• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.57-66
• /
• 2011

The current trend of the handover authentication delay time is gradually increased according to the interworking between 3G cellular network and WLANs. Therefore, authentication mechanism minimized in delay is required to perform the seamless handover and support the inter-subnet and inter-domain handover. In this paper, we propose a novel pre-authentication scheme based on the fast channel switching which directly performs the authentication with the next access point in advance. In addition, the proposed scheme is efficient in the inter-domain handover and can be easily implemented in current WLANs since it just modifies the client side of user. To analysis and evaluate our scheme, we compare the packet loss ratio and the delay time with the two standard 802.11 authentication schemes. The analytical results show that our scheme is approximate 10 times more effective than the standard schemes in packet loss and the delay time is minimized down to 0.16 msec.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.142-148
• /
• 2006

In this paper, authors propose a novel step-up AC-DC converter operated with power factor correction (PFC) and with high efficiency. The proposed converter behaves with discontinuous current control (DCC) of input current. The input current waveform in the proposed converter is got to be a discontinuous sinusoid form in proportion to magnitude of at input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity and the control method is simple. In the general DCC converters, the switching devices are turned-on with the zero current switching (ZCS). But turn-off of the switching devices is done at the maximum current. To achieve a soft switching at turn-off, the proposed converter uses a new partial resonant circuit, which results in the very low switching loss and the high efficiency of converter.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.255-263
• /
• 2000

A multistage interconnection network is a suitable class of interconnection architecture for constructing large-scale multicomputers. Broadcast and multicast communication are fundamental in supporting collective communication operations such as reduction and barrier synchronization. In this paper, we propose a new multicast technique in wormhole-switched bidirectional multistage banyan networks for constructing large-scale multicomputers. To efficiently support broadcast and multicast with simple additional hardware without deadlock, we propose a two-phase multicast algorithm which takes only two transmissions to perform a broadcast and a multicast to an arbitrary number of desired destinations. We encode a header as a cube and adopt the most upper input link first scheme with periodic priority rotation as arbitration mechanism on contented output links. We coalesce the desired destination addresses into multiple number of cubes. And then, we evaluate the performance of the proposed algorithm by simulation. The proposed two-phase multicast algorithm makes a significant improvement in terms of latency. It is noticeable that the two-phase algorithm keeps broadcast latency as efficient as the multicast latency of fanout 2^m where m is the minimum integer satisfying $2^m{\geq} {\sqrt{N}}$ ( N is a network size).

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.448-457
• /
• 2017

In this paper, for high speed railway propulsion systems, a single phase PWM Converter using discontinuous PWM (DPWM) was investigated. The conventional PWM Converter uses a low frequency modulation index of less than 10 to reduce switching losses due to high power characteristics, which results in low control frequency bandwidth and requires an additional compensation method. To solve these problems, the DPWM method, which is commonly used in three phase PWM Inverters, was adopted to a single phase PWM Converter. The proposed method was easily implemented using offset voltage techniques. Method can improve the control performance by doubling the frequency modulation index for the same switching loss, and can also bring the same dynamic characteristics among switches. Proposed DPWM method was verified by simulation of 100 kW PWM converter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.72-84
• /
• 2005

Optical burst switching networks usually employ one-way reservation by sending a burst control packet with a specific offset time, before transmitting each data burst Same. Due to such a Property, burst-contentions occur when multiple bursts contend for the same wavelength in the same output link simultaneously in a node, leading to burst losses, eventually degrading the quality of service. Therefore, in this paper, we propose a dynamic routing algorithm using minimum local state information in order to decrease burst-contentions. In this proposed scheme, if burst loss rate exceeds a threshold value at a certain node, a new alternative routing path is chosen according to burst priority and location of burst generation, which enables the contending bursts to detour around the congested link. Moreover, for reducing the effect of sending bursts on the primary path due to the alternative path, we also apply a minimum path-cost based routing on link-cost concept. Our simulation results show that proposed scheme improves the network performance in terms of burst loss probability and throughput by comparing with conventional one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1197-1206
• /
• 2002

Recently, the research on the construction of optical Internet backbone networks using WDM has been actively progressed. In this paper, we propose the offset based service-differentiation scheme in optical burst switching (OBS) networks. We classify the services into two classes; high class and low class. The proposed scheme decides the offset time of high class so as to satisfy the required burst loss rate (BLR) of services according to the service-differentiation ratio (SDR). The SDR may be set depending on the environment of OBS network and user's requirements, our scheme decides the BLR of high class by using the required SDR and conservation law. Finally, we use the offset time decision (OTD) algorithm to determine the offset time of high class. The proposed scheme is evaluated through simulation. The result of simulation is compared with that of analysis to verify the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.793-805
• /
• 2003

In OBS (Optical Burst Switching) networks which decouple the burst from its header, the fault of a fiber link can lead to the failure of all the light-path that traverses the fiber. Because each light-path is expected to operate at a rate of a few Gbps by using WDM (Wavelength Division Multiplexing) technology, any failure may lead to large data loss. Therefore, an efficient recovery scheme must be provided. In this paper, we analyze network utilization and BCP (Burst Control Packet) loss rate according to each link failure by applying the conventional restoration schemes in OBS networks. And through these simulation results, an ASPR scheme is proposed improve the fault management scheme in terms of recovery time and throughput. Finally, We compare the performance of our proposed scheme with that of the conventional one with respect to burst loss rate, resource utilization and throughput by OPNET simulations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.469-477
• /
• 2003

This paper proposes a Carrier-Rotation (CR) PWM technique that is a new solution for the voltage unbalancing problem of flying capacitors in the Flying Capacitor Multi-level Inverter (FCMI). The proposed technique equalizes the utilization of phase leg voltage redundancies corresponding to the charging and the discharging state of individual flying capacitors during each switching period of all the switches. Therefore, the charging and the discharging quantity of flying capacitors are equal, which makes the average variation of flying capacitor voltages become zero and keeps their voltage stable during minimum specified period. It also has the reduced harmonic contents of output voltage and the same switch utilization since all the carrier signals are in phase and the switching frequency of each switch is identical. The proposed technique is analyzed precisely in flying capacitor 3-level inverter and then it has expanded to the FCMI (N-level, N>3). Experimental results on the laboratory prototype flying capacitor 3-level inverter confirm the validity of the proposed technique.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.524-525
• /
• 2015

본 논문은 계통연계형 소용량 태양광 인버터에 적용된 AFD(Active Frequency Drift) 기반의 단독 운전 검출 기법을 제안한다. 태양광 시스템에 일반적인 인버터 토폴로지를 사용한 경우, 무효전력 주입을 이용하여 단독운전 검출이 가능하다. 하지만 무효전력의 제어가 불가능한 인버터를 사용한 경우에는 기존의 무효전력을 이용하는 단독운전 검출기법을 사용할 수 없다. 무효전력의 제어가 불가능한 인버터 토폴로지에 새로운 스위칭 기법을 적용하면 무효전력을 주입한 효과를 얻을 수 있고, 이를 통해 기존의 AFD 방식을 응용하여 단독운전 검출이 가능한 새로운 검출기법을 제안하였다. 제안하는 검출기법은 기존의 AFD 방식보다 인버터 출력전류의 THD (Total Harmonic Distortion)를 개선할 수 있는 장점이 있다. 제안하는 기법의 성능을 시뮬레이션을 통해 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.205-206
• /
• 2008

고전석인 슬라이딩 모드 제어는 시스템의 동특성에 관계없이 시스템의 상태를 설계자의 의도대로 목적에 맞게 제어할 수 있지만 시스템의 본질적인 한계로 인해 제어입력에서 채터링이라는 불가피한 요소를 포함하게 된다. 본 논문에서는 이산 시간 시스템에서 고주파 성분으로 인한 스위칭 입력의 부정적인 영향인 채터링을 감소시키기 위해 연속 슬라이딩 모드 제어기법을 제안한다. 제안된 기법은 PZT 나노 스테이지에서 슬라이딩 모드의 강인성과 만족스러운 시스템 제어성능을 보여준다.