• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.5
• /
• pp.60-68
• /
• 1993

본 연구에서는 Colby 등이 제안한 PWM 인버터의 등가회로를 이용하여 PWM 인버터의 스위칭 지연시간이 유도전동기 구동시스템의 불안정현상에 미치는 영향을 다루었다.Colby 등이 제안한 등가회로는 유도전동기 구동시스템의 불안정현상의 해석에 매우 효과적이었으며, PWM 인버터의 스위칭 지연시간은 유도전동기 구동시스템의 1차측 저항의 증가에 영향을 미치게 되지만 유도전동기의 안정운전이 이루어지는 주파수영역에서는 스위칭 지연시간의 대소가 유도전동기의 안정운전에 큰 영향을 미치지 못함을 컴퓨터 시뮬레이션을 통하여 알 수 있다.

• KIISE Transactions on Computing Practices
• /
• v.20 no.10
• /
• pp.534-542
• /
• 2014

Multiscale modeling is a new simulation approach which can manage different spatial and temporal scales of system. In this study, as part of multiscale modeling research, we propose the way of combining two different simulation methods, molecular dynamics(MD) and stochastic rotation dynamics(SRD). Our conceptual implementations are based on LAMMPS, one of the well-known molecular dynamics programs. Our prototype of multiscale modeling follows the form of the third party implementation of LAMMPS. It added MD to SRD in order to simulate the boundary area of the simulation box. Because it is important to guarantee the seamless simulation, we also designed the overlap zones and communication zones. The preliminary experimental results showed that our proposed scheme is properly worked out and the execution time is also reduced.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.411-420
• /
• 2000

The performance of soft handoffs of CDMA mobile communication systems is potentially determined by several factors such as handoff-related system parameters (T_ADD, T_DROP, T_COMP, T_TDROP), mobile stations' mobility, service areas, capacity of base stations. Due to the importance of handoffs in mobile communications, several methods have been proposed and tested through computer simulations to prove the efficiency of proposed methods. Different assumptions on the above mentioned factors often produce different simulation results. Therefore, the credibility of a simulation result is directly determined by the objectivity of the assumptions made by the simulation. This paper proposes a new soft handoff method that controls handoff delay time based on a mobile station's speed, and compares it with the current method of CDMA systems. The simulation results showed that the new method is much more efficient for mobile stations that are free in their moving direction and space than for those restricted in their moving direction and space. In addition, the results showed that even the same handoff method may produces different simulation results depending on whether a service area is modeled as two-dimensional space or three-dimensional space. These results indicate the importance of suitable models of user mobility, especially the movement types and space allowed for mobile stations, which have been neglected in simulation studies of mobile communications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.59-66
• /
• 2003

We propose the novel optical burst switching scheme to guarantee a minimum bandwidth for multiple classes. To date, QoS studies on OBS network are capable of differentiating two classes, but have difficulties in providing a minimum bandwidth lot several classes because of lower classes' collision with the highest class bursts in the networks. To solve that problem, in our proposed scheme we assign time zones in a data channel for each class periodically, making one burst have top priority at least its zone. Also, the new burst assembling algorithm, as well as the way of managing data channel, is necessarily proposed to coordinate with the proposed OBS scheme. Through the evaluation, we show that the worst-case end-to-end delay is small enough and the received bandwidth of the lower classes is still assured regardless of the traffic load of the highest class.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1880-1881
• /
• 2007

전력선 통신 채널에는 특징적으로 충격 잡음이 존재하며, 전력선 통신 시스템의 성능 열화에도 많은 영향을 준다. 이는 일반적인 배경 잡음에 비해 많게는 수십 dB 이상의 레벨을 가지면서, 임의 시간적으로 발생함으로써 추정 및 제어 또한 어렵기 때문이며, 전력선 통신 시스템이 Mbps급으로 고속화 되면서 주파수 대역이 확장되고, 확장된 대역상에 다중 반송파를 이용하여 대용량의 데이터를 전송하는 변복조기법들이 적용됨에 따라, 시간 영역에서 비교적 짧은 시간 동안 존재하는 충격 잡음이 주파수 영역에서 사용 주파수 전체 대역상에 영향을 줌으로써 시스템 전체 성능 저하의 큰 요인이 되고 있다. 본 논문에서는 이러한 충격 잡음이 고속 전력선 통신 시스템에서 사용되는 OFDM(또는 DMT) 방식 수신기의 복조기 출력단 SNR에 미치는 영향을 분석 및 단순화하고, 시뮬레이션을 통해 검증한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.493-502
• /
• 2003

In this paper, to solve some problems of the Mobile IP and local registration strategy we propose a method that can effectively support real-time traffics sensitive to delay time and packet loss. The proposed method reduces the registration time after a Mobile Node's movement between networks by carrying out the pre-registration for the domain which it will move into the network information of the link layer of cdma2000 system, at the boundary cell's handoff zone. Through the cost analysis and simulation it is shown that the proposed scheme yield a better performance compared with the Mobile IP and local registration strategies in terms of packet loss for parameters; variation of the velocity of a Mobile Node, and a distance between the Mobile Node and home networks, etc.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.133-146
• /
• 2016

To engage multiple missiles in single launcher against multiple targets, launcher system has to operate for optimized launch angle to each target sequentially. If the launch angle sequence is simply defined according to the target assignment order only, overall engagement time would be increased, and even in some engagement scenarios, it could be possible to miss some moving targets being out of proper engagement area. Therefore, the study on methodology for a real-time decision of optimized launch angle sequence is necessary. In this paper, the automatic decision model of launch angle sequence was suggested to minimize total engagement time by analyzing the simulation results of all engagement sequence set for multiple moving target scenario. Performance of proposed methodology for decision of optimal launch angle sequence was verified by comparing with the optimal or suboptimal sequence obtained from simulation results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.367-372
• /
• 2018

Defects in aging infrastructures such as pre-stressed concrete bridges and cable bridges can cause a collapse of the entire structure. Defects, however, are often located inside of the structures that they are not visible from the outside. For example, in PSC bridges, because reinforcement steels are encased by exterior covers, corrosion and void on the reinforcement steel cannot be detected with a visual inspection. Therefore, in this paper, a new non-destructive evaluation(NDE) method that can detect defects inside of structures is presented. The new method utilizes sending of electrical signals, a method often utilized in electrical engineering to detect any discontinuities on power cables. In order to confirm the applicability and accuracy of the method, some experiments were conducted in the laboratory. And to overcome the hardship of conducting experiments on real structures due to their enormous size, simualtions were conudcted using a commercial program, COMSOL. The results of the experiments were analyzed and compared to confirm the accuracy of the simualtions.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.203-213
• /
• 2023

In medical ultrasound imaging systems, Side lobes may appear if signals outside the imaging point are not completely removed during receive focusing. If the time signal of the side lobe overlaps with the time signal (main lobe) from the image point, it is difficult to completely remove it using filter processing in the time domain. However, In the receive focusing process, when time-channel signals are Fourier-transformed, the main lobe and side lobe signals are spatially separated in the spectral domain. Therefore, the side lobes can be suppressed by multiplying the image with magnitude weights, which are determined by the magnitudes of the main and side lobes calculated in the spectral domain. In addition, when the main lobe and the side lobe spectrum are adjacent, the distance weight was applied based on the distance between them. In a 5 MHz ultrasound imaging system using a 64-channel linear transducer, point reflector and speckle images with cysts of various brightness were synthesized and weights were applied to the ultrasound image. Using computer simulations, we confirmed that the side lobes were greatly reduced without affecting the spatial resolution in the point reflector image, and the contrast was significantly improved in the cyst image with computer simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.26-33
• /
• 1993

본 논문은 반향제거기 등에 적용 가능한 적응 FIR 필터의 고속 수렴 알고리즘을 제시하였다. 제안된 알고리즘은 지연 평가와 영역 제한에 의한 탭위치 제어 등 두가지 특징을 가지고 있다. 반향 경로에 다중 반향이 발생했을 때에도 적용 가능한 위치 탐색에 제한을 두는 방법으로 제한된 탭위치 제어를 수행한다. 백색 가우시안 신호를 입력으로 사용한 반향제거기 시뮬레이션에 의해서 Full-tap NLMS, STWQ, 그리고 본 논문에서 제시한 알고리즘의 수렴특성을 비교한 결과, 제시한 알고리즘은 STWQ나 Full-tap NLMS 알고리즘에 비해서 256탭 적용필터에서 약 70% 정도 수렴 시간을 감소시키며, 또한 다중반향 발생 하에서 다른 알고리즘에 비해서 우수한 수렴 특성을 갖는다.