• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.43-52
• /
• 1999

We propose a new method for tuning of center wavelength in photorefractive filter using $LiNbO_3$ crystal doped with 0.015Wt.% Fe. through the filter bandwidth property analysis using the geometrical method, a new wavelength selectivity theory was presented. In this scheme, the tuning of the center wavelength can be achieved by the real time incident angle control of the received heam, which was gotten by the spatial light modulator. So, tuning time depend on the response time of the SLM and results in the high speed turing. Because the use of thermally fixed grating in our filter, it has uniform diffraction property to the all filtering wavelength. Designed tunable filter has 4nm bandwidth and composed of the three channel with 10nm space. From the optical experiment, we get the 4.5nm, 4.25nm, 4nm bandwidth and 1530.5nm, 1540.5nm, 1549.5nm center wavelength respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.207-216
• /
• 1999

A phased array is a multi-element piezoelectric device whose elements are individually excited by electric pulses at programmed delay time. One of the advantages of using phased array in nondestructive evaluation (NDE) application over conventional ultrasonic transducers is their great maneuverability of ultrasonic beam. There are some parameters such as the number and the size of the piezoelectric elements and the inter-element spacing of the elements to design phased array transducer. In this study, the characteristic of ultrasonic beam for phased array transducer due to the variation of the number of elements has been simulated for ultrasonic SH-wave on the basis of Huygen's principle. Ultrasonic beam directivity and focusing due to the change of time delay of each element were discussed due to the change of the number of piezoelectric elements. It was found that ultrasonic beam was much more spreaded and hence its sound pressure was decreased as steering angle of ultrasonic beam was increased. In addition, the ability of ultrasonic bean focusing decreased gradually with the increase of focal length at the same piezoelectric elements. However, the ability of beam focusing was improved as the number of consisting elements was increased.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.401-406
• /
• 2018

According to the National Security Service of the National Police Agency, intrusion into empty houses increased form 2013 to 2016. Consequentially this statistics seemed that house intrusion, burglary is increasing. Also according to the statistics of Public Prosecutors'Office, a total 203,573 theft crimes occurered in 2016, of which 18.9% were theft after intruding. By reson of this is most frequent case of intrusion and theft, we have been studing the RodSecurityRobot model to enhance security in many factories to manage. In order to care for security to the high place, we have propsed a road guard robot model which controls the ground in cooperation with the robot that manages the ground by using the drones. The robot and the drone move together to autonomy to avoid objects. And they check time interval. they also goes to the charger to charge when there is no battery.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.90-101
• /
• 2016

This study was initiated to develop an algorithm for traffic condition adaptive optimal traffic signal control for isolated intersections based on the vehicle trajectory data. The algorithm determines the optimal cycle length, phase lengths, phase sequences using the data collected under V2X communication environment every second. In addition, the algorithm utilizes a traditional feature of the actuated signal control, gap-out, using traditional detector systems to consider the mixture of normal vehicles and vehicles equipped with the V2X communication function. The performance of the algorithm was compared with that of the fixed signal timing plan which was optimized with Synchro under a microscopic traffic simulation-based test bed. As a result, the overall performance, including average delay, average stop delay, the number of stops, and average speed, are improved apparently. In addition, the amount of improvement get bigger as the traffic volume in the intersection as well as the number of vehicles equipped with the V2X communication function increase.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.237-245
• /
• 1997

In this paper, a flow control mechanism is proposed which is based on the priority control between communication path of a node. In this scheme, demanding length of a data queue for any pre-defined, then each node in that path is forced to maintains buffer size under the limit by controlling priority level of the path. The communication path which requires higher bandwidth sets its demanding queue length smaller. By providing relationship between the priority of a path and length of its queue, the high bandwidth requesting path has a better chance to get high bandwidth by defining the smaller demanding queue size. And also, by forcing a path which has high flow rate to maintain small queue size in the path of the communication, the scheme keep the transmission delay of the path small. The size of the demanding queue of a path is regularly adjusted to meet the applications requirement, and the load status of the network during the life time of the communication. The priority control based on the demanding queue size is also provided in the intermediate nodes as well as the end nodes. By that the flow control can provide a quicker result than end to-end flow control, it provides better performance advantage especially for the high speed network.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.559-565
• /
• 2016

For the purpose of the research, it is analyze the influence traffic Signal Progression on a CBD by expansion of Permissive Left-Turn on the advanced traffic management system program compared with traffic response control For this, divided a average distance between intersections, a traffic network on five district in four city. As the result, Volume of the traffic management system on a advanced traffic management system program compared with traffic response control is effective in traffic signal cycle 160sec 286car per lane, in 140sec 308car, 120sec 264car. As well, for a traffic network as the length of a traffic network 2.0~3.0km, under 2.0km, all of traffic signal cycle(160sec, 140sec, 120sec) a passing band and stop is more effective. But the traffic management system on traffic response control compared with the traffic management system on a advanced traffic management system program is effective in the length of a traffic network over 5.0km. For the efficiency of traffic signal system manage, it should be runned the traffic management system on traffic response control in addition to the traffic management system on a advanced traffic management system program on CBD. As the result of simulation the business in chungju-si, the travel speed of the traffic management system on a advanced traffic management system program is 41.2km/h and the travel speed of traffic response control is 37.5km/h. Therefore, it should be runned per length of a traffic network the traffic management system on traffic response control in addition to the traffic management system on a advanced traffic management system program on CBD.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.373-381
• /
• 2012

An automatic flow and water quality monitoring system was applied to estimate pollutant loads to an urban stream during storm events in DTV (Daeduk Techno Valley), Daejeon, Korea. The monitoring system consists of rainfall gage, ultrasonic water level meter, water quality sensors for DO, temperature, pH, conductivity, turbidity and automatic water sampler for further laboratory analysis. All data are transmitted through on-line system and the monitoring system is designed to be controlled manually in the field and remotely from laboratory computer. Flow rates were verified with field measurements during storm events and showed good agreements. Automatic sampler was used to collect real time samples and analyzed for BOD, COD, TN, TP, SS and other pollutant concentrations in the laboratory. SWMM (Storm Water Management Model) urban watershed model was applied and calibrated using the observed flow and water quality data for the study area. While flow modeling results showed good agreement for all events, water quality modeling results showed variable levels of agreement. These results indicate that current options in the SWMM model to predict pollutant build up and wash-off effects are not sufficient to satisfy modeling of all the rainfall events under study and thus need further modification. This study showed the automatic monitoring system can be used to provide data to assist further refinement of modeling accuracy. This automatic stormwater monitoring and modeling system can be used to develop basin scale water quality management strategies of urban streams in storm events.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.1
• /
• pp.12-18
• /
• 1985

In general the impulse sound sources of underwater generated by electric arc discharge had used static energy of the charged capacitors. The author proposed an underwater arc discharge sound source using secondary voltage of high voltage transformer without capacitors. The arc discharge device was composed of a high voltage transformer and a switching system. The impulse current in the primary turn of the high voltage transformer is controlled by the switching system and inductive current of the secondary turn in the high voltage transformer is used in making impulsive arc discharge. A series of experiment have been carried out to observe the acoustic characteristics of the impulse sound source generated by the arc discharge. The results obtained were as follows: 1. Secondary current at the time of arc discharge keeps after ohm's law in the beginning and the maximum current flows out as soon as arc discharge breaks out. 2. A time difference between a start of applied current and a generation of arc discharge sound is the 3msec and it is generated arc sound when breaking down electric insulation at maximum voltage. 3. The sharper the end of electrodes and the higher the secondary voltage, the higher the sound pressure level. 4. Arc discharge sound was generated even at the distance of 100cm between electrodes and was stably reproductive at the gap of 1cm to 100cm. 5. Electric arc discharge sound wave is a shock wave of pulse-width of 0.15msec and spectral distribution of it is plenty of low frequency components less than 10 KHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.638-644
• /
• 2002

In this paper, we implemented a three dimensional image display system using stereogram and holographic optical memory techniques which can store many images and reconstruct them automatically. In this system, to store and reconstruct stereo images, incident angle of reference beam must be controlled in real time, so we used BPH(binary phase hologram) and LCD(liquid crystal display) for controlling reference beam. The reference beams are acquired by Fourier transform of BPHs which designed with SA(simulated annealing)algorithm, and the BPHs are represented on the LCD with the 0.05 seconds time interval using application software for reconstructing the stereo images. And input images are represented on the LCD without polarizer/analyzer for maintaining uniform beam intensities regardless of the brightness of input images. The input images and BPHs are edited using application software(Photoshop) with having the same recording scheduled time interval in storing. The reconstructed stereo images are acquired by capturing the output images with CCD camera at the behind of the analyzer which transforms phase information into brightness information of images. In output plane, we used a LCD shutter that is synchronized to a monitor that display alternate left and right eye images for depth perception. We demonstrated optical experiment which store and reconstruct four stereo images in BaTiO$_3$ repeatedly using the proposed holographic optical memory techniques.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.20-20
• /
• 2017

궤도형 차량의 이동구조는 에너지 소비 측면에서 단점이 있지만 접지압의 감소로 인한 평지 및 야지험지에서도 원활한 주행이 가능한 장점으로 인해 농업분야의 플랫폼에서 많이 사용된다. 곡식을 베는 일과 탈곡하는 일을 한 번에 하는 콤바인도 이러한 무한궤도형 이동구조를 사용한다. 또한 궤도형 차량의 방향전환 및 주행속도 변환은 좌 우 궤도의 회전 속도를 다르게 하여 동시에 제어하기 때문에 정교한 주행 성능을 위해서는 궤도형 차량의 기구학 모델을 고려한 경로 계획이 필요하다. 본 연구에서는 직교형 포장에서 Round harvesting 기법 기반으로 궤도형 차량의 기구학 모델 및 포장정보를 고려한 자율주행 콤바인 경로계획 알고리즘을 개발하고자 하였다. 이를 위해 Labview 기반의 궤도형 차량 시뮬레이션을 구축하여 실제 포장정보를 이용해 생성 된 경로의 적용 가능성을 구명하고자 하였다. 자율주행 콤바인 경로 계획은 콤바인의 길이, 너비, 회전 시 좌 우 궤도의 속도 비, 직진 속도와 회전 속도 비, 회전 각도, 포장의 외부 경계선, 작업 겹침 량, 회경 횟수를 이용하여 좌현 새머리 선회를 포함한 내부 왕복작업 경로를 생성하며 외부 회경 횟수는 2~3회를 가정하였다. 자율주행 시뮬레이션은 차체와 궤도 자체의 미끄러짐과 작동기 지연시간을 단순화 한 궤도형 기구학 모델형태로 구성하였다. 추종 알고리즘은 선견 거리법을 사용하였으며, 측면 변이값과 방향 오차의 선형조합을 이용하여 조향변수를 정의하고 퍼지로직기반으로 좌 우 궤도 속도를 7 단계화하여 조향장치를 모델링하였다. 실험결과 개발 된 경로생성 알고리즘은 실제 취득 된 포장 외부 경계 GPS 위 경도를 이용해 자동으로 생성이 가능하며 간략화 된 콤바인 시뮬레이션에서 직진주행 RMS 위치 오차는 0.05 m, 선회구간에서 직진 구간 진입 시 RMS 위치 오차는 0.11 m, 직진 구간 RMSE 방향 오차는 3.2 deg로 콤바인 예취부 간격인 30 cm보다 작은 위치 오차를 보이며 생성된 경로 전체 추종이 가능함을 나타내었다.