• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.29-32
• /
• 2012

변장비의 변화가 사각실린더에 작용하는 유체력에 미치는 영향을 알기 위해 EDISON_열유체를 사용하여 수치해석을 하였다. 낮은 레이놀즈수 영역($100{\leq}Re{\leq}200$)에서 사각실린더의 변장비(W/H)를 0.5, 0.75, 1, 2로 변화시키며 해석을 수행하였고, 레이놀즈수와 변장비에 따른 스트로할수(St), 항력계수($C_D$), 양력계수($C_L$)를 비교하였다. 본 논문에서는 레이놀즈수와 실린더의 변장비가 스트로할수, 항력계수, 양력계수에 미치는 영향을 알아보는 데 중점을 두었다. 해석결과 레이놀즈수가 증가하고 변장비가 감소할수록 스트로할수, 항력계수, 양력계수가 증가하는 것을 확인하였다. 본 논문을 통해서 레이놀즈수와 사각실린더의 변장비가 사각실린더에 작용하는 유체력에 영향을 미친다는 것을 알 수 있었다.

• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.1-7
• /
• 2003

본 연구에서는 새로운 $\varepsilon$-SST 난류 모델을 이용하여 벽면 근처에 위치한 정사각주 주위의 유동장에 대한 수치해석을 수행하였다. SST 난류 모델을 수정하여 새롭게 제안된 $\varepsilon$-SST 모델은 뭉툭한 물체 주위의 박리 영역에서 기존의 2-방정식 난류 모델보다 향상된 해석 결과를 보임을 확인하였다. $\varepsilon$-SST 모델을 이용하여 박리가 수반되는 유동영역에 대한 효율적인 해석이 가능할 것이다. 또한, 본 연구에서는 임계 간극 이하에서는 주기적인 와류배출이 억제됨을 입증하였으며, 스트로할수는 간극의 높이와 벽면 경계층의 두께의 영향을 받는 다는 것을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.901-907
• /
• 2008

The measurements of velocity vectors are made in the wake(X/d=8) of a circular cylinder with arc grooves. The experiments are conducted by changing the groove number. groove depth, Reynolds number(Re) and the angle of the first formed groove. We know that the optimum groove angle is 70 degree and the wake velocity profiles are improved at a few conditions. According to vortex shedding frequency distributions. the key solutions to vary the flow field behind the circular cylinder are 70 degree groove angle and more deeper grooves than 0.2mm depth.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.754-759
• /
• 2001

This paper presents unsteady computational investigations and wind tunnel tests on the flow field around a square cylinder with a gap between the body and the ground plane. Two-dimensional unsteady, incompressible Navier-Stokes codes are developed for the computation of the viscous turbulent flows. By computing the flow around a square cylinder without ground effect, three two-equation turbulence models are evaluated and the developed code is validated. The results show a good agreement with experimental values and other computational results. Critical gap height at which the formation of Karman vortex streets is interrupted, is demonstrated and another transition regime is pointed out

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.899-906
• /
• 2005

It is known that an oscillating airfoil can Produce a driving force through the generation of a reversed $K\'{a}rm\'{a}n$ vortex street, and this can be expected to be a new highly effective propulsion system. The wake formation behind the heaving airfoil was visualized and was measured using PIV systems We have been examined various conditions such as frequency number, amplitude in NACA 0010. As Strouhal number is greater than 0.08. wake profile with velocity deficit can be transformed into the wake with velocity excess After evaluating vortex center flow patterns in the wake investigated using tracking trajectories in temporal evaluation of the shedding vortices. We also Presented the experimental results on the unsteady vortices structure of the heaving airfoil at various parameters.

• 소음진동
• /
• 제9권5호
• /
• pp.1005-1011
• /
• 1999

Generation of hole-tones and the instability of circular impinging jets are investigated based on the frequency characteristics and the radiated sound field. The experiment is carried out with varying hole sizes, jet speeds and impinging distances. It is found that hole-tones occur by both the low-speed laminar jet and the high-speed turbulent jet, but not by the transient jet, while plate-tones without holes are produced only in the high-speed turbulent impinging jet. When the diameter ratio of the hole to the nozzle is nearly one, hole-tones occur most easily. At low speed, it is found that hole-tones are due to the symmetrical unstable jet and the impinging distance decreases with jet speed. And the Strouhal number and the sound pressure level increase with jet speed. At high speed, hole-tones show the same characteristics as plate-tones. It is found that the ratio of the convection speed varies with the Strouhal number and the jet speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.846-856
• /
• 2001

An experimental study has been made to investigate the effect on wake flow and vortex shedding frequency by vortex stabilizer in Karman vortex type air flow sensor. The conditions investigated include 3 types of shapes and 3 types of separation distances of the vortex stabilizer. The phase averaged technique and smoke-wire flow visualization method are used to understand the detail information. The rolling up position of shear layer is fixed by the influence of the vortex stabilizer. Especially, the convex type vortex stabilizer has shown the more stable repeatability and linearity regarding the vortex shedding frequency compared to the other types.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1322-1329
• /
• 1994

The effect of thermal stratification on the stratified flow past a circular cylinder was examined in a wind tunnel. Turbulent intensities, the rms values of temperature and turbulent convective heat flux as well as the velocity and temperature profiles in the cylinder wake with a strong thermal gradient of $200^{\circ}C/m$ were measured by using a hot-wire and cold-wire combination probe. It is found that the temperature field affects as an active contaminant, so that the vertical growth of vortical structure is suppressed and the strouhal number decreases with increasing the extent of stratification. And also, the wake structure can not sustain their symmetricity about the wake centerline and vertical turbulent motion dissipates faster than that of the neutral case when such a strong thermal gradient is superimposed. It is evident that the turbulent mixing in the upper half section is stronger than that of the lower of the wake in a stably stratified flow because the turbulent intensities and convective heat flux in the upper half section are larger than those of the lower half of the wake.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.486-493
• /
• 2000

Flow mechanism around air flow sensor of electronic control engine, especially Karman vortex type, was investigated experimentally. The two-dimensional flow characteristics in the intermediate wake region behind a triangular vortex-generator respectively apex forward facing, apex backward facing and vertical flat plates following after apex forward facing(i.e vortex-flowmeter) were investigated at Reynolods number of $ReH=1.4\times10^4$; H is the width of a triangular vortex-generator. The vortex shedding frequency for wide Reynolds number from $7\times10^3$ to $2.1\times10^4$ was also surveyed. The velocity component was measured by X-type hot wire anemometer at 8H downstream from the bluff body. The coherent structure of the intermediate wake behind a bluff body was obtained by conditional phase average technique. As a result, it was verified that the vertical flat plates following after apex forward triangular vortex-generator make not only more linear relation between free stream velocity and vortex shedding frequency but also more periodic vortex in the vicinity of the center of wake.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.16-22
• /
• 2004

지면엔 근접한 사각주 후면에서 발생하는 비정상 와류 배출은 지상 운송체, 교량, 건물 등의 항력 증가뿐 아니라, 동안정성에도 큰 영향을 미친다. 비압축성 평균 Navier-Stokes 방정식에 수정된 ${\varepsilon}-SST$ 난류 모델을 적용하여 사각주 하부와 지면과의 간극 유동을 해석하였다. 사각주 후류에서 와류가 발생하는 경우에는 간극에서의 평균 최대 속도가 억제된 경우에 비하여 높으며, 또한 최대 속도의 위치 또한 사각주 하부에 근접한 것을 확인하였다. 본 연구에서는 사각주 하부에 수평, 수직의 펜스를 설치하는 수동 제어기법을 적용하여 사각 주 후류의 와류 배출용 억제할 수 있다.