Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.290.1-290.1
/
2014
스핀코팅방법으로 증착된 ZnO 박막의 단계적 후열처리에 따른 구조적, 광학적 특성에 관한 연구를 수행하였다. 일반적으로 ZnO 박막은 한 층을 증착한 후에, 유기물을 제거하기 위하여 전열처리를 수행한다. 본 연구에서는 ZnO 박막을 전열처리와 후열처리를 동시에 단계적으로 수행하였다. X-ray diffractometer, UV-visible spectrometer, photoluminescence를 이용하여 ZnO 박막의 구조적, 광학적 특성을 분석하였다. 모든 시료에서 표면은 직경이 약 20 nm인 둥근 입자들로 이루어져 있었다. X-ray diffraction 패턴은 $31^{\circ}$, $34^{\circ}$, $36^{\circ}$에서 나타났고, 이것은 각각 ZnO의 (100), (002), (101) 방향을 보여준다. 전열처리와 후열처리를 동시에 수행했을 경우, 자유엑시톤 재결합에 의해 3.2 eV에서 좁은 near-band-edge emission 피크가 나타났으며, 투과도 또한 향상되었다.
Thickness effects on the structural and optical properties of ZnO thin films fabricated by spin coating method have been carried out. With increase in the thickness of the ZnO thin films, the width and density of striation shape are increased. The ZnO thin film with thickness of 450 nm has a smooth surface morphology. For the ZnO thin film with a smooth surface, orientation factor ${\alpha}_{(002)}$ is sharply increased and FWHM of (002) diffraction peak is decreased compared to the ZnO thin films with a striation shape surface. Thickness and surface morphology of the ZnO thin films hardly affect the NBE peak position. However, the DLE peak position is blue-shifted as the surface morphology is changed from striation to smooth surface. The PL intensity ratio of the NBE to DLE is increased and the FWHM of NBE peak is decreased as the thickness of the ZnO thin films is increased.
ZnO nano-fibrous thin films with various precursor concentrations ranging from 0.2 to 1.0 mol (M) were grown by spin-coating method and effects of the precursor concentration on surface and optical properties of the ZnO nano-ribrous thin films were investigated by using scanning electron microscopy (SEM) and photoluminescence (PL). ZnO nuclei were formed at the precursor concentration below 0.4 M and the ZnO nano-fibrous thin films were grown at the precursor concentration above 0.6 M. Further increase in the precursor concentration, the thickness of the ZnO nano-fibrous thin films is gradually increased. The intensity and the full-width at half-maximum (FWHM) of the near-band-edge emission (NBE) is increased as the precursor concentration is increased. The deep-level emission (DLE) is red-shifted as the precursor concentration is increased.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.290.2-290.2
/
2014
본 연구에서는 스핀코팅방법으로 증착된 ZnO 박막의 Zn-seed 층 열처리에 따른 구조적 광학적 특성에 관한 연구를 수행하였다. ZnO 박막을 증착하기 전, Quartz 기판에 열증착법으로 Zn-seed층을 증착하였고, furnace에서 300, 350, 400, $450^{\circ}C$의 온도로 1시간 동안 열처리하였다. ZnO 박막은 스핀코팅방법으로 5층을 증착한 후, $600^{\circ}C$에서 1시간 동안 후열처리를 하였다. X-ray diffractometer, UV-visible spectrometer, Photoluminescence를 이용하여 ZnO 박막의 구조적, 광학적 특성을 분석하였다. 모든 ZnO 박막 시료에서 c-축 배향성을 나타내는 강한 ZnO(002)피크와 ZnO(100), ZnO(101) 회절피크가 나타났고, wurtzite 형태의 ZnO 박막이 관찰되었다. Zn-seed층을 $350^{\circ}C$에서 열처리함에 따라 deep-level emission 피크에 대한 near-band-edge emission 피크의 발광세기 비율이 증가하였으나, 온도가 증가함에 따라 점점 감소하였다. 또한, Zn-seed층을 $350^{\circ}C$에서 열처리 하였을 때 가장 높은 광 투과도를 나타내었다.
A polymeric arrayed waveguide grating (AWG) has been proposed and demonstrated by exploiting the nanoimprint method. A PDMS(polydimethylsiloxane) stamp with device patterns engraved was developed out of a master mold made of quartz glass. The device was fabricated by transferring the pattern in the PDMS stamp to a spin-coated polymer film without using any etching process. The device had 8 output channels, while the center wavelengths of each output channel were positioned from 1543.7 nm to 1548.3 nm with the spacing of 0.8 nm. The achieved average channel crosstalk and the 3-dB bandwidth were about 10 dB and 0.8 nm respectively.
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.467-467
/
2013
유기물/무기물 나노복합체는 메모리, 트렌지스터, 발광 다이오드, 태양 전지 소자에 응용이 시도되고 있으나 유기물의 물리적인 특성 때문에 전류 전송 메커니즘 규명에는 충분한 연구가 진행되어 있지 못하다. 유기물/무기물 나노복합소재를 기반으로 차세대 광학소자나 비휘발성 메모리 소자에 대한 연구가 활발히 진행되고 있으며, 기억소자의 성능 향상을 위하여 여러 가지 유기물/무기물 나노복합소재를 사용하여 제작한 유기 쌍안정성 소자가 차세대 플렉서블 비휘발성 기억소자로 대두되고 있다. 유기 쌍안정성 소자는 비휘발성 기억 소자 중에서 구조가 간단하고 제작비용이 저렴하며 유연성을 가지기 때문에 많은 연구가 진행되고 있다. 많은 장점에도 불구하고 유기물에 관한 많은 연구가 이루어지지 않았기 때문에 소자의 동작특성, 재연성 등의 문제점이 있다. 본 연구에서는 유기 쌍 안정성 소자의 전기적 특성을 연구하기 위하여 ZnO 나노입자를 포함한 PMMA 복합층을 사용하여 소자를 제작하고 전기적 특성을 측정하였으며, 유기물/무기물 나노복합소재의 전류 전송 메커니즘을 이론적으로 규명하였다. 트랩밀도 변화가 유기 쌍안정성 소자에 미치는 영향을 연구하기 위하여 C60 층을 삽입하였고, 그 결과 C60이 삽입된 유기 쌍안정성 소자가 향상된 메모리 특성을 보였다. 소자의 제작은 Indium tin oxide가 증착된 유리 기판위에 C60 층을 스핀코팅 방법으로 적층하였다. ZnO 나노 입자와 PMMA를 혼합하여 스핀코팅 방법으로 C60층 위에 박막을 형성한 후, 전극으로 Al을 열증착으로 형성하였다. Space charge limitted current 메커니즘을 이용하여 simulation을 수행하였고 이를 current density - voltage (J-V) 특성과 비교 분석하였다. J-V 특성 결과, simulation결과, 소자의 구조를 통해 유기물/무기물 나노복합소재 기반 메모리 소자의 쓰기, 지우기 및 읽기 동작에 대한 과정을 설명하였다. 또한 C60층을 삽입한 유기물/무기물 나노복합소자를 이용하여 트랩 밀도 변화가 유기 쌍안정성 소자의 전기적 특성에 미치는 영향을 연구하였다.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.184-184
/
2010
Write-once-read-many times (WORM) 메모리 소자는 1회에 한해 쓰기 가능한 저장 장치로서 반영구적인 기록 보존을 필요로 하는 분야에서 널리 사용되는 저항 구조의 비휘발성 메모리 소자이다. 무기물을 사용한 WORM 메모리 소자의 제작과 소자의 전기적 특성에 관한 많은 연구가 활발히 진행되었으나 절연성 고분자인 Polystyrene (PS) 박막에 분산된 ZnO 나노입자를 이용한 무기물/유기물 복합 구조의 WORM 메모리 소자에 관한 연구는 상대적으로 미흡하다. 본 연구에서는 ZnO 나노입자가 분산되어 있는 PS를 스핀코팅 방법으로 박막 형태로 증착하여 WORM 메모리 소자를 제작하고 전기적인 성질을 조사하였다. 소자를 제작하기 위해 ZnO 나노 입자와 PS를 용매인 N,N-디메틸포메미드에 혼합하여 소자를 제작하였다. 그 후 하부 전극인 ITO가 증착되어 있는 유리 기판 위에 ZnO와 PS가 분산되어 있는 고분자 용액을 스핀 코팅 방법으로 도포한 후에 열을 가해 용매를 제거하여 박막을 형성하였다. ZnO 나노입자가 분산되어 있는 PS 박막 위에 Al을 상부 전극으로서 증착하였다. 전압을 인가하여 측정한 전류-전압 특성은 1.5 V에서 소자의 전도도가 크게 향상이 되는 것을 관측하였다. 읽기 전압에서 낮은 전도도(OFF 상태)와 높은 전도도 (ON 상태)의 크기는 $10^3$으로 이며, ON 상태가 된 이후에는 OFF 상태로 전환되지 않는 전형적인 WORM 메모리 소자의 특성이 관측되었다. ZnO 나노 입자가 없이 PS 만으로 박막을 제작한 소자는 쌍안정성 특성이 나타나지 않았다. 따라서 소자에서 전류 쌍안정성으로 나타난 원인은 PS안에 분산되어 있는 ZnO 나노입자에 기인함을 알 수 있었다. 제작된 WORM 메모리 소자의 기억 유지 특성에 대한 결과는 장시간에 걸친 측정에서 ON 전류 및 OFF 전류의 변화가 거의 없었다. 이 실험 결과는 제작된 무기물/유기물 복합 구조를 가진 WORM 메모리 소자는 우수한 기억 특성을 가지고 있으며 반영구적인 메모리 소자로 사용할 수 있음을 제시하고 있다.
The one-step spin coating method is reported as an excellent thin film process because it can be easily used to fabricate high-quality methyl-ammonium lead tri-iodide ($MAPbI_3$) perovskite layers. One of the important things in the one-step spin coating method towards obtaining high-quality $MAPbI_3$ layers is the anti-solvent (AS) engineering, which consists of an one-step deposition of the $MAPbI_3$ film and dripping of the AS. The properties of the $MAPbI_3$ layer were found to be strongly influenced by the amount, dispensing speed, and spraying time of the AS solution. The $MAPbI_3$ solution was prepared by dissolving lead iodide and methyl-ammonium iodide in N,N-dimethylformamide and adding N,N-dimethyl sulfoxide. Diethyl ether (DE) was used for the AS solution. The results indicate that a $MAPbI_3$ layer appropriately sprayed with DE is beneficial for improving film quality and device efficiency because nucleation of $MAPbI_3$ layer is affected by the characteristics of DE, which affect the film's crystallinity, density, and surface morphology. The $MAPbI_3$ layer, which was optimized by using 0.7 mL of DE, a 3.03 mL/sec dispensing speed, and a 7 second time to spray after spinning showed the best efficiency of 13.74%, which was reproducible.
Kim, Young-Min;Yoo, Hyo-Sun;Kang, Il;Kim, Nam-Je;Jang, Gun-Eik;Kweon, Soon-Yong
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2007.06a
/
pp.277-277
/
2007
$(Bi,La)_4Ti_3O_{12}$ (BLT) 물질은 결정 방향에 따른 강한 이방성의 강유전 특성을 나타낸다. 따라서 BLT 박막을 이용하여 FeRAM 소자 등을 제작하기 위해서는 결정의 방향성을 세심하게 제어하는 것이 매우 중요하다. 현재까지 연구된 BLT 박막의 방향성 조절 결과를 보면, BLT 박막을 스핀 코팅 법 (spin coating method)으로 중착하고, 핵생성 열처리 단계를 조절하여 무작위 방향성 (random orientation)을 갖는 박막을 제조하는 방법이 일반적이었다. 그런데 이러한 스핀 코팅법에서의 핵생성 단계의 제어는 공정 조건 확보가 너무 어려운 단점이 있다. 이러한 어려움을 극복할 수 있는 대안은 스퍼터링 증착법 (sputtering deposition method), PLD법 (pulsed laser deposition method) 등과 같은 PVD (physical vapor deposition) 법의 증착방법을 적용하는 것이다. PVD 법으로 증착하는 경우에는 이미 박막 내에 무수한 결정핵이 존재하기 때문에 핵생성 단계가 필요 없게 된다. PVD 증착법의 적용을 위해서는 타겟 (target)의 제조 및 평가 실험이 선행되어야 한다. 그런데 벌크 BLT 재료의 소결공정 조건과 전기적 특성에 관한 연구 결과는 거의 발표 되지 않고 있다. 본 실험에서는 $Bi_2O_3$, $TiO_2$ and $La_2O_3$ 분말을 이용하여 최적의 조성을 구하기 위하여 Bi양을 변화시키며 타겟을 제조 하였다. 혼합된 분말을 하소 후 pallet 형태로 성형하여 소결을 실시하였다. 시편을 1mm 두께로 연마하고, 표면에 silver 전극을 인쇄하여 전기적 특성을 측정하였다. Bi양이 3.28몰 첨가된 조성에서 최대의 잔류분극 (2Pr) 값을 얻었고, 이때의 값은 약 $18{\mu}C/cm^2$ 정도였다. 최적화된 조성 ($Bi_{3.28}La_{0.75}Ti_3O_{12}$)으로 BLT 타겟을 제조하여 PLD법으로 박막을 제조하였다. 박막 제조 시 압력은 $1{\times}10^{-1}\;{\sim}\;1{\times}10^{-4}\;Torr$ 범위에서 변화시켰다. $1{\times}10^{-1}\;Torr$ 압력을 제외하고는 모든 압력에서 BLT 박막이 증착되었다. 중착된 박막을 $650\;{\sim}\;800^{\circ}C$에서 30분간 열처리를 실시하고 전기적 특성을 평가한 결과, $1{\times}10^{-2}\;Torr$에서 증착한 박막에서 양호한 P-V (polarization-voltage) 이력곡선을 얻을 수 있었고, 이때의 잔류분극 (2Pr) 값은 약 $6\;{\mu}C/cm^2$ 이었다. 주사전자현미경 (SEM)을 이용하여 BLT 박막 표면의 미세구조도 관찰하였는데, 스핀코팅 법으로 증착한 경우에 관찰되었던 조대화된 입자들은 관찰되지 않았고, 상당히 양호한 입자 크기 균일도를 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.