• Korean Journal of Microbiology
• /
• v.51 no.2
• /
• pp.126-132
• /
• 2015

Three different methods (simple washing of plastic and pulp sample, washing after direct heating of the diapers, and the heating after washing of plastic and pulp sample) were carried out to decrease total coliforms and heterotrophic plate count (HPC) in the diaper's plastic and pulp. Plastic and pulp samples were obtained from diaper by treatment with 10% $CaCl_2$ and 4% sea salt water, dilution with 1,000 ml tap water, and draining by using sieves. Three times washing was the most appropriate for the reduction of microorganisms in plastic and pulp. By three times washing, the number of total coliforms in the plastic and pulp samples showed 92.8% and 99.8% of decrease, respectively, and the number of HPC showed 97.3% of decrease in the plastic and 98.5% of decrease in the pulp. The washing after direct heating of the fecal contaminated diapers was not effective because HPC in the plastic and pulp samples were still detected about 2-3 log CFU/g in the plastic and 1-2 log CFU/g in the pulp, respectively, even after heating at $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$ for 12 h. Meanwhile, total coliforms and HPC were completely sterilized at $80^{\circ}C$ for 4 h by heating after washing of plastic and pulp samples, suggesting that this method was the most appropriate method for the reduction of microorganisms in plastic and pulp obtained from fecal contaminated diapers.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.67.1-67.1
• /
• 2005

• Journal of the KSME
• /
• v.52 no.1
• /
• pp.45-49
• /
• 2012

플라스틱과 같은 고분자 재료는 특유의 부정형 분자 구조 때문에 기온의 변화 등의 외부적 요인에 의하여 초기 설계에 사용된 고유의 기계적 물성이 변화함에 따라 형태의 변형이 발생하여 부품으로 쓰였을 때 체결부가 느슨해지거나 마찰을 유발하여 이음, 즉 BSR을 발생시킨다. 이 글에서는 고분자 재료의 물리적 거동 특성 및 BSR 발생메커니즘에 어떤 영향을 미치는지에 대하여 기술하고자 한다.

• The Microorganisms and Industry
• /
• v.18 no.1
• /
• pp.23-27
• /
• 1992

전분이 함유된 플ㄹ스틱 및 광분해성 플라스틱은 제외하고 순수하게 생분해되는 생분해성 고분자의 시장은 세계적으로 년간 140만톤으로 추정되고 있다. 이 중에서 생물공학과 직접적으로 관계가 있는 것은 polylactide계 polymer의 원료가 되는 lactic acid, pullulan과 같은 polysaccharide 그리고 PHA와 같은 polyester등으로서 본고에서는 PHA(polyhydroxyalkanoate)를 중심으로 생산공정이 어떻게 개발되어 오고 있는가 간단히 고찰하고자 한다. 이러한 생산공정의 원리는 pullulan 및 xanthan gum과 같은 타 생물고분자의 경우에도 유사하게 적용될 수 있다.

• The monthly packaging world
• /
• s.6
• /
• pp.55-56
• /
• 1993

폐플라스틱으로 인한 지구환경 오염 문제의 해결책으로 분해성 플라스틱 개발이 유력한 대안으로 제시돼, 지난 1980년대 중반 이후 이러한 분해성 플라스틱 개발이 활발히 진행되어 왔다. 그 결과 현재 많은 제품이 개발되어 이용되고 있지만, 그러나 아직까지 분해성 플라스틱에 대한 정의가 명확하지 않고 평가방법도 정립되어 있지 않은 실정이다. 그밖에 경제성이라든가 물성, 분해속도 등 여러 조건을 충족시켜 범용화 할 수 있는 분해성 플라스틱을 보기까지는 앞으로도

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.235-246
• /
• 2007

The study aims to design an integrated remote controller, which is an increasingly essential device in the home, for more convenient use. For this purpose, an alternative user interface (UI) design was developed by applying the user interface system of a popular existing product to an integrated remote control highly usable and easy to learn for domestic use, and the usability was evaluated. For the existing popular product, a cellular phone was selected, the operation method of which is similar to the stick-type integrated remote control for which the user interface design was to be developed in this research. Common characteristics of the UI of the selected cellular phone were derived and the characteristics were applied as much as possible to the design of a stick-type integrated remote control. The prototype of the alternative design, which was simulated with Flash, went through two pilot tests for further improvement before making the final experimental prototype. Based on the results, prototype buttons that improved the feeling of use in terms of physical operation and feedback were made, and the usability of the new UI design of a stick-type integrated remote control for domestic use were evaluated with 41 university students in their 20s. According to the results of the experiment, the newly designed stick-type integrated remote control based on the UI of an existing product may improve the usability of remote controls and the outcome of this study is expected to provide a good model for R&D of new UI designs of stick-type integrated remote controls for domestic use.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.15-26
• /
• 2020

In recent years, there is an increasing interest in environmental friendly treatment of waste-plastics in terms of the generation of microplastics. Accordingly, the recycling of waste-plastics is very important because it provides advantages of volume reduction, mitigation of carbon dioxide emission, and reproduction of value-added products. In particular, in order to recycle the eco-friendly waste-plastics, it is necessary to use a physical separation methods, and among them, flotation separation, which can separate material (i.e., polymer component) in waste-plastics is well known as a very effective separation method in terms of material recycle. Therefore, in this review, the research trend of flotation separation for effective separation of mixture waste-plastics was investigated. In addition, through the reported research results, approaches to use as new functional materials from polymers, which are raw materials for waste-plastics, are summarized.

• Journal of Life Science
• /
• v.34 no.5
• /
• pp.320-332
• /
• 2024

The aims of this study were to compare the differences in hemodynamics between cigarette smoking and using heated tobacco products (HTPs) and to determine the acute effects of using HTPs on cardiac autonomic regulation. Another goal was to examine the acute cardiac autonomic responses when using different tobacco sticks in HTPs. Sixteen healthy male smokers completed an open-label, randomized, crossover trial consisting of non-smoking (NS), cigarette smoking, and the use of two different HTPs (IQOS with HEETS; lil SOLID with Fiit). Sub-trials, which included NS, lil SOLID with Fiit, and lil SOLID with HEET, were performed on eight smokers among the total subjects. Hemodynamic variables, such as systolic blood pressure (SBP) and diastolic blood pressure (DBP), and heart rate variability were measured before, during, and 30 minutes after using each tobacco product. Using HTPs resulted in a significant increase in both SBP and DBP, comparable to smoking cigarettes. Cardiac sympathetic activity significantly increased, and cardiac vagal tone (CVT) significantly decreased after acute exposure to HTP aerosol, similar to the effects of cigarette smoke exposure. Furthermore, differences in the withdrawal of CVT were observed when using different tobacco sticks in the same HTPs. The findings of this study indicate that acute exposure to HTP aerosol increases the hemodynamic burden and disrupts cardiac autonomic balance, similar to exposure to cigarette smoke. Moreover, depending on the type of tobacco stick inserted into the HTP device, acute withdrawal of CVT may have been enhanced.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.245-251
• /
• 2016

Trends of bioplastics, especially biomass-based bioplastics which is one of the most promising ways to solve the depletion of fossil fuels and global warming problems, were investigated. Emerged bioplastic polymers such as polylacticacid (PLA), polyglycolicacid (PGA) for cosmetic additive, polyhydroxyalkanoate (PHA) produced by bacterial fermentation, and cost effective starch-based polymer were discussed with their general studies. Also recent technologies of environment-friendly bioplastics for packaging and construction materials as well as disposable hygienic goods were briefly reviewed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1398-1402
• /
• 2015

In surface mount technology, the use of technology implemented using a Chip Mounter relay that is inserted into the junction box, etc. car is increasing. On the other hand, there is a need for technology to reduce the weight of the heavy component of the relay attached to different Stick Tube generally chips. Therefore, rather than existing technology, this study improved the algorithm of the system to provide a mechanical structure using Air to supply greater stability using this the component feeder utilizing the Stick Tube proposed technology. When the equipment installed in the Air Stick Feeder was used, the effectiveness, such as increased production and reduced disposal expense, was improved.