• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.337-342
• /
• 2016

A spudcan is mounted on the lower leg of the jack-up rig, a device for preventing a rollover of a structure and to support the structure in a stable sea floor. At the time of inserting the surface of the spud can to penetrate when the sand layer is stable and smoothly pulled to the clay layer, and at that time of recovery when uploading the spud can is equipped with a water injection device. In this study, it is significant to optimize the shape of pipelines holes for water injection device and it was set in two kinds of shape, the oval and round. Interpretation of the subject into the site of Gulf of Mexico offshore Wind Turbine Installation Vessels (WTIV) was chosen as a target platform. Using the ANSYS Workbench commercial programs, optimal design was conducted. The results of this study can be applied to the hole-shaped design of various marine structures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.99-105
• /
• 2014

A reference spur suppressed PLL with two-symmetrical loops without changing the bandwidth which is optimized to suppress phase noise and reduce locking time has been designed. The principle of suppressing a reference signal spur is to stabilize the input voltage of voltage controlled oscillator (VCO). The proposed PLL consists of a phase-frequency detector(PFD) which has two outputs, two charge pumps(CP), two loop filters(LF), a divider and a VCO which has two inputs. Simulation results with $0.18{\mu}m$ CMOS process show that the reference spur is approximately suppressed to 1/2 of the reference spur in a conventional PLL. Even though there is a 5% process variation in the magnitude of R and C, the simulation result shows that the reference spur is still suppressed to 1/2 of the reference spur in a conventional PLL. The power consumption is 6.3mW at the power supply of 1.8V.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.94.1-94.1
• /
• 2010

RF 마크네트론 스퍼트를 이용하여 유리 기판 위에 태양전지 투명전극용 Al 도핑된 ZnO(AZO)를 증착하였다. Si 박막 태양전지용 투명전극으로 사용될 AZO의 광학 및 구조적 특성을 향상시키기 위해서 증착온도 및 Ar 가스의 유량비를 조절하여 증착하였다. 상온에서 500도 범위 내에서 증착하였고, 10에서 40 sccm의 범위 내에서 Ar의 유량을 변화시켰다. 증착된 AZO의 광학적 특성은 UV-spectrometer를 이용하여 측정하였고, 구조적 특성은 XRD를 이용하여 측정하였다. 가스의 유량비에 따라 광학 및 구조적 특성의 의존성을 나타내고, 가스 유량비를 조절하여 태양전지용 투명전극의 광학 및 구조적 특성의 최적화를 이룰 수 있다.

• The Journal of Korean Academy of Sensory Integration
• /
• v.6 no.1
• /
• pp.35-46
• /
• 2008

Objective : This study verifies the effects of sensory integrative (SI) therapy on vestibular- and proprioceptive sensory (BPS) processing ability of a child with Asperger Syndrome (AS). Method : A boy who is 11 years and 2 months old took the Functional Independence Measure for Children (Wee-FIM), Canadian Occupational Performance Measure (COPM), Short Sensory Profile, Bruininks-Oserestky Test of Motor Proficiency-2 (BOT-2), and Test of Playfulness (ToP) for the baseline. The child participated in 3 evaluation sessions and 8 therapy sessions based on the AB research design. Duration of each session is 50 min and the therapy session is divided into 40 minutes for treatment and 10 minutes for evaluation. Since the vestibular sense and proprioception build up one's ability of postural control, several tests were employed to evaluate the child' postural control as outcome measure; distance from front leg of chair to heel of the child with sitting (C-H distance), angle between trunk and thigh (hip joint angle) with sitting, and the 'prone-extension posture' which is a subtest of Clinical Observation of Motor and Postural Skill (COMPS) to examine postural control embodied with integration of reflex and BPS processing. Result : During the therapy, average data of the C-H distance is decreased from 27.33cm to 11.69cm, average data of the hip joint angle is also decreased from $43.3^{\circ}$ to $20^{\circ}$, and average time for the prone-extension posture is increased from 13.15seconds to 24.84seconds. Conclusion : This result indicates that the ability to postural control in sitting and to maintain the prone-extension posture can be improved by sensory integrative therapy, with enhanced BPS processing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.847-853
• /
• 2011

In this study, a hybrid powder-extrusion process involving the control of temperature dwelling time for improving the formability of Zn-22Al powder was developed and the effect of dwelling time on the mechanical properties of a spur gear with a pitch circle having a diameter of 1.8 mm was investigated. General extrusion experiments were carried out at different temperatures such as 290, 300, and $310^{\circ}C$. Spur gears with good qualities and without any surface defects were obtained in the case of extrusion temperature of $310^{\circ}C$ and ball-milling duration of 32 h. The Vickers hardness distribution was non-uniform, and after the sintering process, an internal crack was generated because of the different deformation energy between gear central part and teeth. To overcome the abovementioned problems, research on controlling the dwelling time of the extrusion temperature in the powder-extrusion process was carried out. Good-quality spur gears were obtained when the dwelling time was 15 min.

• Journal of Korean Philosophical Society
• /
• v.126
• /
• pp.345-376
• /
• 2013

Der vorliegende Beitrag zielt darauf ab, Nietzsches Einstellung zum Christentum zu $er{\ddot{o}}rtern$. Nietzsche gilt als einer der eindeutigsten Kritiker des Christentums in der $abendl{\ddot{a}}ndischen$ Geistesgeschichte. $F{\ddot{u}}r$ Nietzsche ist das Christentum nicht nur eine Religion, sondern auch eine Wertvorstellung, an der sich die $europ{\ddot{a}}ische$ Kultur orientiert hat. Nietzsche setzt sich die $vollst{\ddot{a}}ndig$ ${\ddot{U}}berwindung$ des Christentums zum Ziel, weil es der entscheidende Grund des Untergangs der $europ{\ddot{a}}ische$ Kultur ist. Ist Nietzsche Antichrist? Die Antwort auf die Frage ist sehr umstritten, denn Nietzsches Einstellung zum Christentum ist ambivalent. Freilich fokussiert Nietzsche seine Kritik nicht auf den Religionsstifter selbst, sondern auf den Apostel Paulus. In den verschiedenen Phasen seines Werkes erscheint Jesus in unterschiedlicher Weise. Er lehnt die Person Jesus nicht $grunds{\ddot{a}}tzlich$ ab, negiert aber den 'Typus' Jesus, z. B. als 'Idiot' und 'decadent'. Paulus ist der entscheidende Antipode $f{\ddot{u}}r$ Nietzsche. Der Apostel Paulus ist der wahre $Begr{\ddot{u}}nder$ des Christentums und der Sklavenmoral der Christen. Der vorliegende Aufsatz gibt Antworten auf die Fragen: Erstens, was das Christentum $f{\ddot{u}}r$ Nietzsche ist. Zweitens, wie Karl Jaspers Nietzsches $Verh{\ddot{a}}ltnis$ zu Jesus und Paulus besonders in Nietzsche und das Christentum beurteilt. Drittens, welches Problem die Interpretation von Jaspers besonders in Bezug auf seinen Begriff des 'Umgreifenden' hat.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.1
• /
• pp.33-40
• /
• 1994

금속박막 증착 전 Ar 이온을 이용한 폴리이미드 표면의 RF 스퍼터링 처리가 Cr/폴 리이미드 계면의 접착력과 반응성에 미치는 영향에 대하여 90。 peel test, TEM, FTIR 및 XPS를 사용하여 연구하였다. Cr/폴리이미드 계면의 접착력은 촐리이미드 표면은 RF 스퍼 터링 처리에 의해 1g/mm에서 100g/mm로 현저히 증가하였다. 표면 비저항 측정과 FTIR 및 XPS 분석결과 RF 스퍼터링 처리에 의한 Cr/폴리이미드 계면의 접착력 증가는 RF 스퍼 터링에 의한 폴리이미드 표면의 chemical modification 에 의해 증착되는 Cr과 계면 반응성 이 향상되는데 기인하는 것임을 밝혔다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.170-170
• /
• 2009

DC 마그네트론 스퍼터링법에 의하여 ITO, ITO:Yb 및 ITO:Sm의 조성을 가지는 각각의 타겟을 사용하여 상온에서 박막을 증착한 후 후 열처리를 실시하였다. Yb 및 Sm이 첨가된 타겟을 사용하여 증착한 박막의 경우, 미세구조 및 전기적 특성, 표면거칠기 등은 ITO 박막내의 불순물의 함량에 크게 의존한다는 것을 알 수 있었다. 이것은 새로운 불순물의 첨가에 따른 ITO 박막의 결정성의 저하에 기인한다고 생각된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.134-135
• /
• 2007

ITO는 평판디스플레이에서 사용되어지고 있는 대표적인 실용화 투명전극재료로서, ITO박막은 DC 마그네트론 스퍼터링법에 의해 생산되어지고 있다. 이러한 마그네트론 스퍼터링법을 사용할 경우, 캐소드 자장의 강도나 모양은 박막의 물성에 많은 영향을 미치게 된다. 본 논문에서는 외장형 마그네트론과 내장형 마그네트론을 장착한 캐소드를 사용하여 증착한 ITO박막에 대하여 열처리에 따른 박막의 물성변화에 대하여 연구하였다.

• The Korea Swine Journal
• /
• v.18 no.10 s.206
• /
• pp.176-179
• /
• 1996