• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.857-865
• /
• 2016

It has been four years after outsouring to private outsourced institute about calculating the costs on defense industry was commenced. Although the objectivity and reliablity has been improved somewhat, there were also a negative view of spending more time and money such as a costing official re-calculates the costs on the results by out-sourced institute. Therefore I want to study on countermeasure about the risks according to the importance by analysing a priority with deriving susceptible risk factors from the outsourced institute's conduct of calculating the costs in defense industry through this study. The purpose of this study contributes to the reduction of defense budget, a guarantee of the reasonable profit for defense suppliers and the improvement the effective strength of an army with a smooth supply procurement by managing the risks in advance about the conduct regarding to the outsourcing for calculating costs on defense materials in the future.

• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.254-260
• /
• 2014

We studied water level rising of drum versus time in the small hydraulic vertical water turbine system in this paper. The water level rises continuously up to a certain point with the passage of time if the constant incoming water is supplied, while it stops rising and maintains equilibrium state without any more rising because it increases position energy and evatually makes outgoing velocity and outgoing water quantities of runner area. The water level of drum is determined independent of size, height, width, figure of drum or runner configuration. It comes out that the water level is dependent only on the incoming and outgoing water quantities, and the output power has similar behavior. Therefore, desirable water level and output power are not available unless incoming water quantities is abundant. We validate this phenomina through applyng our methodolgies to the real small hydraulic vertical water turbine system under constructing and testing in industrial facilities in Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.21-27
• /
• 2014

In this study, the prediction methods for the crest settlement after impounding and the maximum internal settlement during dam construction were proposed through the analysis on settlement data at 46 monitored points of 37 Center-Cored Rockfill Dams (CCRDs). Results from this analysis provided that the crest settlement increases with elapsed time, and from the relationship between the dam height and the maximum internal settlement during dam construction, it is confirmed that the internal settlement was largely evaluated when the coarse-grained material was used as the dam core. This internal settlement increased in proportion to the dam height. In addition, the crest settlement of the CCRD with the core compacted with fine-grained material was relatively large. It is expected that the results of this study would provide the practical tool for the design, construction and management of CCRDs.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03a
• /
• pp.289-309
• /
• 2004

위에서 언급한 바와 같이 계측대상 연약 지반이 대심도, 광역화함에 따라 연약지반 계측의 전반적인 추세는 자동계측 시스템의 사용과 준설ㆍ매립공사 또는 해수면상에서의 공사 특성상 케이블 관리의 어려움을 극복하고자 무선데이터 전송방식의 사용이다. 또한 유지관리의 필요성 증대로 인하여 계측 모니터링, 자동분석 프로그램의 기술도 발전되고 있다. 그러나 아직 국내는 계측에 대한 기술 개발이 미비할 뿐 아니라 계측기술에 대한 인식이 매우 부족하고, 관련법이 정비되지 못하여 계측관련 기술 및 경험이 전무한 영세업체들까지 난립하여 치열한 경쟁을 하는 관계로 기술개발에 대한 투자는 거의 중단된 상태이다. 따라서 정확한 유지관리 계측을 위해서는 대부분 외산기기에 의존할 수밖에 없는 상황이다. 그러나, 현재 국내의 전자통신 기술의 수준을 감안할 때 관련법이 정비되고 체계적인 연구와 투자가 이루어진다면 쉽게 세계적인 수준으로 도약할 수 있으리라 판단된다. 한국지반공학회의 연약지반위원회에서는 2003년 8월 20일 한양대학교 박물관 강당에서 학술세미나를 개최하였다. 본격적인 세미나에 앞서 '연약지반 공학자의 당면문제 및 해결방안'에 관한 주제로 전 연약지반위원회 위원장이셨던 (주)에스코 컨설턴트의 김승렬박사께서 초청강연을 하여 주셨다. 김승렬박사께서는 그 원고의 꼬리말을 다음과 같이 기술하며 마무리하셨다. 국내 연약지반 기술수준의 상황과 우리의 위상을 제고하기 위한 좋은 말씀으로 생각되어 본고에서는 그 부분을 인용하는 것으로 끝을 맺고자 한다. '우리나라의 연약지반 기술수준은 동남아시아 지역의 국가들인 싱가포르, 대만, 태국, 심지어는 베트남에 비해 결코 우월한 위치에 있지 않다. 오히려 많이 낙후되었다고 할 수 있다. 경제규모와 위상과 발전상태에 비추어 보면 실로 부끄러운 일이 아닐 수 없다. 이렇게 된 배경에는 연약지반이 사회의 문제로 대두되는 일이 미미하여 이 분야에 쓸리는 관심이 상대적으로 적은 점이 주원인이라고 볼 수 있다. 연약지반이 기술현장에서 문제로 떠오르기 시작한지도 째 오랜 시간이 경과하였다. 이제 더 이상 우리의 기술수준을 이대로 방치할 수는 없는 시점에 와 있는 것이다. 연약지반에 몸담고 있는 우리 스스로가 위상을 지키려는 노력을 배가하여야 한다. 연약지반 공학자들은 스스로 고급의 데이터를 생산하고 평가하고 예측하는 기법을 활발하게 적용하고 발전시킴으로써 자신들의 위치를 지켜야 할 것이다. Clean-handed-research만을 고집하는 환상에서 깨어나 국외의 변모하는 모습을 빠르게 수용하고 국내의 연약지반 관련 자료를 국외에 널리 알릴 수 있는 위치로 발돋움할 때 연약지반 공학자의 위상도 제고될 것이다.'

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.31-37
• /
• 2012

This paper describes to analyze the ventilation performance of a room air conditioner for indoor comfort control. An experimental apparatus consists of a test room, the room air conditioner, a tracer gas measurement system, a supply fan and a controller. Ventilation performance as a function of human occupancy is evaluated with supply ventilation air using a tracer gas technique of CO2 gas in the test room. The ventilation performance is evaluated in a step-down method based on ASTM Standard E741-83 and is found to increase with increasing supply ventilation rate. The CO2 gas concentration is decayed rapidly without human occupancy. The ventilation performance without human occupancy increases up to 55% and the ventilation performance with one person increases up to 25% at the supply air of 570 lpm comparing with a natural reduction after one hour. A modeling for ventilation performance of a room air conditioner in a test room is presented using experimental datum.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.79-79
• /
• 2011

water cavitation peening(WCP)은 water jet 과정으로 인한 cavitation이 발생할 때, 금속표면 cavitation 현상에 의해 재료표면의 잔류응력과 경도 등의 물성을 변화시키게 되며, 그로 인해 생긴 잔류 응력으로 재료의 내구성 및 수명을 향상시키는 기술이다. 최근에는 water jet을 이용한 장치들이 건설 분야, 일반기계분야, 컷팅 공정, 분쇄 등 다양한 분야에서도 사용되고있다. 그러나 water jet을 이용한 peening은 소개 된지 20여년이 경과했음에도 불구하고 연구 및 개발 내용은 shot peening에 비해 아직 초기 단계이다. water cavitation peening은 기존의 피닝 방법의 단점을 보완 할 뿐만 아니라 환경적인 측면에서도 그 가치가 크다. 아직은 다른 peening 기법 보다 잔류압축응력 부가 측면에서 그 효과가 떨어지지만, water cavitation peening은 열에 영향을 받는 영역이 생성되지 않으며, 기계의 표면 가공을 하는 동안 어떤 미세한 먼지도 생성하지 않아 친환경적이다. 또한 복잡한 외형을 가지는 부품 및 내면에 적용성이 뛰어나고, 표면 정밀도 저하가 낮다는 장점이 있다. 본 연구에서는 조류발전용 블레이드의 재료로 사용하려는 동합금에 대하여 증류수 내에서 water cavitation peening 시간, 거리, 파형 등의 변수를 적용하여 최적 조건을 찾고, 다양한 전기화학적 실험을 실시하였으며, water cavitation peening 부의 부식특성을 평가 하였다. ASTM-G32 규정에 의거하여 압전효과를 용한 진동발생 장치(RB 111-CE)를 이용하여 동합금 표면에 water cavitation peening을 실시하고, 실험 후 표면의 손상거동을 관찰하기 위하여 3D현미경 및 전자주사현미경(SEM)을 사용하였다. 물성치 변화를 확인하기 위하여 SHIMADZU사의 HVM-2 Model의 비커스 경도기를 이용하여 표면 경도값을 측정하였다. 전기화학실험은 각 3회 이상 실시하였으며, Tafel 분석결과로 부식전류밀도와 부식전위의 평균, 부식전위를 알 수 있었고, 음분극 실험결과, 용존산소 환원반응에 의한 농도분극에서 수소가스발생에 의한 활성화 분극으로 진행되는 변곡점을 확일 할 수 있었다.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.469-478
• /
• 2001

In the virtual memory system, page replacement policy exerts a great influence on the performance of demand paging. There are LRU(Least Recently Used) and LFU (Least Frequently Used) as the typical replacement policies. The LRU policy performs effectively in many cases and adapts well to the changing workloads compared to other policies. It however cannot distinguish well between frequently and infrequently referenced pages. The LFU policy requires that the page with the smallest reference count be replaced. Though it considers all the references in the past, it cannot discriminate between references that occurred far back in the past and the more recent ones. Thus, it cannot adapt well to the changing workload. In this paper, we first analyze memory reference patterns of eight applications. The patterns show that the recently referenced pages or the frequently referenced pages are accessed continuously as the case may be. So it is rather hard to optimize page replacement scheme by using just one of the LRU or LFU policy. This paper makes an attempt to combine the advantages of the two policies and proposes a new page replacement policy. In the proposed policy, paging list is divided into two lists (LRU and LFU lists). By keeping the two lists in recency and reference frequency order respectively, we try to restrain the highly referenced pages in the past from being replaced by the LRU policy. Results from trace-driven simulations show that there exists points on the spectrum at which the proposed policy performs better than the previously known policies for the workloads we considered. Especially, we can see that our policy outperforms the existing ones in such applications that have reference patterns of re-accessing the frequently referenced pages in the past after some time.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2013

The slime, deposited in the bored pile due to falling soil particle, reduces the bearing capacity of bored pile and thus the stability of construction also decreases. The weight pendulum and iron have been used for estimating the slime thickness based on the subjective judgment and thus the previous method has a limitation of reliability. The objective of this paper is to suggest the method for estimating the slime thickness by using characteristics of electrical resistivity as scientific method. The temperature-compensation resistivity probe (TRP), which has a conical shape and the diameter of 35.7mm, is applied to the measurement of the electrical resistivity in the borehole during penetration. The field tests are carried out for estimating the slime thickness in the application site of bored pile. The slime thickness is calculated through the difference between excavation depth of borehole and measured data. Furthermore, the laboratory tests are also conducted for investigating effects of casing, time elapsing and relative density by using the specimen of slime. The laboratory test supporting the suggested method is reasonable for determining the slime depth. The paper suggests that the electrical resistivity method may be a useful method for detecting slime thickness and the method is expected to be applicable to various sites of bored piles.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2012

To arrange effectively artificial reefs for marine afforestation, tidal currents were analyzed by numerical experiments, and particle tracking based upon tidal currents were carried out to clarify the path of algae spore. The experiments were carried out by EFDC (Environmental Fluid Dynamics Code), and water column was vertically divided 10 layers. Tidal current patterns showed to be affected by main current at outside of study area, and circle currents of two were observed from analysis of residual currents. Particle tracking were experimented for 15 days at 2 installation places in which artificial reefs for marine afforestation would be deployed. According to the results of particle tracking experiment, particle movement at St.1 showed belt type along coastal line, and St.2 showed ellipse type at 300~500 m distant from coastal line. It suggest that artificial reefs for marine afforestation should be installed belt zone at station of St.1 and ellipse zone at St.2. Modelling algae transport was also tested to account for local dispersion of algae spore due to the suspended materials.