• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.240-244
• /
• 2019

본 연구에서는 2차원 수치모형(Nays2DH)을 적용하여 금강 상류에 건설된 세종보를 중심으로 보 개방 후에 홍수량 변화에 의한 하도의 지형변화 과정을 분석하였다. 수치모의를 위한 홍수량은 금남수위표에서 2018년 1월부터 2018년 12월까지 각 시간별 유량을 일반화(normalizing) 하여 하였다. 부정류 홍수량은 2018년 7월의 홍수량 $3,341m^3/s$을 적용하였으며, 부정류의 첨두유량($3,341m^3/s$)이 발생시간은 28시간이고 유출량은 $108.1m^3/s$으로 설정하였다. 수치모의 시간은 120시간으로 설정하여 사주의 발달, 이동, 사주의 형상 및 하도 지형변화를 분석하였다. 첨두유량은 $2,281m^3/s$, 2차 첨두유량은 $3,515m^3/s$, 3차 첨두유량은 $4,259m^3/s$으로 각각 26시간, 107시간, 200시간 동안 발생하는 부정류를 적용하였다. 수치모의 구간은 세종보를 중심으로 상하류 6.5 km 구간을 설정하였으며, 보는 완전히 개방된 것으로 설정하였다. 단일 홍수가 유입될 때 보다, 3개의 홍수가 연속으로 유입될 때에는 보 상류에서 사주의 크기가 크고, 사주의 수가 증가하며, 저수로의 변화가 다양하였다. 흐름이 집중되는 구간에서 하상은 깊게 세굴 되어 하천구조물의 안정과 주의가 필요하다. 그러나 하도의 다양성과 역동성이 크게 개선되는 특성을 보여주었다. 하상의 종방향 특성을 고려할 때, 세종보 하류에서는 하상고가 상승하는 특성을 보여 주었으나, 하상고가 불규칙한 특성을 보여주었다. 이는 단일홍수에 비해하여 하도의 역동성이 큰 것을 의미한다, 사주의 이동속도는 1차 첨두유량일 때 가장 빠르게 나타났지만, 이후 2차 및 3차의 유량이 더 많았지만 사주의 이동속도가 감소하였다. 보를 완전개방 하였을 때는 흐름이 안정화 되어 이동속도 변동폭이 작아졌다.

• Water for future
• /
• v.25 no.3
• /
• pp.115-124
• /
• 1992

The peak flood discharge at a downstream station and the flood travel time between a pair of dams due to a specific flood release from the upper reservoir are computed using a hydraulic river channel routing method. The study covered the whole reservoir system in the Han River. The computed peak flood discharges and the travel times between dams were correlated with the duration and the magnitude of flood release rate at the upstream reservoir, and hence a multiple regression model is proposed for each river reach between a pair of dams. The peak flood discharge at a downstream location can be converted to the peak flood stage by rating curve. Hence, the proposed regression model could be used to forecast the peak flood stage at a downstream location and the flood travel time between dams using the information on the flood release rate and duration from the upper dam.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.92-96
• /
• 2004

본 연구에서는 지하수위 변동 분석을 위한 프로그램을 개발하고, 건설교통부에서 설치, 운영하고 있는 169개 국가 지하수 관측소의 264개 지하수관측정에서 측정된 지하수위자료에 적용하였다. 분석결과 암반대수층과 충적층대수층의 평균수위 및 변동양상이 대체적으로 비슷하게 나타났으며, 이는 관측소 설치 지역의 대부분에서 충적층(10m 내외)과 암반층(70m 내외)이 수리적으로 연결되어 있다는 것을 시사한다. 6시간 간격의 지하수위 관측 자료를 이용하여 지하수위가 상승하는 횟수, 상승량의 합계 산정 등 변동양상을 분석하였다. 분석 결과 해양 및 지구 조석의 영향을 받는 관측정의 경우 지하수위 상승 개수가 450개/yr 이상이 대부분이며, 수위 변동량은 0.1 ～ 1m 정도이고, 수위변동 자료를 시계열로 나타내 보면 하루에 약 2번의 상승과 하강을 반복하는 수위변동 형태를 볼 수 있었다. 양수의 영향이 우세한 관측정에서는 수위 상승 개수가 약 360개/yr, 수위 변동량은 1m 이상의 값이 우세하게 나타났다. 지하수위 상승량은 암반/충적 관측정 모든 관측정에서 전반적으로 강수량과의 상관계수가 높았으며, 같은 관측정의 .자료라도 6시간 간격의 관측 자료보다, 12시간 및 24시간 관측 간격으로 분석한 결과에서 상관관계가 더 높게 나타났다. 12시간 및 24시간 관측 간격으로 분석할 경우 조석 및 양수에 의해 발생된 주기적인 지하수위 변동 성분이 제거되면서 강수에 대한 지하수위 반응의 상관도가 높아진 것으로 해석된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.370-374
• /
• 2011

기후변화에 따른 수해를 대비하기 위해서는 미래의 확률강수량을 알아야 한다. Global Circulation Model(GCM)은 미래의 기후변화를 예측하기 위하여 많은 분야에서 널리 쓰이고 있다. GCM의 시간축척은 일반적으로 월단위로 시간단위 자료를 사용하는 수공학 분야에 직접적으로 적용하기에는 많은 문제가 있다. 또한 GCM 예측값은 실강우값과 큰 편의(bias)를 가지고 있어 직접적인 적용이 힘들다. 이런 문제를 해결하고자 다양한 다운스케일(downscale)기법이 연구되고 있다. 다운스케일기법을 적용하여 시간자료를 예측하면 전반적인 통계값을 잘 재현해내나, 극치값의 경우 잘 재현해내지 못하는 문제가 있다. 이런 문제점을 극복하고자 본 연구에서는 연최대 월강수량과 연최대 시간강수량의 이변량빈도해석을 통하여 기후변화를 고려한 강우-지속기간-빈도 관계의 변화를 평가해보고자 한다. 본 연구는 연최대 월강수량과 연최대 시간강수량과의 관계가 변하지 않는다는 가정하에 관측강수량을 이용하여 연최대 월강수량과 연최대 시간강수량의 이변량분포모형을 구축하였다. 이변량 분포모형을 구축하기 위하여 copula 모형을 적용하였다. 구축된 모형에 GCM으로 예측된 연최대 월강수량을 적용하여 미래의 확률강수량을 평가하였다. 본 연구에서는 서울지점을 대상지점으로 선정하였으며, A2 기후변화시나리오를 적용한 GCM 예측값을 이용하였다. 적용결과 A2 기후변화 시나리오 상에서 미래의 확률강수량이 크게 증가하는 것이 확인되었다.

• Journal of Wetlands Research
• /
• v.6 no.3
• /
• pp.119-126
• /
• 2004

In recent, the critical rainfall duration concept is widely used but we do not have understandable criteria yet. However, the critical rainfall duration is usually calculated considering concentration time, runoff model using effective rainfall, and unit hydrograph for the estimation of design flood. This study is to derive the regression equations between the critical rainfall duration and hydrologic components such as the basin area, slope, length, CN, and so on. We use a GIS tool which is called the ArcView for the estimation of hydrologic components and the HEC-1 module which is provided in WMS model is used for the runoff computation. As the results, the basin area, basin slope, and basin length had a great influence on the estimations of peak runoff and critical rainfall duration. We also investigated the sensitivities for the peak runoff and critical duration of rainfall from the correlation analysis for the involved components in the runoff estimation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.323-330
• /
• 2010

The time in port for vessels is one of the important factors for analyzing the operation status and the capacity of ports. In addition, the time in port for vessels can be directly used for estimating the greenhouse gas emissions resulted from vessels in port. However, it is unclear which variables can affect the time in port for vessels and what the marginal effect of each variable is. With these challenges in mind, the study analyzes the time in port for vessels arriving and departing port of Busan by using a parametric survival model. The results show that the log-logistic accelerated failure time model is appropriate to explain the time in port for 19,167 vessels arriving and departing port of Busan in 2008, in which the time in port is significantly affected by gross tonnage of vessels, service capacity of terminal, and vessel type. This study also shows that the greenhouse gas emission resulted from full-container vessels, which accounted for about 61% of all vessels with loading/unloading purpose arriving and departing port of Busan in 2008, is about "17 ton/vessel" in the boundary of port of Busan. However, the hotelling greenhouse gas emissions resulted from non-container vessels (3,774 vessels; 20%) are greater than those from the full-container vessels. Hence, it is necessary to take into account more efficient port management polices and technologies to reduce the service time of non-container vessels in port of Busan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2427-2435
• /
• 2013

Design hourly volume and the K-factor, first proposed by FHWA in the 1950s, is based on the 30th hourly traffic volume during a year (out of 8,760 hours). It was used when surveying the traffic volume was laborious in the past and is still being used now although it leaves some to be desired for practical applications. More reasonable K-factor for better design, based on theoretical evidence, is needed. This paper proposes the knee searching method based on simple linear regression to find out the inflection point of the volume ranking curve that describe the annual 8,760 hourly traffic volumes. The method was applied to the Chungcheong province's national highway, and the results were compared to the existing guidelines' values of K-factors. Identified design hourly traffic volumes ranked between 43rd to 694th, which is much lower than the 30th volume, meaning that some overdesign examples are inevitable if the conventional $30^{th}$ volume is used.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.165-170
• /
• 2005

A basic study for the development of a disk type oil skimmer for a tank lorry, compares via experiments to the oil recovery differences by material between the existing oil skimmer disk and several discs which oil adhesion are possible. The experiment results in this study are summarized as follows: In all the disks, the mass of recovery of bunker-A oil was greater than light oil. In light oil, there was nearly no differences in the mass of oil recovery by disk material, but in the case of bunker A oil, recovery efficiency showed big differences depending on the disk materials. For light oil, the differences in the mass of oil recovery per unit of operation time from the initial time zone were hardly shown. However, the mass of recovery of bunker-A oil linearly increased from the initial operation time in all the disks and the increase shaped a slow moving trend as time went on; therefore, the mass of oil recovery per unit of operation time showed differences depending on time. This result shows that oil viscosity has an effect on the disk recovery efficiency. When comparing the mass of pure oil recovery and the mass of water recovery in the total mass of recovery by bunker-A oil, there was no difference in the mass of oil recovery between the window-aluminum material disk and the disks consisting of other materials, but the mass of water recovery of the former was relatively very small. This shows the most ideal result in view of oil recovery efficiency that considers the mass of water recovery. In conclusion, it was found that aluminum is the most advantageous as the material for tank lorry oil skimmer disk.

• Korean journal of food and cookery science
• /
• v.10 no.2
• /
• pp.94-98
• /
• 1994

Hardness and elasticity for SurichwijuIPyun(Korean rice cake supplemented with Surichwi) made with various levels of Surichwi(O∼40%) boiled in 1% sodium bicarbonate added water were decreased by increasing additional rate of Surichwi, but adhesiveness and cohesiveness didn't show constant increase or decrease. Guminess and chewiness showed significant differences by decreasing additional rate of Surichwi. As a results of sensory evaluation of Surichwiiulpyun, Julpyun supplemented with 20fs Surichwi showed the most favorite tendency in color, flavor and overall acceptability. Textural characteristics of Surichwijulpyun supplemented with 20 and 30% Surichwi in storing at 20$^{\circ}C$ showed less change than those of 0 and loft group. Gumminess and chewiness showed similar trend to hardness, and there were significant differences in additional rate of Surichwi and storage time.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.103-108
• /
• 2005

For the development of a disk type oil skimmer for a tank lorry, a basic study on comparison of oil recovery performance between disk materials of oil skimmer was conducted. The experiment results are summarized as follows: In all the disks, the volume of recovery of bunker-A oil was greater than diesel oil. In light oil, there was nearly no differences in the volume of oil recovery by disk material, but in the case of bunker A oil, recovery efficiency showed big differences depending on the disk materials. For diesel oil, the differences in the volume of oil recovery per unit of operation time from the initial time zone were hardly shown. However, the volume of recovery of bunker-A oil linearly increased from the initial operation time in all the disks and the increase showed a slew moving trend as time. went on; therefore, the volume of oil recovery per unit of operation time showed differences depending on time. This result shows that oil viscosity has an effect on the disk recovery efficiency. When comparing the mass of pure oil recovery and the volume of water recovery in the total mass of recovery by bunker-A oil, there was no difference in the volume of oil recovery between the window-aluminum material disk and the disks consisting of other materials, but the volume of water recovery of the former was relatively very small This shows the most ideal result in view of oil recovery efficiency that considers the volume of water recovery. In conclusion, it was found that aluminum is the most advantageous as the material for tank lorry oil skimmer disk.