• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.219-222
• /
• 2013

본 논문에서는 스크래치2.0을 활용한 초등정보영재의 프로그래밍 교육 방안을 제안하고자 한다. 스크래치는 블록을 쌓는 것만으로 프로그래밍이 가능하기 때문에 프로그래밍을 처음 접하는 초등정보영재 학생의 프로그래밍 교육과정으로 적합하다. 또한 2.0으로 버전업되면서 스크립트 보기(See inside)나 리믹스(Remix)기능이 추가되어 프로그램의 공유 및 협업이 더 용이하여졌다. 따라서 이러한 스크래치2.0의 기능을 사용한다면 학습자에게 필요한 협업 및 의사소통 능력을 기르게 하는데 적합하다고 할 수 있다. 또한 영재학생들은 학습자 스스로 목표를 정하고 계획을 능동적으로 수행해나갈 때 높은 성과를 보이는 특성이 있다. 따라서 자기 주도적 학습 모형을 영재학생들에게 사용한다면 더 효과적이다. 이에 본 연구에서는 스크래치 2.0을 활용하여 Treffinger의 자기 주도적 학습모형을 적용한 프로그래밍 교육 방안을 제안하였다. 추후에 초, 중, 고 영재기관 연계를 위한 프로그래밍 교육위계에 대한 연구가 필요하다.

• Journal of The Korean Association of Information Education
• /
• v.19 no.1
• /
• pp.149-158
• /
• 2015

Programming education plays a very effective role in comprehensively learning problem analysis ability, logical thinking ability, procedural problem solving method, and imaginary problem solving method. Until recently, however, it is not applied to the elementary and the middle school in Korea, which is very different from the other IT centerd countries such as the U.S., etc., where coding class is actively implemented. Fortunately, Korean government recognized this reality and decided to implement programming education as a regular subject in the elementary school from 2017. In this situation, many researchers' programming education model research is urgently required for the students to learn in the elementary and the middle school. This research developed and suggested 17 sessions of programing education model connected with scratch language and sensor board, which is hardware, to be applied to the class of the 5th and 6th graders. As the result of implementing the joint class of 5th and 6th graders during the after-school class based on programming education process suggested to verify the suitability for elementary school programing education, satisfactory achievement was attained by the assessed students. The researcher plans to develop an optimum model proper for the elementary school students' intellectual capacity by more improving programming education model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.194-194
• /
• 1999

다이아몬드 박막은 결정립에 의해 심한 표면 거칠기를 나타낸다. 루비를 상대재료로 사용하여 하중 50g, 50rpm의 회전속도로 마모시험을 하였으며 마모 track의 직경은 100mm였다. 마찰계수는 0.5에서 계속 감소하며 0.1이하에서 안정한 상태를 유지하게 된다. 이 다이아몬드 박막위에 저마찰재료로 알려진 PTFE를 타겟으로 RF로 증착한 후 같은 조건으로 마모시험을 행하면 마찰계수가 초기부터 일정하게 유지할 수 있게 된다. 반면에 MoS2박막이 증착된 경우에는 완만한 마찰계수의 감소가 나타난다. 이러한 변화의 원인으로는 DLC 박막에서 보고되고 있는 바와 같이 다이아몬드의 sp3 결합구조가 마모시험중 흑연화하여 sp2 결합구조로 변하기 때문인 것인지 살펴보기 위하여 micro Raman을 통하여 마모 track을 분석하였고 AFM을 통하여 표면거칠기 변화와 표면 스크래치 발생 여부를 살펴보았다.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.837-842
• /
• 1999

The Ta/TaN multilayer structure with repeating layers of a poly-crystalline Ta layer of high ductility and a TaN layer of high hardness is expected to exhibit toughness. This paper reports the results on the hardness and the adhesion strength of Ta/TaN multilayers and compositional gradient Ta/TaN layers deposited on the high speed steel substrate by reactive sputtering as a function of annealing temperature. The TaN film deposited with the $N_2$/Ar ratio of 0.4 in the reactive sputtering process exhibits the highest crystallinity, and the highest hardness and the results of scratch test of the Ta/TaN multilayers. The hardness and adhesion strength of the Ta/TaN multilayers becomes deteriorated with increasing the annealing temperature in the heat treatment right after depositing the layers. Therefore, post-annealing treatments are not desirable in the case of the Ta/TaN multilayers from the standpoint of mechanical properties. Also the hardness of Ta/TaN multilayers increases with decreasing the compositional modulation wavelength, but the adhesion property of the layers is nearly independent of the wavelength. On the other hand, the compositional gradient Ta/TaN film exhibits the highest hardness and the value of scratch test for the post-annealing temperatures of 20$0^{\circ}C$ and 40$0^{\circ}C$, respectively. This tendency of the compositional gradient Ta/TaN films differs from that of the Ta/TaN multilayers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1507-1510
• /
• 2005

This study was carried out as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-\mu{m}-deep$ indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.49 GPa and 100 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46-0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined area during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.171-177
• /
• 2006

This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.225-225
• /
• 2012

DLC (Diamind-Like Carbon) 코팅은 1970년대 이온주입기술을 통하여 개발된 것이 처음으로 알려져 있으며, 다이아몬드 구조인 SP3 구조와 그라파이트 구조인 SP2 구조가 혼재되어 있으면서 제조 방법에 따라 수소와 Si 및 다양한 금속을 내재시킬 수 있는 코팅 물질이다. DLC는 높은 경도, 내마모성, 윤활성, 표면조도 등 뛰어난 기계적 특성과 전기절연성, 화학적 안정성 그리고 높은 광학적 투과성을 가져 산업적 활용 잠재력이 높은 재료로 평가되고 있으며, 이외에도 낮은 공정 온도에서 증착할 수 있고, 고경도와 낮은 마찰계수를 가지고 있는 장점이 있다. 그러나, DLC가 열적으로 불안정하기 때문에 사용되는 환경이 $500^{\circ}C$ 이상이 되면 DLC는 자체의 성질을 잃고 거의 흑연에 가까운 물질이 되어버리는 문제가 있고, 또한 높은 압축응력과 기재와의 낮은 밀착력이 단점으로 나타나고 있다. 이에 본 연구는 그런 단점을 보완하고자 PECVD (Plasmas Enhanced Chemical Vapor Deposition) 방법으로 DLC박막에 여러 가지 첨가원소(F,Si,0)를 사용하여 증착시킨 후 400, 500, $600^{\circ}C$에서 1시간동안 열처리를 진행하였으며, 그에 따른 내열 특성을 평가하였다. 또한 염수분무 테스트를 통한 박막의 내식 특성을 평가하였다. DLC박막의 구조는 Raman Spectra을 통해, Sp3 (like diamond) peak와 Sp2 (like graphite) peak 의 혼재 여부를 분석하였고, FE-SEM을 이용하여 막의 표면 및 단면을 관찰하였다. 스크래치 테스트를 통해 DLC박막의 밀착력을 측정하였으며, 볼 온 디스크 타입의 Tribo-meter을 이용하여 마찰계수 변화를 관찰하였다. 또한 나노인덴터를 이용하여 미소경도를 측정하였다. 그 결과 일반 DLC 막에 비해 첨가원소가 함유된 DLC 박막에서 내식성 및 내열특성이 향상되었다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2019

We have developed the multi-functioned friction measuring instrument for the previous research. In here, we improved the performance of friction measuring instrument by applying the adaptive smoothing method and analyzed the friction of plate and monitoring function of friction surface through scratch tests. We substituted lubricant steel plate to lubricant oil used for reducing the friction when fabricating steel plate because lubricant oil was regarded as one of the major causes for the environmental pollution. In particular, the functions of various plate such as galvannealed steel sheets were analyzed because friction coefficient could be changed depending on the type of organic/inorganic plate or state of coating layer. Therefore, we demonstrated that adaptive smoothing method could enhance the accuracy of measuring instrument which eliminate the noise. As a result of using the method, it showed the reduction rate 0.0417% for the friction coefficient 0.16.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.243-243
• /
• 2003

무기 나노 입자와 유기물간의 균일한 화학적 결합으로 제조된 나노 구조형 재료는 수많은 용도에 부응할 수 있는 기계적, 전기적 및 광학적 특성을 설계, 제조하는데 유용한 방법으로 사용되고 있다. 이중 화학적 습식 졸-겔 공정은 나노 구조형 유/무기 하이브리드 재료 제조에 매우 효과적인 방법으로 알려져 있으며 내부식성 금속 코팅막, 내 스크래치 코팅막 제조에 활용되고 있다. 그러나 무기 나노 졸 입자와 유기물과의 매개로 작용하는 커플링제와의 하이브리드 과정에 대한 정보는 극히 조금 알려져 있다. 본 연구에서는 알루미나 나노 졸과 GPS((3-glycidoxypropyl-triethoxysilane)와의 하이브리드 생성 과정을 이온 전도도 측정으로 관찰한 결과를 보고하고자 한다. 알루미나 나노 졸은 Al(NO$_3$)$_3$.9$H_2O$ 수용액에 NH$_4$OH를 가하여 침전물을 얻고 여과 및 수세하여 졸 입자의 함량이 약 5 wt%가 되게 이온교환수와 해교제인 초산을 소량 가하여 10$0^{\circ}C$에서 약 50시간 열처리하는 방법으로 제조하였다. 알루미나 졸 입자와 GPS와의 결합 과정을 reactor FT-IR로 시간에 파라 연속적으로 분석하여 그 반응 경로를 이온 전기전도와 비교하여 논의 될 것이다. 아래 그림 1은 알루미나 나노 졸에 GPS를 첨가한 후 시간에 따라 얻어진 이온 전기전도도를 나타낸 그림이다.

• Journal of The Korean Association of Information Education
• /
• v.23 no.2
• /
• pp.189-196
• /
• 2019

Artificial intelligence has begun to be used in various parts of our lives, and recently its sphere has been expanding. However, students tend to find it difficult to recognize artificial intelligence technology because education on artificial intelligence is not being conducted on elementary school students. This paper examined the teaching programming language and artificial intelligence teaching methods, and looked at the changes in students' attitudes toward artificial intelligence technology by conducting education on artificial intelligence. To this end, education on block-type programming language-based artificial intelligence technology was provided to students' level. And we looked at students' attitudes toward artificial intelligence technology through a single group pre-postmortem. As a result, it brought about significant improvements in interest in artificial intelligence, possible access to artificial intelligence technology and the need for education on artificial intelligence technology in schools.