• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.135-140
• /
• 2008

In this paper, the spiral antenna with the center frequencies of 315MHz, 433MHz, and 447MHz for RKE system of a vehicle is designed on PCB. The antenna is microstrip line-fed, and applied PIFA concept near the feeding part to easily tune center frequency and input impedance. The PIFA-type spiral antenna with the size of $30mm{\times}20mm$ is designed on printed PCB by considering the effect of circuits and components on PCB, ECU case and vehicle body. Also chip inductor inserted dual-band spiral antenna of 315MHz and 447MHz is designed. We found that the antenna designed on PCB satisfied the antenna specifications through measurement and field test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.857-871
• /
• 1994

In this paper, six kinds of spiral antenna, a combination of two types of spiral arm-width and three types of spiral curvature are analyzed by using moment method. Dividing spiral arms into N sections, the current distribution is calculated by Galerkin`s method. The radiation pattern and the antenna gain are derived from antenna currents. All os the six spiral antenna have amni-dirctional and wide-band characteristics, although the antenna gain changes within +_ 5dB bound for operating range(600MHz-2GHz). The variation of antenna`s gain is caused by the return loss in connection the Balun to the antenna. Simulation and experimental results on the radiation pattern also show spiral antennas have omni-directional and wide-band characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.653-660
• /
• 2004

This paper presents monopole antenna with electromagnetically coupled feed and its equivalent circuit model. The proposed structure is consists of a rectangular disk-loaded monopole and a probe with rectangular spiral strip line feed. The rectangular disk-loaded monopole is represented by parallel RLC resonant circuit and the probe with rectangular spiral strip line feed is represented by series RLC resonant circuit. Therefore broad bandwidth can be achieved through electromagnetic coupling between these structures that generate two resonances within close frequency range. The antenna with electrical dimensions of only 0.075λ$\sub$0/${\times}$0.075λ$\sub$0/${\times}$0.075λ$\sub$0/ has 16.5 % fractional bandwidth for VSWR$\leq$2 at a center frequency of 2.038GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.5
• /
• pp.16-22
• /
• 2001

A novel microstrip circular slot antenna fed by a spiral line is presented in this paper. This antenna is a planar equivalent structure of an eccentric spiral antenna generates a circularly-polarized wave. We have investigated the input impedance and radiation characteristics of this antenna by using an EM (electromagnetic) simulator, and obtained a design method [or optimum structure. The main characteristic of the antenna is that the main beam direction is off-normal to the antenna plane and moves linearly into ${\theta }$ and ${\phi }$ direction as the frequency increases. This feature allows one to predict the main beam direction easily for a given operating frequency. This antenna has axial ratio lower than 3 dB in the direction of main beam over one octave bandwidth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.77-84
• /
• 2003

This paper presents a multi-functional microstrip spital antenna that operates in dual frequency bands. Several types of beam shape can be selected by controlling the phase difference of two spiral arms with the phase shifters located on each feed line. It has a normal beam at the lower frequency band, and four different patterns at the higher frequency band: normal beam, conical beam and two types of tilted beam. The antenna exhibits more than 10% of bandwidth at each band. The antenna is fabricated with conductor backed electromagnetic absorber in order to attain unidirectional radiation pattern and confirmed the multi-functionality by measurements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.851-857
• /
• 2002

A two-arm microstrip spiral antenna with a circular aperture on the ground plane that generates a circularly polarized conical beam is presented in this paper. We obtained circularly polarized conical beam by using two spirals that are excited in-phase from the microstrip feed lines. The main beam directions of the conical beam from the broadside are approximately 40$^{\circ}$ in the range from 5 GHz to 6.5 GHz, and 58$^{\circ}$ from 9 GHz to 11 GHz. Since the proposed antenna has omni-directional conical beam pattern, it is suitable for use in mobile communication systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.35-40
• /
• 2022

This paper proposes an antenna that is located outside the PCB substrate of an electronic product to enable wireless communication in the ISM band. The PCB designed the T-shaped OPEN-STUB power supply line to be miniaturized so that it does not interfere with parts or interfere with design. The characteristics of the antenna were confirmed in the 2.4GHz and 5.8GHz bands using a T-shaped stub feeder and a spiral structure. The size of the antenna is 5mm in width × 6.5mm in length, and the thickness of the PCB is 1.2T. As a result of measurement of the manufactured antenna, it was possible to obtain a return loss of -10dB or more at 2.4GHz and 5.8GHz. In the E-plane, the gain was -4.45 dBi, and in the H-plane, the gain was -1.05 dBi. Therefore, the proposed small antenna for wireless communication showed excellent performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2325-2331
• /
• 2012

Planar square-spiral antenna using a strip conductor is proposed and analyzed for RFID system in UHF band operating from 860MHz to 960MHz. By varying the length of common line, detached distance, strip line-space, strip line-width and the number of spiral turn, the optimized antenna are designed and fabricated in compact size without a matching-stub between the input port of the proposed antenna and RFID tag chip. From the optimized results, the frequency bandwidth in VSWR<2 has covered 100MHz in the RFID UHF band. The antenna gain has obtained 3.5dBi at the center frequency of 910MHz and the desired beam pattern has shown directional pattern on elevation and azimuth angle. Therefore, the proposed antenna is suitable for practical RFID applications requiring various tag chips with the specific input impedance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.933-939
• /
• 2010

In this paper, modified spiral monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. To control the frequency ratio of the antenna for dual band operation freely, distance between inner lines of the spiral is diversified by using the different current distribution between basic resonance frequency of spiral monopole antenna and harmonic resonance frequency$(3\lambda_H/4)$. And also the branch line is inserted. Bandwidth(-10 dB) of the antenna is measured 140 MHz(1.47~1.61 GHz) in basic resonance frequency and 420 MHz(2.29~2.71 GHz) in harmonic resonance frequency$(3\lambda_H/4)$. The peak antenna gains are measured 2.825 dBi in GPS(1.57 GHz), and 3.65 dBi in WiBro(2.35 GHz), and 4.564 dBi in WLAN(2.44 GHz).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.625-630
• /
• 2011

In this paper, spiral meander monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. Spiral(positive coupling) mounted end of monopole(small current) and meander mounted fed of monopole(big current) for reduce frequency ratio. Bandwidth(-10 dB) of the antenna is measured 130 MHz(1.49~1.62 GHz) in basic resonance frequency and 330 MHz(2.29~2.62 GHz) in harmonic resonance frequency($3{\lambda}_H/4$). The peak antenna gains are measured 2.86 dBi in GPS(1.57 GHz), and 3.49 dBi in WiBro(2.35 GHz), and 3.71 dBi in WLAN(2.44 GHz).