comes close to meet bounds on the best latency being achieved by a decentralized CSMA-based MAC protocol for real-time ubiquitous sensor networks which is sensitive to latency.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.29-37
• /
• 2004

This paper provides a reliable H$_{\infty}$ state feedback controller design method for delayed singular systems with actuator failures occurred within the prescribed subset. The sufficient condition for the existence of a reliable H$_{\infty}$ controller and the controller design method are presented by linear matrix inequality(LMI), singular value decomposition, Schur complements, and changes of variables. The proposed controller guarantees not only asymptotic stability but also H$_{\infty}$ norm bound in spite of existence of actuator failures. Since the obtained sufficient condition can be expressed as an LMI fen all variables can be calculated simultaneously. Moreover, the controller design method can be extended to the problem of robust reliable H$_{\infty}$ controller design method for singular systems with parameter uncertainties, time-varying delay, and actuator failures. A numerical example is given to illustrate the validity of the result.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.442-449
• /
• 2003

This paper discusses how to generate the reference compensation voltages in Dynamic Voltage Restorers (DVR) by use of PQR instantaneous power theory. Sensed three-phase terminal voltages are transformed to PQR coordinates without time delay. Since the reference voltage in PQR coordinates is a single dc value, the voltage controller for DVRs is simple and easy to design. Proposed control method can be implemented by feedforward controllers or by feedback controllers. This paper verified the theory by a feedforward controller of a DVR with simulation and experiment.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1986-1987
• /
• 2007

본 논문에서는 PSIM 모델을 이용하여 오프라인 전류모드 제어 플라이백 변환기의 동특성 해석과 제어기 설계방법을 제시하였다. 제시된 PSIM 모델은 시간영역 모델을 이용하기 때문에 구조가 간단하여 이용하기가 쉬우며 정확성이 높다는 장점이 있다. 그리고 $110V{\sim}220V$ 오프라인 전원을 입력하여 10V/5A의 출력을 가지는 50W 플라이백 변환기를 설계 제작하여 실험을 통해 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.274-282
• /
• 2013

In this paper, a linear motor stroke controller using a phase lag filter and a single phase PWM inverter with a current controller has been implemented. In order to control the cooling capability of a refrigerator or an air conditioner in which linear compressors are applied, the piston speed should be controlled. The piston speed control can be obtained by adjusting the frequency or the stroke of linear motors. Generally, the frequency is fixed, for example, as 60Hz and the stroke is adjusted. The dynamic performance of linear compressors depends on how accurately the stroke or the piston position is controlled by the current applied. A linear motor piston position controller with a current control loop is proposed and verified via some simulation studies.