• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.139-146
• /
• 2015

This paper presents the solution to model matching of switched asynchronous sequential machines by corrective control. We propose a model of switched asynchronous sequential machines, in which the system can have different dynamics of asynchronous machines governed by a pre-determined sequence of switching. The control objective is to derive a corrective control law so that the stable state behavior of the closed-loop system can match that of a prescribed model. A new skeleton matrix is defined to represent the reachability of the switched asynchronous machine, and a novel control scheme is presented that interweaves the switching signal and the corrective control procedure. A design algorithm for the proposed controller is illustrated in a case study.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.1
• /
• pp.9-13
• /
• 1996

슬라이딩 모드 제어기의 실현시 발생하는 고주파 chattering 현상을 제거하기 위하여 본 논문에서는 스위칭 표면 행렬의 Range-space 동특성을 이용한 연속 시간 스위칭 다이나믹을 제안한다. 전체 폐루프 시스템은 정칙 변환에 의해 빠른 부시스템과 느린 부시스템으로 분해되어, 결국 전체 폐루프 시스템의 고유치는 각각 스위칭 표면 행렬의 Range-space와 Null-space의 동특성을 지배하는 부시스템들의 고유치들로 구성됨을 보인다. 그리고, 정합된 불확실성이 존재하는 경우 제안된 스위칭 다이나믹을 가진 제어 시스템의 응답은 일정 시간이 경과된 후 스위칭 평면의 임의의 영역으로 균일하게 유계된다는 것을 증명한다. 또한, 제어 입력의 크기에 대한 제약성을 만족하면서도 전체 제어 시스템의 정상 상태 오차를 감소시키기 위하여 두개의 스위칭 다이나믹을 도입한 수정된 슬라이딩 모드제어기를 제안한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.67-76
• /
• 2009

Recently, the active interaction control (AIC) system was proposed as a semi-active control system. The AIC system consists of a primary structure and an auxiliary structure. The objective of the AIC system is to control the response of the primary structure through engagement and disengagement between the primary and auxiliary structures. Previous switching control algorithms have been shown to be effective in reducing the response of the primary structure. However, they have the main drawback of requiring an excessive engagement-disengagement frequency and high interaction force. In this paper, the regions in which the switching is activated and the regions in which the switching is deactivated are described separately, to effectively determine the engagement or the disengagement. The general relationship between the switching regions and the deactivated switching regions selected according to the engagement-disengagement conditions is described within the newly-developed comprehensive switching framework. The proposed engagement-disengagement conditions are designed within a comprehensive switching framework, to reduce engagement-disengagement frequency and interaction force. Furthermore, the effect of a control sampling period on the AIC system is explained in terms of the engagement-disengagement frequency. The effectiveness of the proposed algorithms and the effect of the control sampling period are considered for a single degree of freedom model under free vibration. It is observed that increasing the duration of stay by using a large control sampling period prevents the AIC system from activating the possible chance of switching. The proposed algorithms are shown to be effective, both in restricting ineffective switching and in reducing interaction force.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.387-388
• /
• 2014

3상 AC/AC 2단계 직접형 전력변환시스템(TSDPC)의 제어는 입력전류공간벡터와 출력전압공간벡터를 합성한 공간벡터 PWM 스위칭패턴을 통해 제어를 하며, 이를 기반으로 계산된 유효벡터인가시간에 따라 TSDPC를 구성하는 다수 스위칭소자가 절환 됨을 통해 많은 스위칭손실이 발생하는 문제점이 있다. 본 논문에서는 스위칭 시퀀스를 간략화하여 스위칭 절환횟수를 줄임과 동시에 부분 영전류 스위칭 제어기법을 도입하여, 스위칭손실 저감 제어기법을 제안한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.149-152
• /
• 2001

본 논문은 연속 시간과 이산 시간에서의 스위칭 모드 퍼지 모델 기반 제어기의 새로운 설계 기법에 대해서 논의한다. 스위칭 모드 퍼지 모델 기반 제어기의 설계에는 Takagi-Sugeno(75) 퍼지 시스템이 사용된다. 이 스위칭 모드 퍼지 모델 기반 제어기는 "정복-분할(divide and conquer)"이라는 하향식 접근 방식을 이용한다. 이 방법은 여러 개의 규칙을 가지고 있는 시스템에서 유한의 하위 시스템으로 시스템을 분할하여 각각의 부분 해를 구하고 이들을 결합하여 전체 시스템의 해를 구하는 방법이다. 제어기의 설계 조건은 주어진 75 퍼지 시스템의 안정화를 보장하는 선형 행렬 부등식들(LMls)에 의해 결정된다. 적절한 시뮬레이션 예제를 통한 성능 비교를 통해 본 논문의 우수성을 입증한다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1874-1875
• /
• 2011

본 논문에서는 스위칭 선형 시스템의 적응 LQ 준최적 제어를 위한 Q-학습법 알고리즘을 제안한다. 제안된 제어 알고리즘은 안정성이 증명된 기존 Q-학습법에 기반하며 스위칭 시스템 모델의 변수를 모르는 상황에서도 준최적 제어가 가능하다. 이 알고리즘을 기반으로 기존에 스위칭 시스템에서 고려하지 않았던 각 시스템의 불확실성 및 최적 적응 제어 문제를 해결하고 컴퓨터 모의실험을 통해 제안한 알고리즘의 성능과 결과를 검증한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.511-519
• /
• 2013

Switching controllers for active magnetic bearings are claimed to minimize the copper losses because they do not use bias currents. In this study, we compare the performances of the switching controller with those of the widely used proportional-derivative (PD) controller. The PD controller is combined with a synchronous notch filter to reduce the effect of the unbalance disturbance. For a fair and objective comparison, the PD controller is designed systematically. The switching controller is designed so that the dynamics of the two controllers are almost identical. A system model is developed. This model includes the flexible modes of the rotor and the dynamics of the sensors and amplifiers. The simulation results show that the switching controller indeed reduces the copper loss at lower speeds. However, it fails to operate around the speed close to the bending mode of the rotor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.9
• /
• pp.793-800
• /
• 2001

This paper deals with a new design methodology for a switching-type fuzzy-model-based controller in continuous and discrete-time system. Takagi-Sugeno (TS) fuzzy model is employed to design the switching-type fuzzy-model-based controller. A switching-type fuzzy-model-based controller is constructed based on the spirit of “divide and conquer”. The global system which has several rules in divided into several subsystems and then, a solution is found at each subsystem. The global solution is determined by a conjunction of the solutions of each subsystem. The design conditions are formulated in terns of linear matrix inequalities (LMIs), which guarantee the stabilization of a given TS fuzzy system. Simulation examples are included for ensuring the proposed control method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.107-112
• /
• 2013

In the paper, velocity controller of switching module and temperature controller for the high-voltage static var compensator are proposed. Because of the continuous increase in demand for electric power, transmission and distribution facilities of power plant are required. There is a bottleneck problem of transportation routes according to new construction and expansion of power transmission facilities. Therefore there are researches to maximize the utilization of existing facilities and to increase transmission capacity without new construction. The previous static var compensator detects voltage of input circuit of power, switches the SCR directly and generates switching noise. The proposed method increases switching velocity and decreases noise using switching control based on the voltage between both sides of SCR. Also the proposed method enhance the stability using realtime temperature control for heating of the system from increase of switching velocity. We experiment the velocity and temperature control of the proposed high-voltage static var compensator in the real environment and verify the performance of the proposed system by applying in the real field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.452-456
• /
• 2010

SIR based beam switching in distributed controlled cellular systems is proposed to reduce intercell interference. Compared with Random beam switching that beam switching pattern is randomly selected and cannot avoid beam collision between neighboring cell, SIR based beam switching update its switching pattern based on SIR report from mobile. Neighboring cells independently update their switching patterns and the updated patterns converge to the patterns that minimize beam collision. We shows SIR base beam switching has 20% gain compared with random beam switching in two neighboring cell model.