• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.466-474
• /
• 2014

This paper presents the line contention avoidance experiments with an optical switch, which was selected based on the comparison analysis and evaluation of the various characteristics. For example, the function, structure, strengths and weaknesses of the optical switches. After considering the nonblocking, modularity, upgrade ability and optical power loss of the several kind of the switch fabrics, a switch was selected. The selected switch fabric by using wavelength converters was controlled to avoid contention of the optical lines. In this experiment shows an example of three cases. As a result of this experiment, optical signal shows a changed peek of optical power in output. By showing a peak it confirms that the contention was avoided. By analyzing of changed optical power according to the channel setting time and release time to control of the switch could be determined. If this analysis applied to the network design, economical and efficient structures can be formed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.364-371
• /
• 2007

In this paper, the design and implementation of high-power PIN diode switch modules and high-speed switch driver circuits are presented for Wibro base stations. To prevent isolation degradation due to parasitic inductances of conventional packaged PIN diodes and to improve power handling capabilities of the switch modules, bare diode chips are used and carefully placed in a PCB layout, which makes bonding wire inductances to be absorbed in the impedance of a transmission line. The switch module is designed and implemented to have a maximum performance while using a minimum number of the diodes. It shows an insertion loss of ${\sim}0.84\;dB$ and isolation of 80 dB or more at 2.35 GHz. The switch driver circuit is also fabricated and measured to have a switching speed of ${\sim}200\;nsec$. The power handling capability test demonstrates that the module operates normally even under a digitally modulated 70 W RF signal stress.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.738-748
• /
• 2002

In this paper, a performance evaluation model of the Multistage Interconnection Network(MIN) with the multiple-buffered crossbar switches is Proposed and examined. Buffered switch technique is well known to solve the data collision problem of the MIN. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. The performance of the multiple-buffered${\alpha}{\times}{\alpha}$ crossbar switch is analyzed. Steady state probability concept is used to simplify the analyzing processes, Two important parameters of the network performance, throughput and delay, are then evaluated, To validate the proposed analysis model, the simulation is carried out on a Baseline network that uses the multiple buffered crossbar switches. Less than 2% differences between analysis and simulation results are observed. It is also shown that the network performance is significantly improved when the small number of buffer spaces is given. However, the throughput elevation is getting reduced and network delay becomes increasing as more buffer spaces are added in a switch.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.157-165
• /
• 2006

This paper proposes a new output-buffered multicast ATM switch with tandem crosspoints switching fabric, named the MTCOS(Multicast Tandem Crosspoint Output-buffered Switch). The MTCOS consists of multiple simple crosspoint switch fabrics, named TCSF(Tandem Crosspoint Switch Fabric) , and concentrated output buffers for efficient multicasting. The TCSF resolves the cell delay deviation problem which the self-routing crossbar switches inherently have. Further, it offers multiple concurrent pathes from one input to multiple output ports. It also provides multi-channel switching by easy software configuration and has several desirable characteristics such as scalability, high Performance, and modularity. A shared traffic concentration and output queuing strategies of the MTCOS results in lower cell loss as well as lower cell delay time over a wide range of multicast traffic. Furthermore, it has lower hardware complexity than that of the SCOQ and Knockout multicast switch to achieve the same Knockout concentration rate as the conventional switches. It is shown that the proposed switch can be easily applied to design high performance for any multicast traffic by analytic analysis and computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.209-216
• /
• 2003

In this paper, we propose ATM switch structure including AAL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of AAL cells which consist of AAL type 1, AAL type 2, AAL type 3/4, and AAL type 5 cells. We propose two switch fabric methods; One supports the AAL type 2 cell processing per input port, the other global AAL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a merit for easy implementation and extensibility. The proposed ATM switch fabric is widely applicable to mobile communication, narrow band services over ATM network and wireless ATM as well as general ATM switching fabric.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.35-45
• /
• 1999

This paper presents an interconnection network for load balancing on a multimedia server and proposes a simple probabilistic model of the interconnection network for analysing the traffic characteristics. Because the switch uses deflection algorithm for routing, the traffic load on the switch seriously affects deflection probability. In this paper, we trace the deflection probability as a function of the traffic load according to the model. By comparing the result with the empirical result, we prove that the model is useful for estimating the deflection probability and traffic saturation point against the amount of packets getting into the switch.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1745-1748
• /
• 2005

클러스터 기반 웹 시스템에서 클라이언트의 계층별 요청 형태에 따라 차별화된 서비스를 제공하려는 시도가 활발하다. 서비스 제공자와 클라이언트간의 서비스 계약 조건(SLA: Service Level Agreement)을 만족시키기 위해, 웹 스위치 단계에서 클라이언트의 서비스 요청의 내용을 파악한 후 동적으로 서버에 요청처리 작업을 할당함으로써, 클라이언트 계층별 SLA 의 제공이 가능하다. 하지만, 모든 클라이언트의 요청은 웹 스위치를 통하여 각 서버에 분배되기 때문에, 웹 스위치가 내부적 결함이나 외부의 침입에 의해 정상적인 서비스를 제공하지 못하는 경우, 웹 시스템 서비스의 다운을 초래 할 가능성이 높다. 본 논문에서는, 웹 스위치의 내부적인 결함은 물론 외부의 악의적인 공격(예, 침입, 바이러스)으로 인하여 웹 스위치에 문제가 발생하는 경우 대기하고 있는 백업(backup) 웹 스위치로 대치하여 서비스를 계속 수행함으로써, SLA 가 고려된 웹 시스템의 가용도(Availability)를 높일 수 있는 구조를 제안하였고, 마코브(Marcov) 분석 및 실험을 통해 시스템 가용도와 SLA 척도를 정량적으로 평가하였다.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.15-23
• /
• 2008

This paper proposes the new structural MOQ(Multiple Input/Output-Queued) switch which guarantees QoS while maintaining high efficiency and deals with the Anti-Empty algorithm which is new arbitration algorithm to be used for the proposed switch. The new structure of the proposed switch based on MIQ, MOQ is designed to have the same buffer speed as the external line speed. Also, the proposed switch makes it possible to remove the weak point of existing methods and introduces the new method of the MOQ operation to support QoS. Therefore, this switch is equal to the Output Queued switch in efficiency and delay, and guarantees the high-speed switching supporting QoS without cell loss.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2083-2085
• /
• 2000

우리나라의 전열추진기술 프로그램에 따라 8�V의$\square$ $\square kJ$ 커패시터 뱅크 모듈이 제작되고 있다. 한 �V의 모듈은 6개의 22kV, 50kJ 자체 고장복구 커패시터와 주 스위치로서 각 모듈에 하나씩의 RVU-43 스위치를 사용하였다. 또 각 모듈에는 요구되는 전류 파형의 폭을 얻기 위하여 $20\sim160\;\mu\;H$의 펄스 파워 인덕터를 사용하였고 3개의 병렬 크로우바 스택을 적용하였다. 여러 종류의 스위치가 검토되었으며 그 중에서 펄스 파워 싸이리스터보다 가격이 싸면서 전류영점에서 차단기능이 있는 RVU-43 스위치가 선정되었다. 선정된 스위치(정격 25kV, 200kA, 120 Coulomb)에 대하여 자기방전 전압, 최소 동작전압, 동작 지연시간, 역전류 차단성능, 스위치 손실에 관한 특성시험을 행하고 그 결과를 보고한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1198-1206
• /
• 2011

In this paper, we proposed a home network integrated dimmer switch using Z-wave Mesh Network. The dimmer switch come with wired and wireless network-based intelligent lighting switch that can be installed in a apartments with home network technologies. This switch is ease to install and operate. Furthermore, it provide power saving through efficient control of light using motion detect sensor and light intensity sensor. In order to evaluate the performance of our developed home network integrated dimmer switch, we performed a load performance test and from our result, it showed excellent performance in terms of lighting control and communication speed.