• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.213-218
• /
• 2011

This study simulates and compares the evacuation time and characteristics according to the living patterns on board a training ship which was launched in Dec. 2005, on the viewpoint of the various activities being possible on board a cruise ship. Based on interviews with personnels on board, 3 living patterns are set as representative living conditions; Pattern A(all personnels are positioned at their cabins), Pattern B(all personnels are positioned at lecture rooms, offices or else), Pattern C(all personnels are positioned at restaurant or cafeteria). The simulation results show that Pattern B is comparatively ideal because the evacuation time is short and there is less delay of personnels' movement on each deck. On the contrary, Pattern C is evaluated as the worst because the average evacuation time took more than 360 seconds and the bottle-neck happened at Upper deck. As a result, this study proposes the needs of various countermeasures against the fire and/or disaster, considering the various living patterns on cruiser(s) and/or passenger ship(s).

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.491-498
• /
• 2010

Wi-Fi based vehicle-to-infrastructure (V2I) communication is an emerging solution to improve the safety, traffic efficiency, and comfort of passengers. However, due to the high mobility of vehicles and the limited coverage of Wi-Fi APs, the V2I system may suffer from frequent handoffs although roadside APs can support cost effective Internet connectivity. Such problem of V2I systems can be overcome with Mobile AP (MAP) platform. The MAPs yield longer service duration by moving along with vehicles, yet they provide a lower link capacities than the roadside APs. In this paper, we propose a new association control mechanism that effectively determines whether the vehicle will select a fixed roadside-AP or a nearby MAP in mobile vehicular network environments. We consider both the achievable link bandwidth and available connection duration as a selection criterion and provide their run-time estimation method. Extensive simulation using real traces show significant performance improvements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3889-3894
• /
• 2012

The platform of railroad station for domestic passenger train has been operated at two categories like the platforms if low level(500mm, mainline) and high level(1,135mm, metropolitan subway line). To operate both metropolitan subway line and mainline railroad safely, it is essential to develop the doorstep equipment of railway vehicle regardless of low and high level platforms. On the other hand, the domestic test standard at durability and reliability of doorstep equipment has not been existed until now. This study aims at the development on doorstep equipment of telescopic sliding type for low and high level platforms. Durability analysis with VPD(Virtual Product Development) techniques are performed and the durability standard & qualification life through the rig test during no failure test time is examined in accordance with reliability qualification test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.817-822
• /
• 2014

Since the opening of the double-track railway for the Gyeongchun local electric train and the semi-high speed train ITX, floating population between Seoul and Chuncheon has rapidly increased. This is attributable to the competitiveness of the railway service in terms of punctuality and safety of operation, mass transportation and low fare. However, many passengers have expressed strong dissatisfaction and displeasure towards the interior noise and its high rate of increase, particularly in tunnel sections. In this study, the interior noise characteristics of Gyeongchun local electric train and ITX were analyzed and compared. Noise levels, frequency spectrum and sound quality indices were compared for the open land, tunnel and bridge. Finally, from the noise levels depending on the location in the vehicle compartment, the noise transmission path was determined and a basic strategy for reducing the interior noise was developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3631-3637
• /
• 2013

Gangway bellows in this study is the double wrinkled neoprene rubber component to accept various deviations between the carriage end parts of the articulated type high speed railway vehicle(HSRV). The fatigue failure of the bellows has a harmful effect on the riding comfort for the passengers with the increase of noise and ringing in the ears due to air-tightness failure during pass through a long tunnel. In this study, to assure the safety of gangway bellows of the HSRV, non-linear analysis of the gangway bellows considering triaxial angular displacement(rolling /yawing/pitching) between the carriage end parts are performed. The non-linear properties of the rubber are determined by uniaxial tension and equi-biaxial tension test. Moreover, from the results of non-linear analysis, the effects of the angular displacements and frictional coefficients are evaluated.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.17-22
• /
• 2012

Installation of screen doors at platform ensures safety of passengers by separating platform from tracks. Besides, it reduces drought and air pressure caused by train conserves heating and cooling energy in the station. In order to guarantee safety of platform screen doors, design considering evaluation of wind pressure requires. In this study, Sosa station, semisealed screen door and EMU are analyzed to estimate the wind pressure of platform screen doors model. Also Sosa station is influenced by climatic condition because it exposed to outside. Therefore, analysis on the wind pressure of platform screen doors is performed under the worst weather condition such as typhoon. The results of analysis, Maximum inside pressure 287 Pa, and consideration of outside pressure as typhoon to the maximum design pressure of 865 Pa 2756.25 Pa conditions approximately 3.1 times the difference can be seen that ensure stability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.857-864
• /
• 2016

Many plane, UAV and drone fly in the sky as development of aviation industry. Plane and UAV fly and drone's propellers rotate so fast. Impact between flying objects which have high velocity threats passengers. Also the impact damages people, building and various property. Plane's operating speed is near sound velocity(340m/s), and propeller's rotating speed is less than that. Until now, impact experiment uses gas gun to get speed and the gun needs large space to entirely air expansion. Electromagnetic launcher, especially railgun, needs smaller space than gas gun to get enough speed about 500m/s. This paper explains electromagnetic launcher's operating principle, shows making electromagnetic launcher design guide line and suggests that it is a better apparatus to get low-high velocity.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.27-36
• /
• 2005

The objective of this study was to analyze the smoke movement and to investigate the effect of exhaust ventilation using by shafts for case of fire in long tunnels. Based on Froude modeling, the 1/50 scaled model tunnel (20 m long) was constructed by acrylic tubes and test were carried out systematically. The results of the shaft height test show that the effect on exhaust ventilation by a shaft delays the propagation time of backlayering, and the temperature decreases as the shaft height increases. If the fire occurs downstream of the shaft, the backlayering develops to get stronger by the shaft exhaust effect and then the propagation of CO and temperature increase along with propagation of CO. That is to say, in the case of fire downstream of the shaft, the shaft has the advantage of smoke exhaust effects, but it might result in a dangerous situation for the escaping passengers due to the more developed backlayering.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.3
• /
• pp.31-38
• /
• 2017

For years, Q1.5 (anthropomorphic test device for 1.5 years old infant) and Q3 (anthropomorphic test device for 3 years old infant) dummy protection has been improved considerably by the effort of EuroNCAP. ISOFIX strength of vehicle structure has increased and many child occupant protection tests have made child restraint system (hereafter CRS) optimized for child safety. However, from 2016, EuroNCAP changed the dummy which is used for the child occupant protection from Q1.5/Q3 to Q6/Q10 and these were also adopted in KNCAP from 2017. Therefore, a new method is required to secure the safety for older children In this research, child dummies were tested by using adult safety systems, and the different results from each adult restraint system were compared. Finally, dummies were tested with the CRS harness belt commonly used for infants, which has yielded significant result. In this research, mid-sized sedan and small SUV were used for the test. The researchers of this paper performed sled tests to correlate between the different adult safety belt system and child injury. Following the sled test, an actual vehicle test was conducted to gather the injury data of Q-dummy with the CRS harness belts. This paper will show the advantages of applying a pre-tensioner in the second row for child protection and the necessity of CRS which has its own harness belts to improve safety for older children.

• Journal of the Society of Disaster Information
• /
• v.12 no.2
• /
• pp.130-135
• /
• 2016

In this paper, the trend of evacuation path providing or guidance systems for safety on disaster situation is analyzed. For trend analysis, 31 papers of domestic and international, 29 patents of domestic, and the finished 9 national funded projects, which have been performed for recent 15 years are analysed. As the results of analysis, the previous researches were performed in the view of the guidance systems, but there is no study that can be used for peoples in dangerous situation until now. Also it has technical limitations in using indoor positioning technology for peoples. In this paper, therefore, we propose to use the indoor positioning technology for developing a novel evacuation guidance system for peoples in dangerous situation. It can be utilized to develop a novel evacuation guidance system which is considered indoor disaster situations.