• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2008

Accurate voice activity detection have a great impact on performance of speech applications including speech recognition, speech coding, and speech communication. In this paper, we propose methods for voice activity detection that can adapt to various car noise situations during driving. Existing voice activity detection used various method such as time energy, frequency energy, zero crossing rate, and spectral entropy that have a weak point of rapid. decline performance in noisy environments. In this paper, the approach is based on existing spectral entropy for VAD that we propose voice activity detection method using MFB(Met-frequency filter banks) spectral entropy, gradient FFT(Fast Fourier Transform) spectral entropy. and gradient MFB spectral entropy. FFT multiplied by Mel-scale is MFB and Mel-scale is non linear scale when human sound perception reflects characteristic of speech. Proposed MFB spectral entropy method clearly improve the ability to discriminate between speech and non-speech for various in noisy car environments that achieves 93.21% accuracy as a result of experiments. Compared to the spectral entropy method, the proposed voice activity detection gives an average improvement in the correct detection rate of more than 3.2%.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.295-301
• /
• 2006

An operational strategy for inventory control on finished goods in the distribution system has been given attention to many enterprises and many studies regarding this field have been done and is also on-going currently. It handling large scale of smallness type are so the requisition of customer which is various that over it continues more full scale merit. therefore, It is a tendency that many of enterprise is handling small scale of smallness type for environment change confrontation. but It is not easy for the enterprise to In customer demand diversification suiting because too need many cost. In addition, at enterprise charge extra weight because remainder inventory is causes of defective stock for a inefficient problem solution. this paper is rationalization of stock cost decrease for comparison evaluation of small scale quantify handling of singleness type and small scale quantity handling of largeness type.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.129-135
• /
• 2015

The objective grading system for the facial palsy is needed. In this study, the facial palsy grading system was developed with combination of three dimensional image processing and Nottingham scale. The developed system is composed of 4 parts; measurement part, image processing part, computational part, facial palsy evaluation & display part. Two web cam were used to get images. The 8 marker on face were recognized at image processing part. The absolute three dimensional positions of markers were calculated at computational part. Finally, Nottingham scale was calculated and displayed at facial palsy evaluation & display part. The effects of measurement method and position of subject on Nottingham scale were tested. The markers were measured with 2-dimension and 3-dimension. The subject was look at the camera with $0^{\circ}$ and $11^{\circ}$ rotation. The change of Scale was large in the case of $11^{\circ}$ rotation with 2-dimension measurement. So, the developed system with 3-dimension measurement is robust to the orientation change of subject. The developed system showed the robustness of grading error originated from subject posture.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.571-575
• /
• 2016

Photo responsive polymer(PRP) is well known for its photo deformation under UV light, and goes back to its original shape in visible light due to the photoisomerization of the azobenzene inside the PRP. In this paper, dynamic study of the vibration in PRP is discussed. In order to predict photo-deformation of the PRP a multiscale modeling is introduced which covers quantum level photo excitation, microscopic morphology, and macroscopic deformation of the PRP. A simple 1D beam model is introduced to model dynamic bending behavior of the PRP. Through fast Fourious transformation analysis, we identify that vibration frequency of the PRP can be controlled by light polarization angle.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.165-173
• /
• 2016

On March 11, 2011, a massive earthquake measuring 9.0 on the Richter scale and subsequent 10-.14 m waves struck the Fukushima Daiichi (FD) Nuclear Power Plant. The main and backup electric power was damaged preventing the cooling system from functioning. Fuel rods overheated and led to hydrogen explosions. If heat in the fuel rods is not dissipated, the nuclear fuel coating material (e.g., Zircaloy) reacts with water vapor to generate hydrogen at high temperatures. This hydrogen is released into the containment area. If the released hydrogen burns, the stability of the containment area is significantly impacted. In this study, researchers performed an explosion analysis in a high-risk explosion area, analyzing the hydrogen distribution in a containment building [1] and the effects of a hydrogen explosion on containment safety. Results indicated that a hydrogen explosion was possible throughout the containment building except the middle area. If an explosion occurs at the top of the containment building with more than 40% of the hydrogen collected or in the bottom right or left side of the of containment building, safety of the containment building could be threatened.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.429-434
• /
• 2017

A molecular-continuum hybrid method was developed to simulate microscale and nanoscale fluids where continuum fluidics cannot be used to predict Couette flow. Molecular dynamics simulation is used near the solid surface where the flow cannot be predicted by continuum fluidics, and Navier-Stokes equations are used in the other regions. Numerical simulation of Couette flow was performed using the hybrid method to investigate the effect of solid-liquid interaction and surface roughness in a nanochannel. It was found that the solid-liquid interaction and surface roughness influence the boundary condition. When the surface energy is low, slippage occurs near the solid surface, and the magnitude of slippage decreases with increase in surface energy. When the surface energy is high, a locking boundary condition is formed. The roughness disturbs slippage near the solid surface and promotes the locking boundary condition.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.924-932
• /
• 2012

Decomposition of a stereo signal into the primary and ambient components is a key step to the stereo upmix and it is often based on the principal component analysis (PCA). However, major shortcoming of the PCA-based method is that accuracy of the decomposed components is dependent on both the primary-to-ambient power ratio (PAR) and the panning angle. Previously, a modified PCA was suggested to solve the PAR-dependent problem. However, its performance is still dependent on the panning angle of the primary signal. In this paper, we proposed a new PCA-based primary-ambient decomposition algorithm whose performance is not affected by the PAR as well as the panning angle. The proposed algorithm finds scale factors based on a criterion that is set to preserve the powers of the mixed components, so that the original primary and ambient powers are correctly retrieved. Simulation results are presented to show the effectiveness of the proposed algorithm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.354-354
• /
• 2011

금강유역에 대한 기후변화 영향을 기후모형 및 수자원영향평가모형을 통하여 정량적으로 분석하기 위하여 한반도 최적 GCM모형으로 기상청에서 제공하는 ECHO-G GCM모형과 역학적 다운스케일링 기법을 이용한 공간해상도 27km의 지역규모의 MM5 RCM모형을 이용하였다. A1B시나리오 기반으로 고해상도 기후변화 시나리오를 작성하여 분석기간을 2015년대(2001-2030), 2045년대(2031-2060), 2075년대(2061-2090)로 구분하여 미래 연평균강수량, 기온 등을 전망하였고, 과거 30년 자료의 100년빈도 강수량과 미래의 100년 빈도강수량의 변동성을 평가하였다. 기본적으로 GCM 및 RCM은 시공간적 스케일의 상이성으로 인해 수자원 영향 평가를 위한 자료로서 직접적인 이용은 현실적으로 곤란하다는 점에서 본 연구에서는 RCM 격자자료를 유역단위에서 강우관측소 지점 단위로 공간적 Downscaling을 실시하였으며 RCM 월자료에 대해서 일단위 자료로 시간적 Downscaling을 수행하여 기후모델로부터 발생하는 시공간적 스케일의 문제점을 극복하였다. 또한 유역단위의 상세수문시나리오를 생산하기 위해서 다지점 비정상성 Downscaling 기법을 활용하여 기존 일강수량 모의기법에서 간과 되었던 비정상성을 고려하여 미래 기후변화에 따른 강수사상의 변동성을 다양한 방법으로 검토하였다. 2001년~2006년 기간동안 SWAT모형을 이용하여 용담댐유역 용담댐 지점의 유입량과 SWAT의 최종방류부의 유량분석값을 비교한 결과 모의치와 실측치가 90.1% 일치하는 것으로 나타났고, 천천수위관측소 지점의 유량을 모형결과와 비교분석 한 결과에서도 91.3% 일치하는 것으로 나타났다. 한편, 대청댐 지점의 유입량과 SWAT의 최종방류부의 유량분석값을 비교한 결과 모의치와 실측치가 84.4% 일치하는 것으로 나타나 금강유역내 용담댐 및 대청댐을 대상으로 유출분석 검토 결과 적용성이 있음을 확인하였다. 기후변화 분석기간은 2011년부터 2090년까지 80년을 대상기간 으로 선정하였으며, 분석결과 2011~2020년 사이 유출량이 18%증가하는 것으로 전망되었다.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.205-214
• /
• 2007

The objective of this study is to generate the regional scale runoff scenarios by using IPCC SRES A2 climate change scenario for analyzing the spatial variation of water resources in Korea. The PRMS model was adopted to simulate long-term stream discharge. To estimate the PRMS model parameters on each sub-basin, the streamflow data at 6 dam sites and Rosenbrock's scheme are used for model parameter calibration and those parameters are translated to ungauged catchments by regionalization method. The other 3 dam sites are selected for the verification of the adequateness of regionalized model parameters in ungagued catchments. The statistical results show that the simulated flows by using regionalized parameters well agree with observed ones. The generated runoff scenarios by climate change are compared with observed data on 4 dam sites for the reference period. The consequences show that the selection of climate station for generating climate scenario affects the reliability of climate scenario at sub-basin. The comparison results of the stream flows between the 30-year baseline period (1971-2000) and future 90-year (2001-2030, 2031-2060, 2061-2090) show that the long-term mean annual runoff in the Han River has increasing trend, while the Nakdong, the Gum, the Youngsan and the Sumjin Rivers have decreasing trend.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.177-185
• /
• 2014

Purpose: This study is designed to investigate the various impacts of different types of scaler tips such as cooper alloy base tip and the others on the surface roughness of teeth and implant by the method which is currently in clinical use. Materials and methods: Four different types of disc shaped porcelain, titanium, zirconia, and Type III gold alloy dental materials sized 15 mm diameter, 1.5 mm thickness were used for the experiment. Plastic hand curette (Group PS), cooper alloy new tip (Group IS), and stainless steel tip (Group SS) were used as testing appliances. A total of 64 specimens were used for this study; Four specimens for each material and appliance group. Surface roughness was formed with 15 degree angle in ultrasonic scaler tip and with 45 degree angle in hand curette of instrument tip and the specimen surface with 5 mm long, one horizontal-reciprocating motion per second for 30 seconds by 40 g force. To survey the surface roughness of each specimen, a field emission scanning electron microscope, an atomic force microscope, and a surface profiler were used. (Ra, ${\mu}m$). Results: According to SEM, most increased surface roughness was observed in SS group while IS groups had minimal roughness change. Measurement by atomic force microscope presented that the surface roughness of SS group was significantly greater than those of PS, IS and control groups in the type III gold alloy group (P<.05). IS group showed lesser surface roughness changes compared to SS group in porcelain and gold alloy group (P<.05). According to surface profiler, surface roughness of SS group showed greater than those of PS, IS and control groups and IS group showed lesser than those of SS group in all specimen groups. Type III gold alloy group had large changes on surface roughness than those of porcelain, titanium, zirconia (P<.05). Conclusion: The result of this study showed that newly developed copper alloy scaler tip can cause minimal roughness impacts on the surface of implant and dental materials; therefore this may be a useful alternative for prophylaxis of implant and restored teeth.