• 제목/요약/키워드: 스월 각

검색결과 62건 처리시간 0.027초

분무 조건에 따른 기체 중심 스월 동축형 분사기의 분무 특성 (Spray Characteristics of Gas-Centered Swirl Coaxial Injectors according to Injection Conditions)

  • 박구정;이정호;이인규;윤영빈
    • 한국분무공학회지
    • /
    • 제19권4호
    • /
    • pp.167-173
    • /
    • 2014
  • The spray characteristics of Gas-Centered Swirl Coaxial Injector was investigated that there were different characteristics with or without gas flow. As gas flow was accelerated, the momentum of gas was transferred to the momentum of liquid in the low liquid Reynolds number. Therefore, the axial velocity of liquid was increased and the measured value was smaller than without gas flow. However, in the high momentum flux ratio, the momentum transfer hardly occurred and the results had constant values. As the recess length was increased, the mixing area of gas and liquid also was increased, the results were decreased.

엔진 흡입포트 시스템 유동특성 규명을 위한 스월-텀블 합성효과에 관한 연구 (A Study on Combined Effects between Swirl and Tumble Flow of Intake Port System in Cylinder Head)

  • 윤정의
    • 한국자동차공학회논문집
    • /
    • 제7권8호
    • /
    • pp.76-82
    • /
    • 1999
  • The object of this study is to find new evalution index for in-cylinder flow characteristics insteady of current swirl, tumble coefficient using steady flow test rig on intake port system. To this end, port flow rig test was conducted on DOHC head varying intake valve lift respectively. Finally combination angular coefficient and inclination angle were introduced as new evaluation index for in-cylinder angular flow characteristics.

  • PDF

스월분무특성에 미치는 점성의 영향 (The Effect of Viscosity on the Spray Characteristics of Pressure Swirl Atomizer)

  • 윤석주;조대진
    • 한국분무공학회지
    • /
    • 제4권4호
    • /
    • pp.24-29
    • /
    • 1999
  • In the pressure swirl atomizer, the liquid is injected through tangential passages into a swirl chamber, from which it emerges with both tangential and axial velocity components to form a thin conical sheet at the nozzle exit. This sheet rapidly attenuates, finally disintegrating into ligaments and then drops. The purpose of this study is to measure the spray characteristics according to variation of viscosity of the spray produced by the pressure swirl atomizer. The nozzle tested here were especially designed for this investigation. The discharge coefficient is determined by measuring the volume flow rate with a flow meter and the cone angle of the liquid sheets issuing from the nozzle is obtained from series of photographs of the sheet for various liquid viscosity and injection pressure. And mean drop size is measured by image processing method. It is found that the geometrical characteristics of the nozzle and the variation of viscosity were the influential parameters to determine the spray characteristics such as the cone angle, discharge coefficients and SMD.

  • PDF

습식 에칭공정에서 노즐 형상에 따른 분무특성 분석을 통한 에칭특성의 향상에 관한 연구 (A Study on Improvement of Etching Characteristics by Spray Characteristics Analysis with Nozzle Geometries in Wet Etching Process)

  • 정지원;김덕줄
    • 대한기계학회논문집B
    • /
    • 제28권7호
    • /
    • pp.842-849
    • /
    • 2004
  • The objective of this work is to study the improvement of etching characteristics in wet etching process. The etching characteristics such as etching factor were investigated under different etching conditions and compared with the spray characteristics. The spray characteristics of nozzle with different geometries such as swirler angle and swirl chamber aspect ratio were analyzed by using PDA system to predict the effect of the spray characteristics on the etching factor. The swirler angles were 49,5$^{\circ}$, 63$^{\circ}$ and 76.5$^{\circ}$. The swirl chamber aspect ratios were 1.2, 1.6 and 2.0. It was found that the etching factor was correlated with the spray characteristics and also the smaller swiller angle, the larger etching factor became.

가스메탄/액체산소를 추진제로 하는 인젝터 설계 및 설계 검증 (Design and Verification of a Injector using Gas Methane and LOx as Propellants)

  • 장지훈;민지홍;이양석;고영성;김선진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.877-880
    • /
    • 2011
  • 기체메탄/액체산소를 추진제로 사용하는 동축 스월/전단형 인젝터를 설계 및 제작하였다. 각 추진제의 오리피스 개수와 유입오리피스 후단의 형상 등은 상용 해석프로그램인 Fluent를 이용하여 유동해석을 수행한 결과를 바탕으로 결정하였다. 설계/제작된 인젝터는 수류시험을 통해 차압에 따른 설계유량을 측정하였고, 패터네이터를 이용하여 유량분포의 균일성을 확인하였다. 측정결과 설계 유량의 약10% 내외의 차이를 보였으며, 산화제 인젝터의 분무각은 $66^{\circ}$로 측정되었다.

  • PDF

가스메탄/액체산소를 추진제로 하는 인젝터 설계 및 설계 검증 (Design and Verification of a Injector using Gas Methane and LOx as Propellants)

  • 장지훈;민지홍;이양석;고영성;김선진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.658-661
    • /
    • 2011
  • 기체메탄/액체산소를 추진제로 사용하는 동축 스월/전단형 인젝터를 설계 및 제작하였다. 각 추진제의 오리피스 개수와 유입오리피스 후단의 형상 등은 상용 해석프로그램인 Fluent를 이용하여 유동해석을 수행한 결과를 바탕으로 결정하였다. 설계/제작된 인젝터는 수류시험을 통해 차압에 따른 설계유량을 측정하였고, 패터네이터를 이용하여 유량분포의 균일성을 확인하였다. 측정결과 설계 유량의 약 10% 내외의 차이를 보였으며, 산화제 인젝터의 분무각은 $66^{\circ}$로 측정되었다.

  • PDF

가스터빈 연소기의 스월컵 형상이 분무특성에 미치는 영향 (Effect of Swirl Cup Geometry on Spray Characteristics in Gas Turbine Engine)

  • 김동준;박종훈;고현석;윤영빈
    • 한국추진공학회지
    • /
    • 제6권2호
    • /
    • pp.29-36
    • /
    • 2002
  • 두 번째 벤츄리 끝단 각도가 가스터빈 연소기의 유동 및 분무 특성에 미치는 영향을 이해하기 위해 스월 vane 형태의 2중 스월컵을 장착한 산업용 가스터빈 엔진에 대해 두 번째 벤츄리 끝단 각이 수렴형, 직선형, 발산형의 세 경우에 대해 실험을 수행하였다. 두 번째 벤츄리 끝단 각도의 변화가 가스터빈 연소기의 재순환 영역의 위치, 크기 및 형상 등의 유동 특성과 연료 액적 분무 형태를 크게 변화시킴을 확인 할 수 있었다. 발산형 벤츄리에서는 내부 재순환 영역이 점화가 일어나는 지점에서 가까운 곳에서 형성되므로 화염의 안정화에는 탁월할 것으로 판단되지만, 수렴형 벤츄리에서 가장 작고 균일한 크기의 액적들이 측정되었고, 내부 재순환 영역이 연소기 내에 길게 형성된 점으로 고효율, 저공해 연소기로는 수렴형 벤츄리의 경우가 적합하리라 판단된다.

흡기스월 변화에 따른 GDI 기관의 배기특성에 관한 연구 (A Study on Characteristics of Emissions in GDI Engine with Intake Swirl Variation)

  • 채재우;차민혁;이상만
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2000년도 추계학술대회 논문집
    • /
    • pp.207-209
    • /
    • 2000
  • GDI(Gasoline Direct Injection) 기관은 전체적으로 희박한 영역에서 작동되기 때문에 저연비, 고출력화 및 배기유해가스 저감에 매우 유리하다. GDI 기관에 있어서 희박연소를 실현하고자 한 연구는 공기유동 강화방식, 연소실 형상의 최적화, 부실식 연소, 분사된 연료의 미립화, 흡기포트의 형상 변화, 운전조건 변화에 따른 분사전략의 변화 등 그 방식도 다양하며,$^{<1-5>}$ 최근엔 이러한 각 방식들의 장점들을 적절히 활용하고 이에 따라 각기 고유한 모델을 채택하여 접근하려는 시도를 하고 있다$^{<6>}$ . (중략)

  • PDF

스월 인젝터의 작동조건 및 인젝터 형상에 따른 분무특성 (The Effects of Operating Conditions and Injector Geometry on the Spray Characteristics of Swirl Injectors)

  • 김동준;임지혁;한풍규;윤영빈
    • 한국분무공학회지
    • /
    • 제9권1호
    • /
    • pp.21-29
    • /
    • 2004
  • The flow characteristics of a swirl injector were investigated with the variation of the flow condition and geometric dimensions, such as orifice length for considering the viscous effect and tangential entry port area for considering the swirl intensity. The liquid film thickness strongly influencing on the formed drop size of the spray was measured using a new technique. The film thickness measurement technique proposed here, used the attenuation of fluorescence signal near the injector exit. The breakup length that is important for the flame location as well as the spray cone angle which influences on the ignition performance was measured using a backlit stroboscopic photography technique. From the experimental results, it is found that an increase in injection pressure decreased the film thickness and breakup length, and also enlarged the spray cone angle. A decrease in orifice length and tangential entry port area has a similar tendency of thinner film thickness, shorter breakup length and larger spray cone angle. In the present study, we proposed empirical models of the flow characteristics of the swirl injectors.

  • PDF

축소형 액체 로켓엔진에서 인젝터 배열과 충돌각에 따른 성능 및 연소특성의 수치적 해석 (Numerical Studies of the Effect of Performance and Combustion Characteristics on Injector Arrangement and Impinging Angles in Sub-scale Liquid Rocket Engine)

  • 문윤완;김영목
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2000년도 제15회 학술강연회논문초록집
    • /
    • pp.5-5
    • /
    • 2000
  • 이 연구의 목적은 한국항공우주연구소가 개발 중인 액체추진제 로켓엔진의 축소형 엔진에 대하여 인젝터 배열의 변화가 성능 및 연소특성에 미치는 영향을 분석하는데 있다. 인젝터의 배열방식에 따라 방사형(radial) 및 직교형(H-type) 인젝터를 연구대상으로 하였으며 충돌각의 변화에 2차원 및 3차원 해석을 수행하였다. 로켓엔진에는 스월러 인젝터를 고려하지 않았기 때문에 인젝터의 배열 및 충돌 각은 엔진성능뿐만 아니라 연소특성에도 중요하게 영향을 미치는 인자가 된다.(중략)

  • PDF