• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.723-728
• /
• 2011

Since the performance of a vacuum circuit breaker (VCB) mainly depends on the spring operating mechanism, an analysis of the spring operating mechanism is required in order to improve the design of a VCB. In this study, the static stiffness of the spring was determined by using a material testing machine, and the test results were used to model the spring through computer simulation. The multi-body dynamic model of the spring was established by using the RecurDyn program. The dynamic model was verified by comparing the results of stem displacements and rotating angles of the brake shaft obtained from the simulation and from the experiments. After verification of the dynamic model of VCB, the cam profile of the VCB was optimized through multi-body dynamics simulation in order to improve the performance of the closing mechanism.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.137-142
• /
• 2012

This paper proposes a software development guidance and an evaluation index for the productivity related to Spring 2.5 and EJB 3.0 with same lightweight container architecture. Spring is a known successful open source standard model for lightweight container architecture. EJB in an enterprise environment as a standard framework is most commonly used in production. However, there is no comparison research about the performance of Spring 2.5 and EJB 3.0 Framework with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. In this study, the development platform environment based on the same pilot system Spring 2.5 and EJB 3.0 framework is in the design and implementation. In addition, comparison and standardization of software development productivity assessment is to provide guidance.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.6
• /
• pp.291-297
• /
• 2006

This paper proposes a new Digital Reverberator that models Analog Helical Coil Spring Reverberator for guitar amplifiers. While the conventional digital reverberators are proposed to provide better sound field mainly based on room acoustics, no algorithm or analysis of digital reverberators those model Helical Coil Spring Reverberator was proposed. Considering the fact that approximately $70{\sim}80$ percent of guitar amplifiers are still with Helical Coil Spring Reverberator, research was performed based not on Room Acoustics but on Helical Coil Spring Reverberator itself as an effector. After performing simulations with proposed algorithm, it was confirmed that the Digital Reverberator by proposed algorithm provides perceptually equivalent response to the conventional Analog Helical Coil Spring Reverberators.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.23-29
• /
• 2013

When a human operator interacts with a virtual wall that is modeled as a virtual spring model, the lager the stiffness of the virtual spring is, the more realistic the operator feels that the virtual wall is. In the previous studies, it is shown that the maximum available stiffness of a virtual spring to guarantee the stability can be increased when the first-order-hold method is applied, however the effects of a human impedance on the stability are not considered. This paper presents the effects of a human impedance on stability of haptic system with a virtual spring and a first-order-hold (FOH) method. The human impedance model is modeled as a linear second-order system model. The relations between the maximum available stiffness of a virtual spring and the human impedance such as a mass, a damping and a stiffness are analyzed through the MATLAB simulation. It is shown that the maximum available stiffness is proportional to the square root of the human mass or damping respectively.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.85-92
• /
• 2006

Precast large panel structures have various connection system such as the horizontal slab-to-wall connection, the vertical wall to wall connection, horizontal slab-to-slab connection, etc. Horizontal connection is connected by vertical tie bars, and vertical joint is connected loop bars and shear keys. The basic function is equalized deformations on later forces and the entire wall panel assembly acts as monolithic actions. Under lateral load some slip occurs in almost vertical connections. The shape and detail of precast connections are very important to the monolithic behavior of overall structures. The paper is a study on the design method and new elasto-plastic analysis of the connections by rigid-bodies spring model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.906-911
• /
• 2004

In the development of sheet-handling machinery, it is important to be able to predict the italic and dynamic behavior of the sheets with a high degree of reliability because the sheets are fed and stacked at such a high speed. In this paper, a spring-mass-beam model is introduced. This model consists of rotational springs, shear springs and masses. The formulations for static and dynamic behavior of sheets are introduced. And some simulations are presented for static and dynamic cases.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.822-826
• /
• 2008

A linkage mechanism is a device to convert an input motion into a desired output motion. Traditional linkage mechanism designs are based on trial and error approaches so that size or shape changes of an original mechanism often result in improper results. In order to resolve these problems, an improved automatic mechanism synthesis method that determines the linkage type and dimensions by using an optimization method during the synthesis process has been proposed. For the synthesis, a planar linkage is modeled as a set of rigid blocks connected by zero-length translational springs with variable stiffness. In this study, the sizes of rigid blocks were also treated as design variables for more general linkage synthesis. The values of spring stiffness and the size of rigid block yielding a desired output motion at the end-effecter are found by using an optimization method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.146-153
• /
• 2004

This paper presents a discrete analysis approach to investigate the performance of dual mass flywheel (DMF). In the discrete analysis, arcspring installed between the flywheels is modeled as N- discrete elements. Each element consists of mass, spring and nonlinear friction element. LuGre friction model is used to describe nonlinear friction characteristic. Based on the dynamic models of the DMF, clutch, engine, manual transmission and vehicle, a DMF performance simulator is developed using MATLAB Simulink. Simulation results of the engine speed, driveshaft torque and vehicle velocity are compared with test results. It is found that the discrete DMF model describes the vehicle behavior closely, especially during the clutch actuation period.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.285-287
• /
• 2011

본 논문에서는 지능형 작동기의 효율적 설계와 특성예측을 위하여 기계적 상사 모델을 개발하고, 작동기의 최적작동 조건을 고찰한다. 먼저 지능형 작동기의 기계적 상사는 단순한 2자유도 스프링-메스-뎀퍼 시스템으로 등가 시스템을 구현하였다. 이 때 스프링 강성계수는 시스템의 강성 또는 전기-기계 연성계수 등으로 상사되며, 전기회로 구성품 등은 질량, 뎀퍼 등으로 상사되어진다. 단순화된 기계적 상사모델을 이용하여 작동조건에서의 전기회로 구성품의 튜닝을 최적화 할 수 있다. 특히 작동기의 공진주파수에서의 특성을 고려하여 최적조건을 도출함으로써 그 성능을 극대화 할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.567-568
• /
• 2022

헤어 시뮬레이션은 수많은 가닥으로 구성되어 있으며, 헤어 동역학을 기반으로 계산되기 때문에 일반적으로 계산양이 큰 범주에 속한다. 뿐만 아니라 곱슬머리 형태를 유지하려는 제약은 더 큰 계산을 요구하며, 본 논문에서는 수분에 의해 곱슬머리가 젖었을 때 표현되는 구부러짐과 수축을 모델링 할 수 있는 새로운 알고리즘을 제시한다. 이전 연구에서는 곱슬머리에 대한 헤어 시뮬레이션은 곱슬머리의 회전(Curl)형태를 유지하려는 알고리즘을 제안했지만, 강한 외력에 의한 회전형태만을 유지하려고 했으며, 수분이나 열에 의한 곱슬머리의 상태변화는 고려하지 못했다. 따라서 본 논문에서는 IIR(Infinite impulse response) 필터로 스무딩된 헤어 커브를 따라 회전의 수직 성분을 추출하여 회전의 세로방향 신축성을 제어할 수 있는 방법을 제안한다. 우리의 헤어 모델은 곱슬머리의 회전과 신축성을 제어하기 위해 스프링 동역학을 사용하며, 젖은 헤어의 부분적인 상태 변화에도 안정적으로 표현할 수 있음을 보여준다.