• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.730-738
• /
• 1993

This paper proposes a dynamic formatting method for processing large amounts of document in a device independent manner. And it is very useful for cross-referencing among pages in a single document and for presenting multiple pages simultaneously. The method can be applied usefully to hypertext's application such as establishing a link and a cross-reference among pages in a multiple document. We implemented an electronic publishing system of WYSIWYG type using X window system and Motif graphical user interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.472.2-472.2
• /
• 2014

현재 결정질 실리콘 태양전지의 전 후면 전극의 형성은 스크린 프린팅 방법이 주를 이루고 있다. 스크린 프린팅 방법은 쉽고 빠르게 인쇄가 가능한 반면 단가가 높고 금속 페이스트에 첨가된 여러 혼합물에 의해서 전극과 기판 사이의 저항이 크다는 단점이 있다. 본 논문에서는 도금을 이용하여 태양전지의 전극을 형성한 후 태양전지의 전기적 특성을 비교하였다. 또한 단일반사방지막($SiN_x$) 증착 후 도금을 이용한 전극 형성 시 반사방지막의 pin-hole에 의해 전극 이외의 표면에 도금이 되는 ghost plating 현상이 발생하게 되는데, 이를 방지하기 위해 thermal oxidation을 이용하여 SiO2/SiNx 이중반사 방지막을 증착함으로써 ghost plating을 최소화 시켰다. Ni을 이용하여 전극과 기판 사이의 저항을 낮추었으며, 주요 전극은 Cu 도금을 사용함으로써 단가를 낮추었으며 마지막으로 Cu전극의 산화를 방지하기 위해 Ag을 이용하여 얇게 도금하였다. 실험에 사용된 Si 웨이퍼 특성은 p-형, $156{\times}156mm2$, $200{\mu}m$, $0.5{\sim}3.0{\Omega}{\cdot}cm$ 이다. 웨이퍼는 표면조직화, p-n접합 형성, 반사방지막 코팅을 하였으며 스크린 프린팅 방법을 이용해 후면 전극을 인쇄하고 열처리 과정을 통해 전극을 형성하였다. 이 후 전면에 레이저를 이용해 전극 패턴을 형성한 후 도금을 실행하여 태양전지를 완성하였다. 완성된 태양전지는 솔라 시뮬레이터, QE 및 TLM패턴을 이용하여 전기적 특성을 분석하였으며, SEM과 linescan, 광학현미경 등을 이용하여 전극을 분석하였다.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.493-500
• /
• 2023

In this study, we developed an impedance sensor capable of controlling electrode polarization by coating iridium oxide (IrO_x) on the surface of the screen-printed carbon electrode. IrO_x was deposited on the surface of carbon electrodes according to the number of cycles (0~50 cycles) by cyclic voltammetry. Observation of scanning electron microscope images revealed that the size and number of IrO_x particles increased as the number of cycles increased. The changes in impedance responses as a function of the NaCl concentration of the as-obtained sensors were investigated using electrochemical impedance spectroscopy. The sensors manufactured in 50 cycles exhibited the best coefficient of determination and reproducibility, attributed to the well-controlled electrode polarization. We further demonstrated the usefulness of the IrO_x-based sensor as a diagnosis sensor for dry eye syndrome by comparing the results of the commercially available osmometer and our sensor using actual solution samples.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.169-175
• /
• 2002

The purpose of this study is to verify the usefulness of X-ray simulator which uses a visible light source for further study. We developed a small experimental equipment which is composed of three main components - source, localizer and detector. Cartesian coordinate was set in 3D space, and the position of target was assumed the origin of the coordinate. The light from the source passes directly through the target, and projection image is formed on the screen, which can be taken with the digital camera. Since projection images were acquired behind the screen, they were flipped over right and left. By examining the characters of visual light source and equipments, it could be concluded that developed system was useful for experimental purpose.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.196-203
• /
• 2011

Experiments to determine heat transfer coefficients and friction factors are conducted on a stationary transverse parallel wire-screen rib roughened rectangular channel. The test section consists of 198 mm (W) x 40 mm (H) x 712 mm (L). The channel has the aspect ratio of 4.95 and hydraulic diameter of $D_h$=6.66 cm. Four wire screen ribs and a solid rib are used. 0.1 mm-thick-stainless steel foil heaters and thermocouples (T type) are used to measure the heat transfer coefficients. Reynolds numbers studied range from 20,000 to 60,000. The wire-screen rib height (e) to hydraulic diameter ($D_h$) ratio ($e/D_h$) is 0.075; spacing (p) to height ratio (p/e) is 10. Results indicate that the solid rib produces the greatest Nusselt number and friction factor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.72-76
• /
• 2004

본 논문은 CdS의 소성 온도가 방사선 검출 특성에 미치는 영향을 조사하였다. CdS 센서는 스크린 프린터 방식을 이용해 $40{\mu}m$의 두께로 제조하였다. XRD 와 SEM을 이용하여 형성된 CdS 필름의 구조 및 형상을 분석하였다. 제조된 CdS 센서에 대해 X선 반응 특성을 조사하기 위해 I-V 측정을 수행하였다. 인가 전압에 따른 Dark current, x-ray sensitivity 및 선량에 따른 Linearity을 측정한 결과 CdS 센서가 $450^{\circ}C$이상 소성시 방사선에 대한 우수한 검출 특성을 보였다.

• Journal of Industrial Convergence
• /
• v.19 no.6
• /
• pp.49-57
• /
• 2021

Digital Signage and multi-view image system are used as the 4th media to deliver stories and information due to their strong immersion. A content image displayed on large Digital Signage is produced with the use of computer graphics, rather than reality image. That is because the images shot for content making have an extremely limited range of production and their limitation to high resolution, and thereby have difficulty being displayed in a large and wide Digital Signage screen. In case of Screen X and Escape that employ the left and right walls of in the center a movie theater as a screen, images are shot with three cameras for Digital Cinema, and are screened in a cinema with multi-view image system after stitching work is applied. Such realistic images help viewers experience real-life content. This research will be able to display high-resolution images on Digital Signage without quality degradation by using the multi-view image making technique of Screen X and Chroma key technique are showed the high-resolution Digital Signage content making method.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.73-87
• /
• 2021

Special theaters were created to provide a sense of immersion and spectacles due to differentiated screens, sound, seating facilities, and advanced services, and also expanded screens. The purpose of this study is to perform comparative analysis of the technical characteristics formats shown in special theaters(3D film, 4DX, IMAX, ScreenX, and VR) in order to identify and find ways to overcome the technological limitations in production. The various formats show differences in field of view depending on the exhibition technology and these differences affect the mise-en-scene, narrative, and editing of the film and consequently result in changes in the production environment and process. Therefore, directors and creators must understand the technological features and limitations of the new formats before making their approach. However, a new format encounters limitations on production sets due to the decline of technical education and succession. In situations where shooting with a special camera is essential, the particular characteristics of each format should be carefully considered from the planning stage but financial problems arise due to increase in production period and cost. To overcome these various obstacles, it is essential to first identify problems and present alternatives through in-depth research on the production set of each format. Finally, this research aims to explore the prototype of each format and analyze the current state of production technology with formats that have not been adapted to the market trends by combining with the other formats and showing that they can survive in new ways.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.47-58
• /
• 2012

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. Value of color coordinates X and Y increased under the condition of supplying driving power to the inorganic powder EL lamp and changing voltage with constant frequency. When frequency was changed under the constant voltage, value of color coordinates X and Y were decreased with increasing frequency. However, level of change of color coordinates X was different from color coordinates Y. When voltage was increased under constant frequency, changing degree of color coordinates X and Y shows similarity. But under the constant voltage with changing frequency, color coordinates X and Y were differently changed that degree of change of color coordinates Y showed five times more than that of color coordinates X. As increasing thickness of phosphor ink and dielectric ink, level of voltage and frequency, color coordinates X and Y were slightly changed. According to the thickness of phosphor ink and dielectric ink, and level of voltage and frequency, color coordinate of color light was changed. Frequency was most important element influencing on the change of color coordinate.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.98-101
• /
• 2005

변환 효율이 $16\%$에 근접하는 다결정 실리콘 태양전지를 위한 열처리 공정에 대한 연구를 수행하였다. 고속 열처리 공정이 가능한 RTP 를 사용하여 다결정 실리콘 태양전지의 효율 향상에 요구되는 PECVD $SiN_x$ 반사방지막을 이용한 결정 결함의 수소화 효과를 극대화하는 동시에 양산 가능한 screen-printed contacts 의 특성 (FF >0.76) 올 최적화함으로써 다결정 실리콘 태양전지의 변환 효율을 $15.9\%$까지 향상시킬 수 있었다.