• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.87-94
• /
• 2009

Surfactant-enhanced air sparging (SEAS) was developed to suppress the surface tension of groundwater prior to air sparging resulting in higher air saturation and larger contact area between NAPL and gas during air sparging. Larger contacting interface between NAPL and gas means faster mass transfer of contaminants from NAPL to gas phase. This new technique, however, is limited to relatively volatile contaminants because vaporization is its basic mechanism of mass transfer. In this study, SEAS was tested at an elevated temperature for a semi-volatile n-decane, which is expected not to be a good candidate of SEAS application due to its low vapor pressure at ambient temperature. Three sparging experiments were conducted using 1-dimensional column (5 cm id, 80 cm length) packed with sand; (1) ambient temperature ($23^{\circ}C$), column saturated with distilled water, (2) SEAS at ambient temperature ($23^{\circ}C$), for n-decane contaminated sand, (3) SEAS at elevated temperature ($73^{\circ}C$), for n-decane contaminated sand. Higher air saturation was achieved by SEAS compared to that by air sparging without surfactant application. The n-decane removal efficiency of SEAS at elevated temperature was significantly higher(> 10 times) than that of ambient SEAS. The n-decane concentrations in the gas effluent from column during SEAS at $73^{\circ}C$ are found to be 10 times of those measured at ambient temperature. Thus, SEAS technique can be applied for removal of semi-volatile contaminants provided that an appropriate technique for elevating aquifer temperature is available.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.319-320
• /
• 2003

압전성과 초전성을 나타내는 고분자인 poly(vinylidene fluoride)(PVDF)는 poly(methyl methacrylate), poly(vinyl acetate), 및 Poly(vinyl methyl ketone)(PVMK) 등과 블렌딩하면 혼화성(miscibility)이 있다. 이들 블렌드물들을 용융온도 이상으로 승온시키면 낮은 온도에서는 균일상으로 존재하지만, 온도가 계속 증가하면 상분리되어 LCST(lower critical solution temperature)를 나타낸다[1]. 이러한 승온에 의한 상분리 거동에서 외부전장을 가하면 전기활성 고분자인 PVDF에 영향을 주어 상분리 거동이 변화될 것으로 예산된다. (중략)

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1005-1010
• /
• 1998

실험계획법을 이용하여 유리분말의 소결시 그 기공량에 영향을 미치는 각종 소결조건의 영향을 정량적으로 조사하였다. 본 실험범위내에서 결합제 유리의 총기공량, 개기공량 그미고 폐기공량은 모두 소결온도에 의해 가장 큰 영향을 받고 그 다음으로 소결온도에서의 유지시간에 의해 영향을 받으며 승온속도의 경우 그 영향이 상대적으로 미미함을 확인할 수 있었다. 이러한 결과들로부터 실제공정에 있어 승온속도보다는 다른 소결인자, 특히 소결온도를 조절하는 것이 결합제 유리의 기공량 조절에 가장 중요하리라 판단되며 실험계획법을 이용함으로써 보다 정확한 공전조건을 모색할 수 있었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.212-217
• /
• 1996

방사속도를 500~5,500 m/min까지 변화시켜 만든 Poly(Ethylene 2,6-Naphthalenedicarboxylate)(PEN) 섬유의 Morphology 및 결정화거동을 DSC, XRD 및 Synchrotron Radiation을 이용하여 조사하였다. 밀도 및 복굴절률을 측정하여 방사속도가 증가함에 따라서 as-spun fiber의 구조를 살펴보았다. 또 DSC의 1차 승온과정으로부터 미연신사의 승온결정화 개시온도를 관찰하였으며 ㅡㅇ온결정화과정으로부터 결정화속도를 측정하였다. XRD 및 광가속도기를 이용하여 방사속도에 따른 섬유의 미세구조를 관찰하였으며 온도가 올라감에 따라 결정형태 및 결정화거동이 어떻게 달라지는지 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.239-244
• /
• 1996

We firstly report that formation of $SiO_2$ layer on Si surface can be effectively prevented by flowing the $Si_2H_6$ gas during the heating-up procedure for amorphous Si depositions. In this way, amorphously deposited Si layer onto crystalline Si substrates can be grown epitaxially during the post-deposition heat treatments. The suppression of surface $SiO_2$ can be explained in terms of adsorption of SiHx adspecies, instead of oxygen from residual gases in the reactors, to Si surfaces after desorption of hydrogen from H-passivated Si surfaces. Employing $Si_2H_6$ flowing and soild phase epitaxial growth, high-quality epitaxial Si layer can be obtained at low temperatures below $600^{\circ}C$ without conventional high temperature cleaning procedures.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.45-49
• /
• 2017

Most Waste slurry is produced in the process of silicon manufacturing for semiconductor industry, containing silicon (Si) and silicon carbide (SiC). Waste slurry is simply stored with solidifying by cement or buried. On the other hand, it was suggested in this study that the waste slurry should be used for heating source as supplementary material in steel making process. The waste slurry was refined and pulverized, which was recycled into SiC-based sludge briquette. Chemical composition for SiC-based sludge briquette was analyzed and the feature of heating source was observed in accordance with the injection time and input amount. As a result, SiC-based sludge briquette in terms of low cost and high efficiency had an effect on increasing liquid steel temperature in steel making plants.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.47.2-47.2
• /
• 2010

1980년대 이후로 등장한 Nd-Fe-B 소결자석은 뛰어난 자성특성을 나타내며, 원재료도 풍부하기 때문에 단위 자기 에너지당 가격은 비교적 저가이다. 따라서 대부분의 기존 Sm-Co와 주조 Al-Ni-Co 자석재료를 대체하며 다양한 첨단사업의 핵심소재로 적용되며, 자동차 및 의료기기 등 산업 전반에 사용되고 있다. 이러한 응용 중에서도 향후 녹색성장을 위한 신성장동력 산업인 하이브리드 자동차의 구동 모터로서 사용되는 대표적인 영구자석이다. 현재 개발된 Nd계 영구자석은 큐리온도가 낮고 높은 온도에서 자기적 성능의 열화가 심하게 진행된다는 단점이 있기 새로운 합금 설계 및 공정의 최적화를 통해 보자력을 향상 시킴으로써 사용온도를 $200^{\circ}C$ 정도로 높이는 연구가 활발히 진행되고 있다. 본 연구에서는 일반적인 제조공정을 통해 제조된 소결체의 미세구조에 변화시키기 위하여 약 $10^{-5}$ Torr의 진공분위기에서 $10^{\circ}C/min$의 승온/냉각속도로 $350^{\circ}C$부터 $450^{\circ}C$ 구간에서 2 사이클부터 8 사이클까지 승온과 냉각을 반복하는 열처리를 수행하였다. Nd-Fe-B 소결자석을 $350^{\circ}C{\sim}450^{\circ}C$ 온도구간에서 반복적인 열처리를 수행한 결과 열처리 사이클에 따라 보자력 특성이 다르게 나타내었다. 이에 승온과 냉각을 반복하며 나타난 미세구조의 변화가 자성특성에 어떠한 영향을 미쳤는지에 대해 고찰하였다.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.33-36
• /
• 2005

Effect of heating rate was studied on consolidation of the low-temperature-sinterable PMN-PT-BT powder by varying the heating rate from 5, 10, to $20^{circ}C/min$. Slow rate of $5^{circ}C/min$ showed more homogeneous microstructure than high rate of 10 or $20^{circ}C/min$ due to low PbO (m.p. $886^{circ}C$) evaporation at 850^{circ}C$. It showed sintered density of $7.93 g/cm^{3}$, room temperature dielectric constant of 15300, and dissipation factor of $0.92\%$.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.69-74
• /
• 2013

The study was conducted experimentally on characteristic of thermal decomposition and minimum ignition temperature of magnesium dusts. For this purpose, three different Mg dusts of mean diameter (38, 142, $567{\mu}m$) were used. Experimental investigations were conducted by using TGA(Thermo gravimetric analysis) and MIT(Minimum Ignition Temperature) apparatus made in accordance with IEC 61241-2-1 standard. As the results, temperature of weight gain in Mg dust layers increased with increasing of heating rates in air and, under the same heating rate condition, minimum ignition temperature increased with particle size. Also the MIT of suspended Mg dust clouds tended to increase with increasing of mean diameter.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.78-89
• /
• 2017

Spontaneous combustion propensity of various coals of carbonization grade as a pulverized fuel of coal fired power plant has been tested from an initial temperature of $25^{\circ}C$ to $600^{\circ}C$ by heated in an oven with air to analyze an self oxidation starting temperature. This tests produce a CPT(Cross Point Temperature), IT(Ignition temperature) and CPS(Cross Point Slope) by calculated as the slope of time taken a rapid exothermic oxidation reaction at CPT base. CPS show a carbonization rank dependence, whereby wood pellet has the highest propensity to spontaneous combustion of $20.995^{\circ}C/min$. A subbituminous KIDECO coal shows an CPS values of $15.370^{\circ}C/min$ whereas it of pet coke of the highest carbonization rank has $20.950^{\circ}C/min$. The nature of this trend is most likely a concentration of volatile matter and oxygen functional groups of coal surface that governs the available component for oxidation as well as surface area of fuel char, and constant pressure molar heat.