• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.287-293
• /
• 2006

Diamond-like carbon (DLC) film was deposited using benzene $(C_6H_6)$ by r. f-plasma assisted chemical vapor deposition. The tribological properties of the DLC film were tested by rotating ball-on-disc type tribometer isolated by a chamber. The tribological test was performed in air environment of relative humidity ranging from 0 to 90% in order to observe the tribological behavior of the DLC film with the change of humidity. We used steel ball and DLC coated steel ball to investigate the effect of the counterface material. Using steel ball, the friction coefficient of DLC film increased from 0.025 to 0.2 as the humidity increased from 0% to 90%. In case of DLC coated steel ball which didn't form the Fe-rich debris, the friction coefficient showed much lower dependence of humidity as 0.08 in relative humidity 90%. We confirmed that the high humidity dependence of the friction coefficient using steel ball resulted from the increase of debris size with humidity and the formation of Fe-rich debris by the wear of steel ball. And the friction coefficient was immediately dropped when the relative humidity changed from 90% to 0% during test using steel ball. From this result, we confirmed that the effect of the Fe-rich debris on the friction coefficient was that Fe element in debris formed the highly sensitive graphitic transfer layer to humidity.

• Composites Research
• /
• v.34 no.1
• /
• pp.35-46
• /
• 2021

This paper aims to reduce weight by replacing the reinforcements of the B-pillar used in vehicles with CFRP(Carbon Fiber Reinforced Plastics) and GFRP(Glass Fiber Reinforced Plastics) from the existing steel materials. For this, it is necessary to secure structural stability that can replace the existing B-pillar while reducing the weight. Existing B-pillar are composed of steel reinforcements of various shapes, including a steel outer. Among these steel reinforcements, two steel reinforcements are to be replaced with composite materials. Each steel reinforcement is manufactured separately and bonded to the B-pillar outer by welding. However, the composite reinforcements presented in this paper are manufactured at once through compression and injection processes using patch-type CFRP and rib-structured GFRP. CFRP is attached to the high-strength part of the B-pillar to resist side loads, and the GFRP ribs are designed to resist torsion and side loads through a topology optimization technique. Through structural analysis, the designed composite B-pillar was compared with the existing B-pillar, and the weight reduction ratio was calculated.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.89-95
• /
• 1997

In line with the worldwide trend toward the protection of natural environment and economic concerns, the steel framed house is suggested for the next industrialized generatiov. In Korea, untrustworthiness of concrete structured apartment has led to the development of alternative building material and technology. POSCO has constructed the model steel house to assess the marketability of steel framed house in Korea. To collect basic data required to design the steel framed house suitable to Korean life pattern and housing needs, professional evaluation of model steel house was conducted. The goal of this study is to propose alternative plan and ideas on the interior space planning based upon the evaluation from women housing professionals. Our analysis reveals that the habitability of steel house is equal or superior to that of traditional houses. But in the interiior sapce planning, the certain aspects of steel houses is not suitable to Korean likfe style: the lack of storage space and utility space, inflexibility of plav. We conclude that given its cost efficiency and environmental concern, steel house has potential to take an important part in future Korean housing.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.286-291
• /
• 2007

We theoretically investigated the far-field radiation pattern of epi-signal from a polystyrene sphere in coherent anti-Stokes Raman scattering (CARS) microscopy with an objective lens of high numerical aperture. We calculated the field distribution of the incident laser beams under the tight-focusing condition and the far-field radiation pattern through coherent addition of radiation from the nonlinear polarizations (Hertzian dipoles) as the origin of CARS signal generation. The epi-radiation patterns for polystyrene spheres of different diameters are calculated, and the pattern of a sphere is also compared with that of a shell fer a diameter of 1100 nm. We finally show how the radiation pattern of the polystyrene sphere changes as the center of the sphere shifts from the focus of the beam.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.25-31
• /
• 2011

In this paper, we propose virtual building construction plans. For this, we compose the construction materials with components and assemble components in pattern. When we change assembled constructions, we can design the building efficiently with patterns if the parts are selected. Also through information analysis of material components or patterns, we can provide information which is necessary to a reconstruction to the designer. Using steal house method, the assembly functions were comprised of a wall, a room, a window, a door, roof etc. Also We explained the materials automatic extraction method which applies steal house.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.975-980
• /
• 2000

스테인레스 스틸 기판 위에 Pb($Zr_{0.45}$ $Ti_{0.55}$) $O_3$후막을 졸-겔 스핀 코팅법으로 제조하였다. 스테인레스 스틸은 그 자체로 좋은 도체이지만 PZT 후막의 강유전 특성을 개선하고자 Ru $O_2$박막을 중간층 겸 하부전극으로 사용하였다. PZT 전구체 용액을 코팅하고 급속 열처리하였을 때 5$50^{\circ}C$ 이하에서 pyrochlore 상이 먼저 나타났고 이 transient 상은 61$0^{\circ}C$에서 모두 perovskite 상으로 변화하였다. $600^{\circ}C$에서 열처리된 PZT 후막은 잔존하는 pyrochlore로 인해 걸어준 전기장에 무관하게 5-7$\mu$C/$ extrm{cm}^2$의 낮은 $P_{r}$값을 나타내었으나 61$0^{\circ}C$ 이상에서 열처리된 시편들은 모두 25$\mu$C/$\textrm{cm}^2$ 이상의 잔류분극을 가지고 있었다. 또한 Ru $O_2$중간층이 PZT의 강유전성에 미치는 영향을 조사하였을 때 잔류분극 값은 거의 영향을 받지 않았으나 항전계 값은 상당한 영향을 받았다. 즉 100nm 두께의 Ru $O_2$박막을 중간층으로 사용할 경우 중간층 없이 직접 스테인레스 스틸 위에 코팅할 때에 비해 항전계 값을 45% 가량 줄일 수 있었다.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.563-571
• /
• 2006

Vapor grown carbon fiber (VGCF) nano-materials such as carbon nanotubes and carbon nanofibers were directly grown on the surface of the stainless steel mesh pre-treated by reduction. The reduction of the stainless steel mesh by hydrogen formed small catalytic particles and large particles with bi-modal distribution on the metal surface. When the VGCFs were synthesized on the reduced mesh, carbon nanotubes (CNTs) were dominantly grown from the small catalytic particles without supplying hydrogen gas. However, carbon nanofibers (CNFs) were dominantly grown from the large catalytic particles with hydrogen.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.1-10
• /
• 2011

The ultimate goal of architecture is to construct a building through design and supervision. According to this circumstance, architectural education divided into two part ; design and construction. However, these two processes have to be one program for better education. In this aspect, steel housing program could be a desirable one because of its structural(bearing wall) system and relative short construction schedule. In KUT architectural program, steel housing has been one of the most effective and important for about ten years. In this research, the contents(s/w) and running process of this program and practice lab(h/w) will be introduced with detail. And this study could be a good guideline for a better combination program with theory and practice in architectural engineering field.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2229-2237
• /
• 2000

This paper intends to improve the problems of the slack stealing algorithm scheduling for periodic tasks with fixed priority and aperiodic tasks which occur dynamically. The Slack stealing algorithm reduces unnecessary waiting time by making the service possible immediately when the slack stealing server gives suitable priority to aperiodic tasks according to the status of aperiodic tasks arrivals at runtime. But no performs the slack stealing, we must calculate execution time of periodic tasks till the point of random. And, execution time of periodic tasks is being repeatedly every hours while the slack algorithm is applied. We show time complexity hen is used as to O(n) if the nubmer of tasks which is applied to the calculation is n. In this appear, due to stored in tables slack times and the execution times of the scheduled periodic tasks, the complexity of aperiodic tasks which is occurring dynamically reduced to O(log n) and improves the responses times. We prove the algorithm proposed in this paper through the simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.905-910
• /
• 2014

The steel grating discussed in this study is a drain cover that enhances the rigidity of the steel frame using an inclined inflow tract for wastewater, facilitates smooth drainage, and prevents the escape of bad smell from the drain. Recently, the urban problem of bad smell in sewerage lines has been hindering the improvement of living standards. Moreover, the frequent failure of existing products deters bad smell prevention measures and results in administrative power and budget wastage. The pressure to reduce budgets propels the increased demand for functional steel grating. Thus, this study focused on optimizing the design parameters of a steel grating by simultaneously considering its rigidity and drainage efficiency.