• 대한조선학회논문집
• /
• 제31권2호
• /
• pp.45-56
• /
• 1994

2차원 수중익 주위의 비선형 자유표면 유동을 시간영역에서 시뮬레이션할 수 있는 수치해법이 개발되었다. 본 수치해법은 고차 스펙트럴법과 경계요소법을 조합한 스펙트럴/경계요소법(spectral/boundary-element method)이며, 자유표면은 고차 스펙트럴법에 의해 그리고 수중익과 후류 보오텍스는 경계요소법에 의해 다루어 진다. 본 방법은 자유표면과 수중익의 비선형/비정상 상호작용문제에 폭넓게 적용될 수 있으며, 특히 스펙트럴법을 사용하므로 자유표면 유동을 매우 효율적으로 다룰 수 있다. 적용예로 정지상태에서 출발하여 자유표면 근처에서 균속 전진운동 또는 전진 및 동요운동을 하는 경우가 다루어 졌고, 자유표면파와 동유체력에서의 비선형/비정상 효과들이 보여지고 있다. 비정상해의 특수한 경우로 얻어지는 정상상태의 계산결과들이 다른 이론 또는 실험결과들과 비교되었으며, 좋은 일치를 보이고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.207-212
• /
• 2001

This paper considers a pipeline conveying one-dimensional unsteady flow inside. The dynamics of the fluid-pipe system is represented by two coupled equations of motion for the transverse and axial displacements, which are linearized from a set of partial differential equations which consists of the axial and transverse equations of motion of the pipeline and the equations of momentum and continuity of the internal flow. Because of the complex nature of fluid-pipe interactive mechanism, a very accurate solution method is required to get sufficiently accurate dynamic characteristics of the pipeline. In the literatures, the finite element models have been popularly used for the problems. However, it has been well recognized that finite element method (FEM) may provide poor solutions especially at high frequency. Thus, in this paper, a spectral element model is developed for the pipeline and its accuracy is evaluated by comparing with the solutions by FEM.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.59-72
• /
• 1990

본 논문은 해양 구조물에 대한 확률적 기법을 이용한 스펙트럴 피로해석 방법에 대하여 기술하고 있다. 환경조건 특히 파도 및 관련된 해상상태, 파도 스펙트럼에 대하여 조사하였다. 각종 공식을 이용한 응력 집중계수와 유한요소법을 이용한 응력 집중계수 산출 방법 및 피로수명에 대한 그 영향에 대하여 연구하고, S-N선도의 선택과 해상상태의 간략화 문제등에 관해서도 다루었다. 마지막으로 스펙트럴 피로해석 기법을 응용한 실제 피로해석 사례 연구를 통하여 본 방법의 유용성을 입증하였다.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1653-1660
• /
• 2003

The use of frequency-dependent spectral element matrix (or exact dynamic stiffness matrix) in structural dynamics is known to provide very accurate solutions, while reducing the number of degrees-of-freedom to resolve the computational and cost problems. Thus, in the present paper, the spectral element model is formulated for the axially moving Timoshenko beam under a uniform axial tension. The high accuracy of the present spectral element is then verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension on the vibration characteristics, the dispersion relation, and the stability of a moving Timoshenko beam are investigated, analytically and numerically.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.294-301
• /
• 2003

It is of often important to accurately predict the flow-induced vibration or dynamic instability of a pipeline conveying internal high speed flow in advance, which requires a very accurate solution method. In this study, first the dynamic equations for the axial and transverse vibrations of a pipeline are reduced from a set of pipe-dynamic equations derived in the previous study and then the spectral element model is formulated. The accuracy of the spectral element method (SEM) is then verified by comparing its results with the results obtained by finite element method (FEM). It is shown that the present spectral element model provides very accurate solutions by using an extremely small number of degrees-of-freedom when compared with FEM. The dynamics of a sample pipeline is investigated with varying the axial tension and the speed of internal flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1672-1677
• /
• 2003

In this paper, the spectral element model is derived for the vibration and stability analyses of an axially moving viscoelastic beam subjected to axial tension. The viscoelastic material is represented by using a one-dimensional constitutive equation of hereditary integral type. The accuracy of the present spectral element model is first verified by comparing the eigenvalues obtained by the present spectral element model-based SEM with those obtained by the exact theory and the conventional FEM. The effects of viscoelasticity on the vibration and stability of an example moving viscoelastic beam are numerically investigated.

• 소음진동
• /
• 제6권1호
• /
• pp.83-88
• /
• 1996

The significance of spectral element method is that it can treat the mass and stiffness distribution exactly in contrast to the conventional finite element method, and therefore the dynamic behaviors within each spectral element can be obtained exactly. The present study provides the derivation of the spectral element of a curved beam, while the previous ones presented that of a straight structure. Further, in order to verify the derived spectral element, the natural frequencies of a ring by the spectral element method are compared with those by the analytical method and those by the FEM. From the verification, derived spectral element is admissible. And the dynamic behaviors of curved beam are simulated by using the derived spectral element of a curved beam.

• 한국철도학회논문집
• /
• 제7권3호
• /
• pp.239-244
• /
• 2004

The use of frequency-dependent spectral element matrix (or exact dynamic stiffness matrix) in structural dynamics may provide very accurate solutions, together with drastically reducing the number of degrees of freedom to improve the computation efficiency and cost problems. Thus, this paper develops a spectral element model for the coupled thermoelastic beam which axially moves with constant speed under a uniform tension. The accuracy of the spectral element model is then evaluated by comparing the natural frequencies obtained by the present element model with those obtained by the conventional finite element model.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.113-120
• /
• 1999

In this paper, mathematical formulation of the high-order spectral/boundary-element method is shown. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated in time-domain. Three-dimensional waves generated by a uniformly translating suriace pressure are calculated and discussed. The obtained results are compared with others results, The comparisons show good agreements.

• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.183-190
• /
• 1999

In this paper, a dynamic modeling approach is introduced to identify the dynamic characteristics of the structural/mechanical joints within an one-dimensional structure. A structural joint is represented by the four-pole parameters and the four-pole parameters are determined from the measured frequency response functions by using the spectral element method. As the illustrative examples, a cantilevered beam a clamped-clamped beam, both consist of two beams connected by a bolted joint, are investigated to evaluate the present modeling approach. It is found that the dynamic responses predicted by using the identified for-pole parameters for the bolted joint are well agreed with the measured dynamic responses measured