• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.137-139
• /
• 2005

본 논문에서는 30W급 스위칭형 직류전원장치 (Switching Mode Power Supply : SMPS)에 준공진형 프라이 백 스위칭 레귤레이터(quasi-resonant flyback switching regulator)를 적용하여 방사노이즈(radiation-noise)를 억제한 사례에 대하여 설명하고 있다. 기존의 PI사(社)의 TOP IC 시리즈$^{[1]}$와 같이 보편적으로 사용되고 있는 일명, 하드 스위칭(hard-switching)형 레귤레이터를 사용할 경우, 고속 스위칭시에 스위칭 손실(switching loss)과 스위칭 노이즈(switching noise)가 발생한다. 이로 인하여 SMPS의 발열에 따른 효율저화와 방사 노이즈에 의한 전파방해 등이 문제점이 된다. 본 논문에서는 일본의 Sanken사(社)에서 개발/시판중인 준공진형 스위칭 레귤레이터인 STR-F6000 IC 시리즈$^{[2]}$를 이용하여 프라이백 SMPS를 구성하여 방사노이즈를 저감하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.76-78
• /
• 2020

본 논문에서는 부스트 프리레귤레이터가 통합된 새로운 고효율 고정-주파수 LLC 공진형 컨버터를 제안한다. 기존 부스트 프리레귤레이터가 사용된 2단-구조의 컨버터는 연속적인 입력전류 및 넓은 전압이득 범위를 가져 태양광 및 연료전지에 적합한 토폴로지이다. 하지만, 부스트 프리레귤레이터 단에서 하드 스위칭으로 인한 큰 스위칭 손실, 큰 다이오드 도통 손실이 발생하여 낮은 효율을 갖는 문제가 발생한다. 따라서 이를 해결하기 위해, 제안된 회로는 부스트 프리레귤레이터를 통합시킨 새로운 구조를 사용하여 모든 스위치의 영전압 스위칭을 달성하고, 다이오드를 소거하였다. 따라서 제안된 회로는 높은 효율을 갖는다. 제안된 회로의 효용성을 증명하기 위해, 24-32V 입력전압과 12-16V(200W)출력에서 실험이 진행되었다.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.260-264
• /
• 2015

In this paper, we propose mode selector for operating a switching system and regulator of linear system to detect the load current. The proposed mode selector can be a mode switching of linear system and switching system, and it has been proposed to compensate for the disadvantages of regulator of switching system with low efficiency in light load conditions. At light load conditions, the mode selector is possible to provide a high efficiency in light load condition by switching the mode to the regulator of linear system. The mode selector was designed to using a Dongbu Hitek $0.18{\mu}m$ CMOS process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.758-761
• /
• 2003

We have designed 5 V/500 mA transless type power module by using semiconductor switching technique, key technique for small size of power supply system. The power module is suitable to a small sized electronic system using a single power supply. It is composed of switching circuit using voltage drop type chopper method, control circuit, voltage detect circuit, and constant voltage circuit, and is fabricated to hybrid-IC type. The switching regulator power supply circuit, designed in this study, has satisfied the electrical characteristics of 5 V/500 mA transless type power module.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.399-402
• /
• 1988

In this paper, the relationship between stability and gain band-width product (GB) is clear ed by evaluating the feedback gain in the buck-boost switching regulator. Especially, considering the effect of the right-half-plane pole on the stability, we found available region of GB on the stability with the one pole compensation for the feedback circuit.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.235-239
• /
• 1989

This paper investigated the effect of right half plane zero on the transient response in the buck-boost DC-DC converter. And it is clarified that the damping ratio decreases gradually by increases of the feedback loop gain and the regulation system of the converter becomes unstable. From the result, we obtained the stability region about the duty ratio and the output current by evaluating the feedback loop gain.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.401-404
• /
• 1989

In this paper an optimal LQ controller is designed for the output characteristic improvement of buck-type switching regulators. State-space averaging method is adopted for modelling of switching regulators. The LQ controller is derived via an unified operator form for the application to both continuous-time and discrete-time control systems. Some design parameters of the LQ controller are chosen through a computer simulation and the LQ controller is implemented by analog circuits.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.514-515
• /
• 2010

본 논문은 다중출력 스위칭 모드 전원 공급장치의 경부하 상태에서 2차측의 부하 전압안정을 위하여 일반적으로 사용하는 선형 전압조정기의 제어기 내 부하전류정보를 이용하여, 대기모드를 구현함으로써 시스템의 효율을 향상 시켰다. 제안된 회로의 동작원리를 설명하고 이를 시뮬레이션을 통하여 확인하고 20W급 하드웨어 프로토타입을 이용하여 검증하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.485-490
• /
• 2012

In this paper, driver circuit of LED lights for ships is designed and implemented to replace conventional lights with filament which have short life time due to vibration of ships. The driver of LED module is switching circuit without transformer to reduce volume and cost. As switch circuit controls input 220 VAC with PWM, LED module is reliably driven. Power factor is improved by using valley-fill PFC compensation circuit which is handled to pulse current of switching circuit. Serial-parallel LED circuit is applied to reduce change period of lights of long-term navigation ships. Array of serial-parallel can operate even if some of LEDs is damaged. It is suitable for ships that power consumption and power factor of lights including developed drive circuit have 39Watt and 0.925 respectively.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.428-431
• /
• 2016

Power semiconductor devices had been producted with bipolar only processes, but Bipolar-CMOS-DMOS(BCD) processes have been adapted recently to fabricate these devices since most foundry companies have provided BCD processes instead of Bipolar only processes. In this study, Regulator and OP Amp are used as most popular design IPs and BCD processes for the designing are converted from bipolar only processes. Power Switching Sensor(PSS) ICs are designed specifically and fabricated on a silicon chip. The operation results of the packaged chip show the good matching with test results of the simulation.