• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.697-702
• /
• 2010

An enthalpy exchanger in which heat and moisture transfer occur between the indoor and outdoor air operates at various outdoor conditions. In this study, the effect of the outdoor-air temperature and humidity on the performance of an enthalpy exchanger was experimentally investigated. An apparatus was specially-made to accurately measure the incoming and outgoing dry- and wet-bulb air temperatures as well as the flow rates. Tests were conducted in constant-temperature and constant-humidity chambers at different outdoor temperatures and humidities. It is shown that the effectiveness of latent-heat exchange increases as the relative humidity increases; further, this effect exhibited minimal dependence on the absolute humidity. However, the effectiveness of sensible-heat exchange is independent of both temperature and humidity

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.179-184
• /
• 2016

The usual way used by electric power stations to deliver high levels of generated power is via 6.6kV XLPE (or CV) cables. Depending on the manufacturing technique, installation environment, and usage conditions, the deterioration processes of the power cables start from the instant of operation. Cable junctions may break down in three years from the start of operation due to the manufacturing or construction defects. Otherwise they should be in good working order for 20-30 years. When the cable system (the cable itself and cable junctions combined) deteriorates, fire accidents happen due to the dielectric breakdowns. We have invented a device to monitor the deteriorating status of cables at Korean Western Power Co. Ltd. located in Taean, Chungcheongnam-do province. In this paper, we introduce the device hardware. Using the device, we have measured the insulation resistance and humidity in the sheath of the cables. We present, in analysed results, the effect of humidity on insulation resistance in cable sheaths.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.2
• /
• pp.34-38
• /
• 2002

This studies were performed to determine the effects of indoor relative humidity conditions on the growth of Arachniodes aristata and Pyrrosia lingua in native fern and investigate an applicable possibility of indoor plants. The response of Arachniodes aristata and Pyrrosia lingua was evaluated in growth chamber (KG-8407-87) to 3 relative humidity and 3 soils. Relative humidity was applied to 25%, 50%, 90%; soils were prepared based on soil mixture(SM), top field soil(TF), masa soil(MS). Results of experiments are as follows ; 1. Under a low humidity condition, such as 25%, Water contents, chlorophyll content, ornamental value of Arachniodes aristata and Pyrrosia lingua decreased much more a 50-90%. 2. The growth of Arachniodes aristata were best in pots under a soil mixture(SM) but Pyrrosia lingua were field top soil(FT) under 25%. It seemed that Pyrrosia lingua due to tolerance of desiccation more than Arachniodes aristata. Though these studies, coefficient of relative humidity and soil was plays an important role in Arachniodes aristata and Pyrrosia lingua growth in indoor environments.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.169-176
• /
• 2012

Based on our experience in developing resistive humidity sensor, interdigital gold electrodes with different fingers and gaps have been fabricated on a glass epoxy (GE) substrate using screen printing techniques. The basic structure of the electrode consisted of a 3-, 4- and 5-fingers with gaps of 310 and 460 ${\mu}m$. Gold electrode/GE was prepared by first printing silver nanopaste, followed by consecutive electroless plating of Cu, Ni and then Au. Copolymer of [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride (MDBAC) and methyl methacrylate (MMA) was used as a humidity-sensing polyelectrolyte, which was fabricated by a screen printing method on the Au electrode/GE substrate. The flexible humidity sensor showed acceptable linearity between logarithmic impedance and relative humidity in the range of 20-95%RH, low hysteresis of 1.5%RH, good response and recovery time of 75 sec at 1 V, 1 kHz, and $25^{\circ}C$. Electrode construction had a significant influence on the humidity-sensing characteristics of polymeric humidity sensors. The activation energy between electrode and ion conducting polyelectrolyte plays an important role in explaining the differences of humidity sensing characteristics such as temperature dependence, sensitivity, linearity and hysteresis.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.41-51
• /
• 2019

With the aging of the population and the slowdown of the job market, elderly workers make up a large portion of the construction workforce. Also, due to the nature of the construction industry, where outdoor work is frequent, the weather has a more sensitive impact on elderly workers than on younger ones. The study aims to analyze the degree of weather risks exposed to elderly workers in the construction industry using the measure of work loss days. To that end, construction accidents that affected 28,514 elderly workers in seven cities from 2012 to 2016 (a total of 12,789 days) were analyzed to calculate work loss days per different weather factors. The results show that the elderly workers were seriously affected when the temperature was between $-12^{\circ}C$ and $-10^{\circ}C$, humidity between 55% and 60%, precipitation between 128mm and 181mm, and wind speed between 5.5m/s and 6.5m/s, with the highest work loss days. The combined effects between the weather factors were also analyzed to identify the conditiosn that leaded to high work loss days of elderly workers. This study contributes to effective safety management and pleasant working environment between weather factors and shedding light on the relationship between weather factors and work loss days of elderly workers.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.31-38
• /
• 2024

In this study, evaluated the properties of layered silicate-based nanocomposite sensitive film. For the fabrication of nanocomposite materials, we selected organically modified layered silicate materials, specifically Cloisite^® and Bentone^®, which were treated with quaternary ammonium salts. The impedance of the humidity sensors containing organically modified montmorillonite/hectorite clay decreased with increasing relative humidity(RH%). In the case of the Cloisite^® humidity sensor exhibited slightly better impedance linearity and hysteresis compared to the Bentone^® 38 humidity sensor. Additionally the impedance of the sensor with Bentone^® 38 addition was the lowest when compared to the Cloisite^®-modified sensor. Comparing the Cloisite^®-modified sensors individually, we observed different moisture absorption characteristics based on the hydrophilic properties of the organic-treated materials. The response speed of Cloisite^® 93A tended to be slower due to differences in moisture evaporation rates influenced by the hydrophilic organic components. Based on these results, moisture barriers utilizing organically modified layered silicate materials may exhibit slightly lower moisture absorption properties compared to conventional polymer-based moisture barriers. However, their excellent stability, simple processing, and cost-effectiveness make them suitable for humidity sensor applications.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.2
• /
• pp.74-78
• /
• 1986

The experiments were carried out to investigate the effect of humidity on the cocoon quality, and 4, 000 lots of cocoon pruduced fot five years in Chin yang, Ha dong, Keo chang, San chung of Kyeong nam, and Sun san, Sang ju, Young poong, An dong of Kyeong buk were analyzed. The results were summarized as follows ; 1. The reelability ration, the bave length, and raw silk ration were decreased with increasing the humidity in mounting time, and it was remarkably observed when the relative humidity was over 80%. 2. With increasing the reelability ration, the bave length, and raw silk ration were increased, and the longer the bave lenger the bave length was the higher raw silk ration obtained. 3. The average reelability ration for five years in autumn-rearing period was higher than that in spring-rearing period, but the bave length and raw silk ratio was on the contrary from the above. 4. The reelability ration of cocoon produced in the mountainous area was higher than that in the field area but the shorter the bave length, the raw silk ration had no significant difference between those.

• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.1-6
• /
• 2006

In this study we proposed on effect of the photodecomcomposition of coated nanofiber by $Pd/TiO_2$ for the removal of formaldehyde gas as indoor air pollutant. The photocatalytic reactor was setup in the inside of rectangular box (volume 2 l), UV lamp and the coating nanofiber with $Pd/TiO_2$. This study investigated the reaction rate and the adsorption constant of Langmuir-Heinshelwood, conversion of formaldehyde gas on temperature ($40^{\circ}C{\sim}80^{\circ}C$), effect of conversion (%) under different concentration, and effect of conversion (%) with humidity level on added $SO_2$ gas. As results, the rate constant (k) and adsorption constant (ft) were 114.94ppmv/min, $0.0036ppmv^{-1}$, respectively. and the conversion (%) of formaldehyde gas on temperature ($40^{\circ}C{\sim}80^{\circ}C$) was decreased to about 24%, compare with the first conversion (%). In conversion effect of increasing humidity levels, the presence of sulfur dioxide further decreased than without sulfur dioxide. the decreasing reason of conversion with presence sulfur dioxide judged as a cause of interference factor on the decrease of contact chance with photocatalysts.

• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.363-369
• /
• 2007

To understand property of distribution restricted at northern slope of Corylopsis coreana, we investigated process of sedentary formation from seed germination to seedling and its micrometeorological factors in Cheongsogol, Suncheon in Korea. The germination tests were carried out in-situ and manipulated condition, respectively. Air and soil temperatures, relative humidity, soil water contents and PPFD were measured in southern and northern slopes for four seasons. The seeds did not shown difference in germination to azimuth slope. However, seedling in the northern slope should have taken advantage on the sedentary stage of seedlings because there was low temperature and high humidity during the spring. At the southern slope, the seedlings seemed to have a disadvantage on high temperature and low humidity in spring season. Accordingly, the formation of Corylopsis coreana population is influenced by microclimatic factors, especially in low temperature and high humidity at the sedentary stage of the germinated seedlings.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.114-122
• /
• 2014

Currently, global warming has become a serious problem arising from the usage of fossil fuels such as coal and petroleum. Moreover, due to the global warming, heat wave, heavy snow, heavy rain, super typhoon are frequently occurring all over the world. Due to these serious natural disasters, concrete structures and infrastructures are seriously damaged or collapsed. In order to handle these problems, climate change oriented construction technology and codes are necessary at this time. Therefore, in this study, the validity of the present concrete mixture proportions are evaluated considering temperature and humidity change. The specimens cured at various temperature and humidity conditions were tested to obtain their compressive and split tensile strengths at various curing ages. Moreover, performance based evaluation (PBE) method was used to analyze the satisfaction percentage of the concrete cured at various condition. From the probabilistic method of performance evaluation of concrete performance, feasibility and usability can be determined for future concrete mix design.