• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.117-123
• /
• 2019

The general Impulse Sealer has a problem of sealing quality because continuously sealing process results in an undesirable temperature rise, which may accumulate the heat during the operation. In order to address such a drawback, the controlled sealing temperature method can be effectively utilized compared with the general controlled time method. As such, a temperature sensor with capability of detecting the sealing temperature was installed, and a separate PCB was manufactured to control the sealing temperature by measuring and calculating the detected temperature. The temperature changes during the temperature rise and maximum temperature after continuously operation were investigated using an Impulse Sealer system. Next, the results obtained from experiment were compared with each other. As such, the maximum temperature was 70.3℃, whereas 8.9℃ was recorded as control temperature. It implies that this controlled temperature system prevented the undesirable temperature rise, thereby causing a consistent sealing quality.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.29-36
• /
• 2013

This study is the fundamental research to establish evacuation planning and to analyze evacuation planning characteristics in Gumi-city based on existing network and traffic characteristics data. Assuming an emergency situation, it compared with evacuation time estimates between using existing traffic signal system and proposed lane-based routing method through micro simulations. As a result, using existing traffic signal system could not affect the evacuation times in each level of emergency conditions. However this study found that proposed lane-based routing method is very effective to reduce an evacuation time compared with using existing traffic signal system. Also the proposed method is verified to reduce an evacuation time especially in extreme emergency circumstances.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.14 no.6
• /
• pp.75-86
• /
• 2018

The DDS (Data Distribution Service) specification defines a discovery method for finding participants and endpoints in a DDS network. The standard discovery mechanism uses the multicast protocol and finds all the endpoints in the network. Because of using multicasting, discovery may fail in a network with different segments. Other problems include that memory space wastes due to storing information of all the endpoints. The Topic Name Service (TNS) solves these problems by unicasting only the endpoints, which are required for communication. However, an extra delay time is inevitable in components of TNS, i.e, a front-end server, topic name servers, and a terminal server. In this paper, we analyze the performance of TNS. Delay times in the servers of TNS and time required to receive endpoint information are measured. Time to finish discovery and number of receiving endpoints compare with the standard discovery method.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.373-378
• /
• 2014

The technology of direction finding is very important to make high position fixing accuracy. TDOA(time difference of arrival) direction finding technology is a high accuracy technology and is used in RF system from 1990. The principle of TDOA is to receive an emitter signal with two antennas, measure the time difference of received signal and then convert the time differences to azimuth angle. For high DF(direction finding) accuracy long basis line and high SNR at receiving system are needed. The DF accuracy and position fixing accuracy are simulated with different SNRs and antenna base lines. We obtain the DF accuracy of $0.51^{\circ}$ at $0^{\circ}$ incident azimuth angle in case of 50m base line and 40dB SNR.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.475-478
• /
• 2002

Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.344-344
• /
• 2011

진공인터럽터는 진공차단기에서 실제 사고전류차단시 발생하는 아크소호 및 차단을 담당하는 매우 중요한 부분이다. 일반적으로 교류차단기는 일시적으로 에너지가 공급되지 않는 전류 영점에서 아크소호 및 전류차단이 이루어진다. 일반적으로 아크가 발생하는 전극분리시점에서 아크가 소호되는 전류영점까지의 시간을 아크지속시간(arcing time)이라고 한다. 일단 진공 인터럽터 내부의 접점이 분리됨과 동시에 아크가 발생하게되면 이때 진공인터럽터는 아크지속시간동안 고온의 아크에 의한 접점손상을 최소화하기 위해 아크의 거동을 적절히 제어하여 아크에너지를 접점표면상에 골고루 분산시켜야 한다. 현재 진공인터럽터에 사용되는 아크제어 방식에는 크게 횡자계 방식과 축자계 방식이 있다. 본 논문에서는 횡자계 방식 중 spiral type 접점을 사용하여 25 kA의 전류차단시험을 진행하면서 아크전압을 취득하는 동시에 아크이미지를 촬영하여 아크지속시간동안의 아크의 거동을 분석하였는데 특히 본 실험에서는 전체 아크지속시간동안의 아크상태천이과정이 가장 잘 관찰되는 비교적 긴 아크지속시간을 설정하여 실험을 진행하였으며 이때 접점손상이 아크거동 및 차단성능에 미치는 영향을 중점적으로 다루었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.723-730
• /
• 2006

Recently, The flexible moving block system in train operation has been introduced to the worldwide rail transportation markets. This paper is a comparative study of the conventional fixed block systems effects and the flexible moving block system on train operating time saving. Based on the literature review, the new algorithm is developed. It is to calculate the optimum headway time of the train. The proposed algorithm can overcome some of the existing algorithm problems, such as the limits of the data and unaware of the rail characteristic. The total travel time saving effect has been analyzed by applying the skip stop scheduling system to the each block system. The results of this study indicated that the total travel time is approximately 40% decreased and the schedule velocity is approximately 24% improved when the moving block system is applied. The results of this study could be used as a theoretical basis for the selection of rail signal system in Seoul's subway number 2 line.

• Survey Research
• /
• v.10 no.2
• /
• pp.1-21
• /
• 2009

The purpose of this study is to compare the estimates of housework time by gender using two representative methods of time use study: Time Diary and Stylized Survey Questionnaire. Our analysis is based on the data from the Lifetime Use Survey(2004), which used time-diary questions, and the Korean Labor & Income Panel Study(KLIPS 2004), which used stylized questions on housework hours. The results show that men over-report their housework time in the stylized time use questions. In contrast, women under-report their housework time, which is unusual in the previous studies on response errors and reporting gap. Subgroup analysis shows that widowed/divorced men tend to over-report their contribution to housework more than other groups whereas among women, groups burdened with employed work, caring and housework underestimate their housework time. This reporting gap is explained by gendered norm and perception of time pressure. The theory to explain under-reporting of the housework time has been undeveloped in the previous studies. Our study suggests that perceptions of time pressure be an important factor to explain women's reporting gap of housework estimates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.660-668
• /
• 1994

In this paper, a new approach to estimate nonmlinear distortions (second-harmonic, second-intermodulation, third-harmonic, and third-intermodulation) in digital communication systems is proposed. In contrast to the relatively common sine-wave input approach which requires repetition of the same experiments by changing frequencies of oscillators and filters over the band of frequencies of interest, the proposed approach uses digital random input (transmitted signal in digital communication system) to adaptively estimate parameters of a nonlinear channel in time-domain. Nonlinear distortion of the channel is estimated on line by transforming the estimated parameters into frequency-domain. Comparison between the classical two-tone input approach and the proposed approach is made through computer simulation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.459-460
• /
• 2024

본 연구에서는 노이즈가 있는 신호에서 코릴레이션과 위상자를 이용해 특정 주파수 성분의 세기와 위상을 검출하고 시간 지연이 있는 두 개의 신호에서 위상차를 통해 시간 지연을 추정하는 알고리즘을 제시하였으며 마이크로폰 어레이와 증폭 회로를 구성하여 단일 주파수 음원의 시간 지연 추정을 구현하였다. 이는 단일 주파수 신호의 시간 지연을 검출하는데 있어 기존의 방식들에 비해 단순하며 보다 자원이 한정적인 임베디드 시스템에서 사용될 수 있을 것으로 예상된다.