• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.29-43
• /
• 2020

The purpose of this study is to propose the design criteria and detailed design model by reviewing the issues related to geometry, formation process, destruction process, hydraulic function, restoration and ecological function of the step-pool from the existing research results, to apply the step-pool sequences to river restoration. Based on the analysis and review results, the design criteria for the structure and size of the step-pool are presented as ratio of the step spacing and the channel width, ratio of the unit step slope and channel slope, and ratio of step height and the particle size. To ensure structural stability of the step, stability analysis method of overturning based on the keystone theory was proposed as a design criterion. As a detailed design concept, a layout model was proposed by applying the imbricating structure of keystones and arch stones to the planar, longitudinal and transverse configurations of the step-pool.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.772-774
• /
• 2012

최근 차량과 플랫폼 사이의 공간에 휠체어의 바퀴 또는 승객의 발이 빠지는 등의 안전사고가 보고되고 있어 교통약자의 이동을 제한하는 요소로 작용함에 따라 차량과 플랫폼 사이 공간을 메우는 안전스텝을 개발하게 되었다. 안전스텝으로 기존 플랫폼에 설치하는 고무타입은 고정식 고무발판을 미리 설치해 두어 차량과 플랫폼의 간격을 미리 줄이는 방식이나 직선, 곡선 형태의 각각의 역사가 가지는 조건에 유연하게 대응하고, 차량의 승객수와 플랫폼의 조건에 따라 달라지는 승하차 높이에 유연하게 대응하고자 차량에 설치하는 방식을 개발하게 되었다. 본 논문에서는 개발한 안전스텝의 구성 및 기능을 설명하고 논하고자 한다.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.202-211
• /
• 2011

The geometric characteristics of step-pool structures and how they are influenced by channel characteristics were investigated in a steep mountain stream in the Experimental Forests of Kangwon National University in Chuncheon, Gangwon-do. Average values of steps for the study reaches were as follows: step spacing, 4.69 m; step height, 0.47 m; step drop, 0.71 m; step-forming particle sizes, 0.68 m; number, 21steps/ 100 m; the ratio of step spacing to channel width, 0.5; and step steepness, 0.13. Relationships between spacing and height of steps and channel gradient showed a negative- and positive correlation, respectively, whereas all geometric variables of steps manifested poor correlation with channel width. Therefore, step steepness, expressed as the ratio of step height to step spacing, increased as channel gradient increased. The ratio of step steepness to channel gradient representing the criterion of maximum flow resistance was 1.2, indicating the channel bed's stable condition. In particular, the relationship between the ratio of step drop to step height and channel gradient showed a significant negative correlation, suggesting the influence of step-pool geometry in trapping sediment and providing an aquatic habitat. Positive correlations also exist between spacing and drop of steps and step particles. Our findings suggest that the dynamics of step-pool structures may strongly control physical and ecological environments in steep mountain streams, so understanding them is essential for stream management.

• Archives of design research
• /
• v.17 no.4
• /
• pp.141-148
• /
• 2004

The purpose of this study is to define the emotion that expressed in step animation and to quantify the intuitional expression of emotion that related step for using extract, measure, analysis the stimulate element about step. The survey of relation with 27 word of emotional expressions and 36 moving pictures of step sample is used for method of this test. The emotional mental structure is transferred to 2 dimensional planes as applying the results of analysis of integrated data using Quantification Method 3, which the integrated data is composed two axial - confidential axial and stabling axial. Analysis of distribution of 2 dimensional diagram shows that the second of the plane and the third of the plane have much data. However, the first of the plane and the forth of the plane have a little data. Through this kind of analysis of graph, it is difficult to express a different emotion between unstable the timidity mind and stable feel the timidity mind using only step analysis. Six difference types about physical elements affecting to emotion are selected and analyzed such as the paces of step, the rate of step, the movement angle of pelvis, the swing range of arm, angle of backbone and the lean angle of body. The result is that the rate of stop and the lean angle of body are the major element that effects to emotional stimulate of stop. This thesis argues about methods transforming subjective expression to objective and quantitative expression with the state of delicate emotion of character apply to step animation naturally. Those data to apply to multi-contents in future are the main target in this study.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.585-594
• /
• 2006

Due to the size limit, the voice coil motor (VCM) is adopted in most of the mobile phone camera to control auto-focus instead of step motor. The optical system using the VCM has the property that the focus values are varying even though the same current is induced. It means that an error of the lens position was taken placed due to the characteristics of the VCM. In this paper, a algorithm was proposed to compensate the lens position error using the step size and the search count of each stage. In the proposed algorithm -7 step middle searching stage is inserted the conventional searching algorithm for the fast auto-focus searching and the final searing step size was set to +1 for the precise focus control, respectively. In the experimental results, the focus values was found more fast in the proposed algorithm than the conventional. And more the image quality by the proposed algorithm was superior to that of the conventional.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.12-20
• /
• 1997

In this paper, the authors propose a method of stepwise tuning a controller with unknown process properties through! its step response. A fuzzy controller is chosen to achieve this aim. The main object of this paper is to give knowledge for the improvement of the response, under the limited prop erties obtained from the step response of the process. We obtained the adequate tuning method through simulations of many control objects. And the method of selecting optimal sampling period is also shown.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.33-37
• /
• 2002

기존 EMFG의 동작해석 알고리즘에서 마크벡터는 정확한 시간 간격이 아닌 각 스텝의 변화를 나타내는 것이었다. 그래서 시간 트랜지션이 있는 EMFG의 경우에는 정해진 지연시간 이외의 필요 없는 시간이 발생하였다. 본 연구에서는 이를 개선하여 초기완료비벡터를 적용하였고, 시간 트랜지션을 가진 EMFG에 대하여 시간의 흐름에 따른 점화가능벡터와 예상완료비를 산출하고, 현완료비에 따라 달라지는 경과완료비를 수학적으로 판단할 수 있도록 개선된 알고리즘을 제안하였다. 제안된 알고리즘을 무인 운전 시스템에 적용하여 시간 흐름에 따른 마크벡터의 변화를 입증하였다. 설계된 EMFG를 개선된 알고리즘에 따라 해석하게 되면, 시스템의 분석 및 설계가 용이하여, 시스템의 성능향상에 도움을 줄 것으로 기대된다.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.435-442
• /
• 2022

The heel effect creates a density difference in the X-ray images because the intensity of the anode and cathode side of the X-ray tube is not equal. The purpose of this study is to evaluate the density difference due to the heel effect by rotating the step wedge by 180 degrees and then changing the distance. After fixing the tube voltage and tube current to 72 kVp and 10 mAs, the forward and reverse directions were taken using a step wedge. At this time, the distance (80 cm ~ 130 cm) was taken at 10 cm intervals, and the density value was measured by setting the region of interest for each step of the step wedge through the M6 program. First, the difference in intensity between the anode and the cathode was confirmed through the radiation exposure test. In addition, when the distance (from 80 cm to 130 cm) was changed, the difference in density between the cathode and the anode decreased as the projection distance increased. As a result, images of uniform density can be obtained as the projection distance increases.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.7-11
• /
• 2015

In this paper, an automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It is very difficult to determine focusing step size and moving direction in one camera autofocusing. The proposed method can improve speed and accuracy of focusing by using the optical axis interval of two cameras, which is automatically set up as focusing step size. Also, it can determine moving direction from focus value comparisons of two cameras, and then solve ambiguity of one camera focusing. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• The Journal of Information Technology
• /
• v.4 no.1
• /
• pp.55-69
• /
• 2001

TradeCard is a B2B (business-to-business) e-commerce infrastructure that enables buyers and sellers to conduct and settle international trade transactions securely over the Internet. and objective of TradeCard is to provide a secure, reliable, cost-effective and user-friendly solution for conducting and settling international trade transactions. This paper analyzes the reviews of TradeCard by Electronic Message and the various problems which come to application of TradeCard, with particular attention to existing international frameworks for payment systems based on Documentary Credit.