• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.122-130
• /
• 2009

Maillard reaction products (MRPs) were produced from aqueous solution of various sugars with hydrolyzed wheat gluten (HWG) with different temperatures, pressures, pH values and solvents. The physicochemical properties of MRPs were investigated and DPPH and hydroxyl radical scavenging activity and sensory properties were also assessed. MRPs from ribose and HWG evidenced the highest preference for meaty flavor and antioxidant activity and also evidenced higher antioxidant activity with larger pH reductions and higher browning index increases than were observed in other MRPs. The antioxidant activities were increased with increased reaction temperature and pressure. The most preferred meaty flavor was obtained from MRPs with ribose at 140$^{\circ}C$ in an oil bath with the pH adjusted to 9 in water as a solvent, and heated for 30 mins.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.27-31
• /
• 1997

액상법에 의한 단분산 ZnS입자의 합성을 60~9$0^{\circ}C$에서 행하여, 반응조건이 ZnS입자의 형태에 미치는 효과를 검토했다. ZnS입자의 형태는 반응 시간의 경과와 더불어 단분산으로부터 다분산 혹은 응집체로 변화하였다. 반응 온도 60~9$0^{\circ}C$에서 초기 농도적이 중간값이고, 반응시간이 짧을 경우 입경 0.2~0.8$\mu\textrm{m}$의 구상 단분산 입자를 얻었다. 또한 Ag$_2$NO$_3$, EtOH용액, $0^{\circ}C$에서, Ag$_2$S에 의한 ZnS의 균일 피복이 가능하였다.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.23-36
• /
• 2006

Experimental leaching of tailings was performed as a function of times (1, 2, 4, 7, 14, 21 and 30 days) in the laboratory using reaction solutions equilibrated to three different pH set-points (pHs 1,3 and 5). The initial pHs of 5 and 3 stabilized at either 4.6-6.1 or 2.8-3.5 in 2 days and decrease gradually with time afterwards. The results of the leaching tests indicate that the significant increase in the sulfate concentrations and in acidity after 7 days of leaching results from the oxidation of sulfide minerals. There were no significant variations in the extractable Pb found in the leach solutions of pH 5 and 3 within the reaction time (1-30 days), while Zn, Cd and Cu concentrations tend to significantly increase with time. In tailings leaching at an initial pH=1, two trends were observed: i) The 'Zn-type' (Zn, Cd and Cu), with increasing concentrations between days 1 and 30, corresponding to the expected trend when continuous dissolution is the dominant process, ii) the 'Pb-type' (Pb), with decreasing concentrations over time, suggesting rapid dissolution of a Pb source followed by the precipitation of 'anglesite' in relation to the large increase in dissolved sulfates. The high sulfate concentrations were coupled with high concentrations of released Fe, Zn and Cd. Release of Zn and Cd and acidity from these leaching experiments can potentially pose adverse impact to surface and groundwater qualities in the surrounding environment. The kinetic problems could be the important factor which leads to increasing concentrations of trace metals in the runoff water.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.355-359
• /
• 2014

Recently, many chemicals produced from renewable resources such as lignocellulosics, micro-algae and marine macro-algae, were introduced to chemical industry. Chitin/chitosan is secondly abundant feedstock on Earth. It is easily obtained from crusraceans' shells such as crab, shrimp and insects. In this work, we performed the acidic-hydrothermal hydrolysis to produce levulinic acid from chitosan using statistical approach. By design of response surface methodology, the effect of reaction temperature, catalyst amount, and reaction time and their reciprocal interactions were investigated. As a result, higher reaction temperature and catalyst amount increased the higher concentration of levulinic acid. However, reaction time did not caused large increase of levulinic acid after some reaction period. Levulinic acid of 2.7 g/L produced from chitosan in the optimized condition of reaction temperature of $175^{\circ}C$, sulfuric acid of 2.4% and reaction time of 40.7 min.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.113-113
• /
• 1995

본 연구는 표고버섯에서 분리정제한 렉틴 성분(LEL)을 말초혈액 단핵세포(PBMC)에 반응시켜 사이토카인 유도능을 지질다당류(LPS)와 비교하여 역전사효소 중합반응법(RT-PCR)으로 측정하였다. 측정 대상 사이토카인은 IL-1, IL-2, IL-6, TNF$\alpha$ 및 IFN${\gamma}$의 다섯가지였으며 이들을 대상으로 PBMC에 렉틴을 적용하여 1, 8, 24, 48, 72, 96, 120분 등의 시간대에서 반응시켜 사이토카인의 유전자 발현 유도에 관한 다음의 결과를 얻었다. LEL의 사용 농도에 따른 편도선 림프구(tonsillar lymphocyte)의 TNF$\alpha$ 유전자 발현 양상은 반응 1시간의 경우 LEL의 일부 농도와 LPS 전농도에서 관찰되었으나 반응 40시간째에는 LEL 전농도와 LPS 전농도에서 TNF$\alpha$ 유전자 발현 양상을 관찰할 수 없었다. RT-PCR 결과 원액이나 회석액 재료로부터 관찰된 TNF$\alpha$유전자 band의 강 약 차이는 나타나지 않았다. LEL의 자극에 의한 반응 시간대 별 PBMC에 의한 사이토카인 유전자 발현 양상은 위에서 언급된 다섯가지 사이토카인을 유도, 생성할 수 있다는 것이 확인되었는데, IL-2, IL-6 및 IFN${\gamma}$는 120시간까지 장시간 지속되는 유전자 발현이 가능한 반면 TNF $\alpha$의 생성 양상은 이들 사이토카인의 생성 양상과는 판이하게 반응 1, 8 및 24 시간대까지만 TNF$\alpha$ 유전자 발현을 관찰할 수 있었고 IL-1은 72 시간까지 반응을 나타내는 등 특이적 양상을 보였다. 한편 LPS는 실험에 사용된 전 사이토카인의 유전자 발현을 120시간대까지 반응이 유지됨을 관찰하였기에 LPS가 PBMC의 강력한 사이토카인 유도체임을 입증할 수 있었으며 LEL과 다소 상이한 결과를 보였으나 LEL 또한 PBMC로부터 사이토카인을 생성 유지시킬 수 있는 유도체로 작용함을 확인할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.242-246
• /
• 1999

For the fluorination of $CF_2Cl_2$, the yield of $CF_4$ was found to be increased with the contact time and the reaction temperature. When the mole ratio of HF/$CF_2Cl_2$ is 3 or above, the yield of $CF_4$ was attained to 100% at $370^{\circ}C$ and contact time of 3 seconds. In the case of the fluorination of $CCl_4$ with HF, the yield of $CF_4$ was obtained above 90% at the reaction temperature of $500^{\circ}C$, the contact time of 3 seconds, and the mole ratio of HF/$CCl_4$ of 5.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2011

Accurate response analysis of long span bridges subjected to seismic excitation is important for earthquake hazard mitigation. In this paper, the performance of a typical four span continuous reinforced concrete bridge model subjected to asynchronous multiple seismic excitations at the supports is investigated in both the time and frequency domains and the results are compared with that from a relevant uniform support excitations. In the time domain analysis, a linear modal superposition approach is used to compute the peak response values. In the frequency domain analysis, linear random vibration theory is used to determine the root mean square response values where the cross correlation effects between the modal and the support excitations on the seismic response of the bridge model are included. From the two sets of results, a practical range of peak factors which are defined to be the ratio of peak and the root mean square responses are suggested for displacements and forces in members. With reliable practical values of peak factors, the frequency domain analysis is preferred for the performance based design of bridges because of the computational advantage and the generality of the results as the time domain analysis only yields results for the specific excitation input.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.165-170
• /
• 2002

The aim of this study was to analyze the effect of different sensory information on the motor function which is resulted from visual stimuli. Particularly, it was focused on the effect of complementary color stimuli on reaction time. Twenty volunteers(10 men & 10 women), between the age of 20 and 25 yearn participated in this experiment. Experiments were carried out in a light & sound-attenuated chamber, and the overall system consisted of a PC. interface card. LEDs. key board switch, and display panel. Although many measurements of sensory-motor integration has been studied the quantitative analysis of sensory-motor integration has not been developed well. Quantitative analyses were performed to investigate the effect of the different sensory information on the arm motor system in the point of view sensory-motor integration. The result showed that the reaction time for visual stimuli of complementary colors was faster than that under same color environments : and, in same color environments and the reaction speed was varied inversely with respect to the magnitude of the light wavelength.

• Journal of Welding and Joining
• /
• v.2 no.2
• /
• pp.1-6
• /
• 1984

피복아아크 용접봉(이하 용접봉이라 함)의 피복제는 염기도에 따라 산성, 중성, 염기성으로 대별할 수 있다. 용접에서의 화학야금반응은 제강의 화학야금반응과 원리는 비슷하나 양자간 크게 다른 점은 용접시의 반응시간이 극히 짧다는 점이다. 이와같이 반응시간이 짧다는 점 이외에도 작업자가 직접 용융반응을 지켜 보면서 반응후에 나타나는 제반 문제점에 대비하여야 하는 어려운 점이 있다. 제강반응은 전문가만의 독특한 기술인 반면 용접은 용접봉 제조자 뿐만 아니라, 용접작업자 고유의 기술이므로 용접야금반응을 상식화 하고자 하는데 본 고는 의의를 두고 있다. 피복제 중에서의 염기도의 변화, 즉 염기도에 영향을 크게 미치는 탄산칼슘의 양을 임의로 변화시키므로서 다음과 같은 현상을 기대할 수 있다. (1)용접 작업성의 변화 (2)용착 금속의 화학성분 변화 (3)용착금속의 조직 변화 (4) 용착금속내의 수소 함유량 변화 (5)용착금속의 기계적 성질변화 등이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1385-1390
• /
• 2016

Gallic acid is a representative hydroxybenzoic acid and is found in free form in several plants and in various esterified forms as a part of hydolyzable tannins. Convenient enzymatic transformation of trihydroxylated gallic acid with polyphenol oxidase originating from pear was evaluated to investigate whether polyphenol oxidase can be used as a valuable compound to improve the biological activity of gallic acid. Enzymatic oxidation processing of gallic acid using polyphenol oxidase was carried out for five different reaction times. The antioxidant effects of transformed gallic acid for different reaction times were evaluated via radical scavenging assays using 1,1-diphenyl-2-picrylhydrazyl and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radicals. In addition, the anti-diabetic property of the transformed gallic acid was measured based on ${\alpha}$-glucosidase. Gallic acid reacted for 5 h showed significantly higher antioxidant and ${\alpha}$-glucosidase inhibitory activities compared to the tested positive control substances. Biotransformation of simple gallic acid induced by polyphenol oxidase might be responsible for enhancing the biological activity of gallic acid.