• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.80-80
• /
• 2018

겨울철 대설 현상에 따른 도로 결빙과 항공기 운항 지연, 비닐하우스 및 가건물 붕괴와 같은 피해가 증가함에 따라 대처방안을 마련하는 일이 중요시 되고 있다. 이를 위해 정확한 적설 정보가 근본적으로 필요하지만, 문제는 적설량을 정량적으로 관측하는 일이 간단하지 않다는 점이다. 최근에는 무게식 우량계를 이용한 적설 관측이 수행되고 있지만, 강설량이 많을 경우 우량계가 눈에 덮이는 캐핑(capping) 현상으로 인해 제대로 관측하기 어려운 문제가 있다. 본 연구에서는 무게식 우량계의 이러한 한계를 보완하고 자료의 활용성을 높이기 위해 광학우적계(Parsivel)로 관측된 강설입자정보를 이용하여 적설량을 보정하는 방법을 제안하였다. 무게식 우량계 자료는 대관령 구름물리선도센터에 설치되어 있는 플루비오(Pluvio)의 적설 관측 자료를 이용하였다. 먼저, 관측된 플루비오 자료에서 단위 시간동안의 신적설을 산정한 후 과도한 관측값과 같은 노이즈를 제거하였다. 또한 플루비오와 동일 기간에 관측된 광학우적계 자료에 대해 강설 입자가 $10/m^3$ 초과로 나타나는 사상을 강수 기간으로 결정하고 두 자료가 모두 '0'인 경우 무강수로 나타냈다. 그 결과 강수 입자가 관측된 적설 기간에 플루비오가 우수하게 강설 사상을 관측하고 있음을 확인하였고, 부적합한 자료를 보정할 수 있었다. 이러한 방법으로 적설 자료를 개선할 경우 향후 레이더를 이용한 공간적 강설 추정의 정확도를 크게 개선할 수 있을 것으로 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.8
• /
• pp.426-431
• /
• 2007

In this paper we have studied the underwater vector channel modeling for MIMO(Multiple Input Multiple Output) to increase the performance and efficiency for ultrasound communication in underwater channel environments. Also we have analyzed the MIMO techniques using the proposed channel modeling. For underwater MIMO channel modeling. experiments were done in real channel environments and the data were analyzed to estimate parameters such as fading, Doppler, time delay, angle of arrival, and receiving power. These were used for modeling of underwater vector channel modeling for MIMO. Additionally, we have analyzed the performance of MIMO systems using our proposed channel models. As a result we could see that the BER has decreased severely with the same SNR when using the MIMO system.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.342-349
• /
• 2008

Multipath makes clear message transfer difficult in the underwater communication. To solve this problem, we propose a new method producing proper MFSP (Modulation Frequency Shift Period) which could be obtained by calculating time delay caused by different path from a transmitter to a receiver. At the transmitter end, messages were divided according to the size of the MFSP and transmitted accordingly alternating Frequency. At the receiver end, the received messages were demodulated in order to recover the original message by the adaptive BISMO algorithm which is constructed at the algorithm design stage. Adaptive MFSP and estimated BER (Bit Error Rate) were calculated through simulation test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.179-189
• /
• 2008

The object of this study is to develope a program with proposed numerical techniques for an optimal seismic control of structures using active tendon systems. Ricatti closed-loop algorithm has been applied to control the active tendon systems with time-delay problem. The optimal control is formulated as an optimization problem which is finding optimal weighting matrices by minimizing the quadratic performance index by SUMT. In order to find the optimal location of active tendons in structures, controllability index has been introduced. From numerical examples, the current optimal control technique with optimal location of tendons was suitable to control the seismic response of structures.

• The Journal of the Korea Contents Association
• /
• v.8 no.12
• /
• pp.236-245
• /
• 2008

The cancer patient who leads Bone scan and the PET study from in the nuclear medical study what is enforced with the link of early detection and the time which spreads, it will be able to accomplish a positive treatment with the data which presumes that time it researches a degree as cancer discovery initially and only difference of final period the bay it knows. The patient who receives a cancer decision it will be able to accomplish the necessary defense it will be able to delay the time in order, the maximum control the possibility of doing will be becomes the judgement. Cancer decision to initially the nuclear study and treatment it will be in parallel with effort and the investment which are constant and the schedule hour will elapse and to after difficulty some the case which comes to be negligent will be frequent and it will appear with him there to be a possibility of knowing, it will be caused by and the transfer of the cancer sell will be activity. It has a treatment objective and are to each medical treatment agency against and the medical treatment agency worker it will be able to overlook is not the portion is the private plan which needs a more positive disposal, it does.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.12-22
• /
• 2010

The variable message sign(VMS) is a facility to smoothen traffic flows and enable safe passing by providing real-time necessary information on roads, weather, transportation, and traffic regulations. The VMS also solves a feeling of uneasiness and gives a sense of psychological security by providing information to drivers. However, the VMS has a strong character of being a non-market product but a public product, so it has not normally been evaluated for its value. This research has evaluated a value of satisfaction level for traffic information users, using a contingent valuation method(CVM). As a result of evaluating the value of satisfaction level for users through division into an urban roadway and an urban highway for the cities where an intelligent transportation system(ITS) has been established, the urban highway had a value of 96.7 won/system and the urban roadway had a value of 76.3 won/system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.355-362
• /
• 2009

Sound source localization method based on the time delay of arrival(TDOA) is applied to many research fields such as a robot auditory system, teleconferencing and so on. When multi-microphones are utilized to localize the source in 3 dimensional space, the conventional localization methods based on TDOA decide the actual source position using the TDOAs from all microphone arrays and the detection measure, which represents the errors between the actual source position and the estimated ones. Performance of these methods usually depends on the number of microphones because it determines the resolution of an estimated position. In this paper, we proposed the localization method using spatially mapped GCC functions. The proposed method does not use just TDOA for localization such as previous ones but it uses spatially mapped GCC functions which is the cross correlation function mapped by an appropriate mapping function over the spatial coordinate. A number of the spatially mapped GCC functions are summed to a single function over the global coordinate and then the actual source position is determined based on the summed GCC function. Performance of the proposed method for the noise effect and estimation resolution is verified with the real environmental experiment. The mean value of estimation error of the proposed method is much smaller than the one based on the conventional ones and the percentage of correct estimation is improved by 30% when the error bound is ${\pm}20^{\circ}$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.69-74
• /
• 2016

A technique for improving estimation accuracy is introduced in order to locate the impact position of artillery shell during the weapon scoring test. Study on localization of impacts using acoustic measurement has been conducted and the usability of sensor array is verified with experiments. When the blast occurs above the ground in the firing range, the acoustic sensor above the ground can measure the directly propagated sound with the ground-reflected one. In this study, a method for reducing estimation error by using the reflection signal measurements based on the time difference of arrival method. Considering the reflection sound works as same as placing a virtual sensor symmetrically through the ground. This idea enables a virtual three-dimensional array configuration with a two-dimensional plane array above the ground as such. The time difference between the direct and the reflected propagations can be estimated using cepstrum analysis. Performance test has been made in the simulation experiment in the football size area.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.89-96
• /
• 2016

TDOA(time delay of arrival) position estimate from acoustic measurement of artillery shell impact is studied in order to develop a targeting evaluation system. Impact position is calculated from the intersections of hyperbolic estimates based on the least square Taylor series method. The mathematical process of Taylor series estimation is known to be robust. However, the concern lays with the accuracy because it is sensitive to the bias caused by the randomness of measurement situation. The measurement error typically occurs from the distortion of waveform, change of travelling path, and sensor position error. For outdoor measurement, a consideration should be made on the atmospheric condition such as temperature and wind which can possibly change the trajectories of rays of sound. It produces wrong propagation time events accordingly. Ray tracing and optimization techniques are introduced in this study to minimize the bias induced by the ray of sound. The numerical simulation shows that the atmospheric correction improves the estimation accuracy.

• Journal of Labour Economics
• /
• v.25 no.2
• /
• pp.1-32
• /
• 2002

This paper investigates how real wages adjust to regional and cyclical shocks in the Korean labor market. Major findings are as follows. First, like most longitudinal studies in this literature, we find that real wages are strongly procyclical and more procyclical for men than for women. Second, consistent with the theory prediction of efficiency wages, both permanent and transitory components of real wages are negatively correlated with the local unemployment rate. Third, when overall and local unemployment rates compete in a wage equation (our preferred specification), current wages are dominantly affected by the overall rate, and the effect of the local rate is rather small. This rejects the Blanchflower and Oswald's hypothesis that wages are primarily determined by local labor market conditions. Finally, no lagged effects on wages are detected in the overall or local unemployment rate.