• Physical Therapy Korea
• /
• v.9 no.4
• /
• pp.45-52
• /
• 2002

이 연구의 목적은 수직착지시 성에 따른 슬관절 가동범위의 차이를 알아보는 것이다. 연구 대상자는 20대의 건강한 성인 48명(남자 25명, 여자 23명)이었다. 연구 대상자에게 40 cm 높이에서 한발로 뛰어내리도록 하고, 2차원 동작측정 기구인 CMS-HS를 이용하여 수직착지시 슬관절의 굴곡각도, 최대 슬관절 굴곡각도, 슬관절의 가동 범위, 각속도를 측정한 후, 남 여 두 집단간의 차이를 알아보았다. 이때 사용한 분석방법은 독립적인 두 표본 t-검정이었으며 축차적(stepwise) 다변량회귀분석을 이용하여 체중과 신장을 조절한 상태에서 남여 간에 차이가 있는지를 분석하였다. 그 결과 수직착지시 슬관절의 굴곡각도에서는 유의한 차이를 보이지 않았으나, 최대 슬관절 굴곡각도, 슬관절의 가동 범위, 각속도에는 유의한 차이가 있었다(p<.05). 체중과 신장이 조절된 조건 하에서 여자는 수직착지시 최대 슬관절의 굴곡각도와 슬관절의 가동범위가 남자보다 작았다. 이러한 결과를 통하여 수직착지시 여자가 남자보다 슬관절 손상의 빈도가 높은 이유 중의 하나는 여자가 슬관절을 덜 굴곡시킴으로 인해 바닥의 충격을 더 많이 받기 때문이라는 가능성을 발견하였다.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.75-81
• /
• 2006

슬관절 전치환술은 관절염이나 사고로 인해 일상적인 활동의 제약을 받는 환자의 슬관절을 인공 관절로 대체함으로써 본래의 기능을 복원하고자 하는 수술이다. 이 수술은 인공 관절의 위치 및 정렬에 매우 민감하게 영향을 받기 때문에 수술이 잘못되는 경우 정렬 이상으로 인한 해리, 삽입물의 파손, 인공 슬관절 주위 골절, 슬개골 탈구, 굴곡 각도의 제한 등의 증상이 발생할 수 있다. 현재의 인공 관절은 임상에 적용되는 다양한 인공 관절 중에서 적당한 형상의 관절을 선택하여 시술되고 있지만 환자의 골 형상에 정확히 일치하는 인공 관절 선택의 어려움 때문에 종종 시술 후 부작용이 발생한다든지 심지어는 재수술을 해야 될 경우도 발생하게 된다. 본 논문은 Mechanical CAD 소프트웨어인 CATIA에서 제공하는 절단, Assembly, Analysis, Kinematic Simulation 기능 등을 이용하여 가상 수술을 수행하는 과정을 보여준다. 슬관절 전치환술 과정을 그대로 재현하여 절단량과 절단각을 결정하고 환자의 골격 형상에 적합한 최적의 인공 관절을 실제 수술 전에 미리 선정할 수 있다. CAD 시스템을 이용함으로써 외과의들이 실제 수술 시에 시행착오법을 통해 인공 관절을 선택하는 과정을 줄이고 수술의 정확도를 높일 수 있다. 향후 ADAMS나 ANSYS와 연계하여 수술 후 동작이나 하중을 분석할 수 있으며, 수술 과정에 대한 교육용으로 활용될 수 있다.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.268-276
• /
• 2010

This study was to investigate the knee joint flexion angle and the foot pressure during climbing with different slope. The 24 healthy subjects were participated. And foot pressure was investigated using Parotec system. The knee joint flexion angle were filmed to using a video camera on each slope($0^{\circ},\;3^{\circ},\;6{\circ},\;9^{\circ}$). And knee joint angle was investigated by Dartfish. The data were analyzed ANOVAs. In conclusion, there was significantly different that knee joint flexion angle related on each slope angle. In foot pressure, there was significantly different in lateral heel area(1 cell), medial midfoot area(9 cell), medial forefoot area(15, 16 cell) of left foot, and in lateral heel area(3 cell) of right foot. There was significantly different of foot pressure in lateral and medial heel when knee joint flexion angle is between $10^{\circ}$ and $20^{\circ}$. There was change of gait cycle according to walking slop angle increasing, and the initial contact phase was shorter, the foot pressure in lateral heel was lower.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.77-83
• /
• 2009

In this study, we investigated relationship of muscular activity in thigh muscle and knee joint angle from bicycle exercise. The EMG signals of 16 persons were measured from rectus femoris and vastus lateralis muscles. The experiment was performed in 5 steps according to saddle distance and 60RPM/200W loads were applied for 1 minute at each step. EMG activation of rectus femoris and vastus lateralis muscles and knee joint angle were recorded using surface EMG and motion analysis system, respectively. Experimental results of inter relationship between EMG activation of thigh muscles and knee joint angle showed high correlation from Step 1. The unified EMG activation of two muscles and knee joint angle showed negative correlation(-0.97).

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.100-104
• /
• 2011

The purpose of this article is to examine correlation between femoral rotational angle and subjective satisfaction of high tibial osteotomy outcome of the range of motion of knee joint. The subjects were 15 patients (6 males, 9 females) with primary osteoarthritis undergoing high tibial osteotomy from June of 2004 to August of 2008. They were CT tested on the knee joint before and after high tibial osteotomy. TEA (Fig. 1) and Akagi's line (Fig. 2) are analyzed as percentages. The Kendall's and Spearman's nonparametric correlation coefficient were used for the statistical tests with 0.5 level of significance. The result reveals that femoral rotational angle correlates with not the range of motion of knee joint but subjective satisfaction of the patients. Therefore, this will enable patients and physicians to have better clinical outcome.

• Proceedings of the Korean Society of Radiological Science
• /
• 1995.10a
• /
• pp.125.1-125.1
• /
• 1995

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.2
• /
• pp.125-128
• /
• 2008

Purpose: The object of this study is to compare the clinical results of noraml saline and Lactated Ringer's solution in the arthroscopic meniscus surgery on the knee. Materials and Methods: The study group included 64 patients who had an medial meniscus tear and received arthroscopic partial medial meniscectomy. The group I was normal saline group, which was used as an irrigation solution during operation. The group II was Lactated Ringer's solution group. We measured the visual analogue scale, painless active knee flexion angle, and the ratio of the knee swelling at postoperative one day for all patients. Results: The visual analogue scale and the painless active knee flexion angle were no significant differences in comparing with normal saline and Lactated Ringer's solution group. The ratio of the knee swelling in Lactated Ringer's solution group was significantly less than those of noraml saline group. Conclusion: Lactated Ringer's solution has an advantage of decreasing the knee swelling in the arthroscopic meniscus surgery on the knee.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.253-260
• /
• 2021

Purpose: The least constrained prosthesis is generally recommended in primary total knee arthroplasty (TKA). Nevertheless, a varus/valgus constrained (VVC) prosthesis should be implanted when a semi-constrained prosthesis is not good for adequate stability, especially in the coronal plane. In domestic situations, however, the VVC prosthesis could not always be prepared for every primary TKA case. Therefore, it is sometimes impractical to use a VVC prosthesis for unsual unstable situations. This study provides information for preparing VVC prostheses in the preoperative planning of primary TKA through an analysis of primary VVC TKA cases. Materials and Methods: This study reviewed 1,797 primary TKAs, performed between May 2003 and February 2016. The reasons for requiring VVC prosthesis and the preoperative conditions in 29 TKAs that underwent primary TKA with a VVC prosthesis were analyzed retrospectively. Results: In primary TKA, 29 cases (1.6%) in 27 patients (6 male and 21 female) used VVC prosthesis. Two patients underwent a VVC prosthesis on both knees. The mean age of the patients was 63.4 years old (34-79 years). The mean flexion contracture was 16.2° (-20°-90°), and the mean angle of great flexion was 111.7° (35°-145°). The situations requiring a VVC prosthesis were severe valgus deformity in 10 knees, knee stiffness requiring extensive soft tissue release in 10 knees, previously injured collateral ligaments in five knees, and distal femoral bone defect due to avascular necrosis in four knees. The mean tibiofemoral angle was 25.7° (21°-43°) in 10 cases with a valgus deformity. The mean flexion contracture was 37.5° (20°-90°), and the mean range of motion was 48.5° (10°-70°) in 10 cases with knee stiffness. Conclusion: The preparation of VVC prosthesis is recommended, even for primary TKA in cases of severe valgus deformity (tibiofemoral angle>20°), stiff knee (the range of motion: less than 70° with more than 20° flexion contracture), and the cases with a previous collateral ligament injury. This information will help in the preparation of adequate TKA prostheses for unusual unstable situations.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.143-147
• /
• 2005

Purpose: In case of anterior cruciate ligament (ACL) reconstruction, graft tendon is generally fixed in tibial tunnel with knee extended. When reconstructing ACL using hamstring tendon, the authors aim to find out the effect of knee joint position during graft fixation on postoperative knee joint stability and range of motion. Materials and Methods: Prospective study was done on patients who have undergone ACL reconstruction using hamstring tendon from May 2002 to January 2003 We used Rigifix system (Mitek Product, Johnson and Johnson, USA) and Intrafix system for fixation. Thirty nine patients received ACL reconstruction during this period. Excluding 2 patients lost in the follow-up, 37 patients were analyzed. The mean follow-up period was 14 months $(13{\sim}25months)$. Knee position was decided alternatively without any bias. Clinical evaluation was based on Lachman test, pivot shift test, Lysholm score, IKDC(international knee documentation committee) assessment and side to side KT-1000 maximal manual arthrometer difference. Results: After the last follow-up, average postoperative Lysholm score was 93.1 poins(65-98points). According to IKDC score, 26 cases were normal, 10 cases were nearly normal, 1 case was abnormal and we had no case of severe abnormality. The mean difference from the normal side was 2.5 mm under maximal manual loading KT-1000 arthrometer. According to postoperative Lachman test, 32 cases were normal,2 cases were grade I and 1 case was grade II. There were 34 cases of normal, 2 cases of grade I and 1 case of grade II. When using maximal manual KT-1000 arthrometer side to side difference, the difference from the normal side while fixing the tibia at 20'knee flexion was 2.3 mm and at full extention the difference was 2.7 mm. The range of motion at postoperative 1 year showed 5 degree flexion contracture in 1 case at 20 degrees knee flexion and 10 degrees of flexion limitation was observed in 2 cases at full extension. Conclusion: When ACL reconstruction using autogenous hamstring tendon, anterior laxity showed no difference in its stability between two groups. Tibial side fixation at full extension may be helpful in preventing flexion contracture due to overconstrained graft tendon.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.503-515
• /
• 2011

We developed a walking-assistance robot for walking rehabilitation and assessed the kinematic characteristics of a prototype. The walking-assistance robot is composed of hip, knee, and ankle joints, and each joint is driven by a motor with a decelerator. The equations of angular displacement while walking were derived by theoretically analyzing human locomotion, and the calculated angular displacements were then applied to the robot controller. The output angular displacement of each joint was measured and compared with its input angular displacement in walking experiments on a treadmill at various walking speeds and strides. The differences between the input and output angular displacements are 5.22% for the hip and 2.97% for the knee joints, and it has been confirmed that the walking-assistance robot works well.