• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.42-47
• /
• 2007

In this paper, influence of lossy ground and gap variation between lossy ground and UWB antenna on impulse propagation in time domain for impulse ground penetrating radar (GPR) is numerically and experimentally investigated. For this study, a novel planar UWB fat dipole antenna is developed. First, influence of lossy ground and gap variation between lossy ground and UWB antenna is simulated. For verification, a test field of sand and wet clay soil is built and using the developed dipole antenna, transmission behavior is investigated at the test field. With an aid of IDFT (inverse discrete Fourier transform), time domain impulse response for transmission coefficient measured and simulated in frequency domain is obtained. Measurement and simulation show that the frequency of maximum transmission coefficient and transmission coefficient are increased with higher dielectric constant and larger gap distance. In time domain, it is shown that for higher dielectric constant, the amplitude of the received signal in time domain is higher and reflected signals are seriously modified. Also, it is found that variation of gap between antenna and ground surface makes timing of peak value changed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.336-343
• /
• 2007

Due to the ultrawide band property of an UWB pulse, it is difficult to digitally implement a TR-UWB system in time domain. In order to overcome this problem, we propose two types of TR-UWB systems which can be implemented in frequency-domain. One of thorn is derived from the Parseval's theorem, which results in its system performance equitable to that of time-domain based system. In addition, we propose another receiver structure which can improve the performance by exploiting the complex nature of the frequency components. Finally, through simulations, we compare the performances of two receiver structures with the time domain counterpart.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.146-148
• /
• 1999

본 논문에서는 실시간 시스템에서의 상호배제를 제한된 시간안에 해결하기 위한 방안을 제안한다. Sanders 알고리즘을 이용해서 임계영역을 사용하기 위해 필요한 메시지의 수가 노드마다 서로 다를 수 있는 점을 이용한다. 즉, 서로 다른 데드라인을 가진 노드들이 임계 영역을 효과적으로 사용하기 위해서 데드라인이 상대적으로 가까운 노드가 임계영역 사용을 위해서 전송하는 메시지의 수를 적게 갖는 구조를 취함으로 전체적인 데드라인 miss 횟수를 줄이게 된다. 시뮬레이션을 통해서 이것의 성능 향상을 보인다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.37-40
• /
• 2001

본 논문에서는 수렴속도 향상을 위해 시간영역의 적응알고리즘을 직교변환인 아다말(Hadamard)변환을 이용하여 적응알고리즘을 변환영역에서 수행하며, 변환영역에서 수렴성능 향상을 위해 가변스텝 사이즈를 갖는 적응알고리즘을 제안한다. 제안한 알고리즘을 일반적인 부엽제거기(Generalized Sidelobe Canceller GSC)에 적용하여 컴퓨터 시뮬레이션을 하였으며, 각 알고리즘들의 계산량, 수렴 성능을 이용하여 각각 비교, 분석하여 제안한 알고리즘의 성능이 우수함을 입증하였다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.66-74
• /
• 1999

InAlGaAs/InGaAs HBTs with the various emitter junction gradings(xf=0.0-1.0) and the modified collector structures (collector- I;n-p-n, collector-II;i-p-n) are simulated and analyzed by HMC (Hybrid Monte Carlo) method in order to find an optimum structure for the shortest transit time. A minimum base transit time($ au$b) of 0.21ps was obtainsed for HBT with the grading layer, which is parabolically graded from $x_f$=1.0 and xf=0.5 at the emitter-base interface. The minimum collector transit time($\tau$c) of 0.31ps was found when the collector was modified by inserting p-p-n layers, because p layer makes it possible to relax the electric field in the i-type collector layer, confining the electrons in the $\Gamma$-valley during transporting across the collector. Thus InAlGaAs/InGaAs HBT in combination with the emitter grading($x_f$=0.5) and the modified collector-III showed the transit times of 0.87 psec and the cut-off frequency (f$\tau$) of 183 GHz.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.577-583
• /
• 2022

Verilog-HDL-based modeling can be performed to confirm the fast operation characteristics after setting the design parameters of each block considering the stability of the system by performing linear phase-domain modeling on the phase-locked loop. This paper proposed Verilog-HDL modeling including DCO noise and DTC nonlinear characteristic. After completing the modeling, the time-domain transient simulation can be performed to check the feasibility and the functionality of the proposed PLL system, then the phase noise result from the system design based on the functional model can be verified comparing with the ideal phase noise graph. As a result of the comparison of simulation time (6 us), the Verilog-HDL-based modeling method (1.43 second) showed 484 times faster than the analog transistor level design (692 second) implemented by TSMC 0.18-㎛.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.1-9
• /
• 1985

Two methods for the dynamic analysis of fixed offshore structures subjected to random waves are studied. They are the frequency domain method using the equivalent linearization of the nonlinear drag force, and the time domain method utilizing the Monte Carlo simulation technique for time series of random wave particle velocities and accelerations. Example analyses are carried out for two structures with different structural characteristics and for various wave conditions. A comparison has been made between the results obtained by two methods.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.109-115
• /
• 2006

In this paper, we design and performance evaluate the equalizer for S-DMT table modem, which supports more channels and better quality symmetric mutimedia services over HFC network. We verified that both of the designed equalizers show good convergence characteristics and that the performance of the time domain equalizer is 1 dB better than that of the frequency domain equalizer overall range of Eb/No.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.572-578
• /
• 2017

Haptic systems help users feel a realistic sensation when they manipulate virtual objects in the remote virtual environment. However, there are communication time delays that may make the haptic system unstable. This paper shows the relationship between communication time delay, properties of a haptic device, and the stability of the haptic system with the first-order hold method in a simulation. The maximum available stiffness of a virtual spring with the first-order hold method is larger than in the zero-order hold method when there is no time delay. However, when the communication time delay is much larger than the sampling time, the maximum available stiffness to guarantee the stability becomes the same, irrespective of the sample-hold methods. Besides, the maximum available stiffness increases in inverse proportion to the communication time delay and in proportional to the damping coefficient of the haptic device.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.11-12
• /
• 2015

본 논문은 LCL 필터를 사용하는 계통연계형 인버터의 안정적인 전류제어를 위한 공진주파수와 샘플링주파수의 관계 분석을 통해 주파수 및 이산시간영역에서 전류제어 안정도를 해석, 시뮬레이션 및 실험을 통해 검증하였다. 능동댐핑을 포함하지 않는 계통전류 제어의 경우, 공진주파수가 샘플링주파수의 1/6이 되는 $f_{base}$보다 높은 영역에 위치하면 안정, 낮은 영역에 위치하면 불안정한 특성을 분석하였고, 공진주파수 변화에 따른 전류제어루프의 안정도 해석을 기반으로 7kW 계통연계형 인버터 Psim 시뮬레이션 및 실험을 통해 동일한 결과를 도출함으로써 주파수간의 관계 분석 및 안정도 해석의 타당성을 검증하였다.