• Journal of Korea Water Resources Association
• /
• v.56 no.5
• /
• pp.325-336
• /
• 2023

In August 2022, even though flood damage occurred in the metropolitan area due to heavy rain, drought warnings were issued in Jeolla province, which indicates that the regional drought is intensified recent years. To cope with regarding intensified regional droughts, many studies have been conducted to identify spatial patterns of the occurrence of meteorological drought, however, case studies of spatial clustering for water shortage are not sufficient. In this study, using the estimations of water shortage in the Han River Basin in 2030 of the Master Plans for National Water Management, the spatial characteristics of water shortage were analyzed to identify the hotspot areas based on the Local Moran's I and Getis-Ord Gi^*, which are representative indicators of spatial clustering analysis. The spatial characteristics of water shortage areas were verified based on the p-value and the Moran scatter plot. The overall results of for three anayisis periods (S0(1967-1983), S1(1984-2000), S2(2001-2018)) indicated that the lower Imjin River (#1023) was the hotspot for water shortage, and there are moving patterns of water shortage from the east of lower Imjin River (#1023) to the west during S2 compared to S0 and S1. In addition, the Yangyang-namdaecheon (#1301) was the HL area that is adjacent to a high water shortage area and a low water shortage area, and had water shortage pattern in S2 compared to S0 and S1.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.224-239
• /
• 2023

C-ITS (Cooperative-Intelligent Transportation System) refers to user safety-oriented technology and systems that provide forward traffic situation information based on a two-way wireless communication technology between vehicles or between vehicles and infrastructure. Since the Daejeon-Sejong pilot project in 2016, the C-ITS infrastructure has been installed at various locations to provide C-ITS safety services through highway and local government demonstration projects. In this study, a methodology was developed to verify the effectiveness of the warning information using individual vehicle data collected through the Gwangju Metropolitan City C-ITS demonstration project. The analysis of the effectiveness was largely divided into driving behavior impact analysis and environmental analysis. Compliance analysis and driving safety evaluation were performed for the driving impact analysis. In addition, to supplement the inadequate collection of Probe Vehicle Data (PVD) collected during the C-ITS demonstration project, Digital Tacho Graph ( DTG ) data was additionally collected and used for effect analysis. The results of the compliance analysis showed that drivers displayed reduced driving behavior in response to warning information based on a sufficient number of valid samples. Also, the results of calculating and analyzing driving safety indicators, such as jerk and acceleration noise, revealed that driving safety was improved due to the provision of warning information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.200-215
• /
• 2023

With the rapid advance of autonomous driving technology, the related vehicle market is experiencing explosive growth, and it is anticipated that the era of fully autonomous vehicles will arrive in the near future. However, along with the development of autonomous driving technology, questions regarding its safety and reliability continue to be raised. Concerns among technology adopters are increasing due to media reports of accidents involving autonomous vehicles. To promote the improvement of the safety of autonomous vehicles, it is essential to analyze previous accident cases and identify their causes. Therefore, in this study, we aimed to analyze the factors influencing the severity of autonomous vehicle accidents using previous accident cases and related data. The data used for this research primarily comprised autonomous vehicle accident reports collected and distributed by the California Department of Motor Vehicles (CA DMV). Spatial information on accident locations and additional traffic data were also collected and utilized. Given that the primary data used in this study were accident reports, a Poisson regression analysis was conducted to model the expected number of accidents. The research results indicated that the severity of autonomous vehicle accidents increases in areas with low lighting, the presence of bicycle or bus-exclusive lanes, and a history of pedestrian and bicycle accidents. These findings are expected to serve as foundational data for the development of algorithms to enhance the safety of autonomous vehicles and promote the installation of related transportation infrastructure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.689-693
• /
• 2023

Domestic bridges with a service life of more than 30 years are expected to account for approximately 54% of all bridges within the next 10 years. As bridges rapidly deteriorate, it is necessary to establish an appropriate maintenance plan. Recent domestic and international research have focused on the integration of BIM to digitize bridge maintenance information and then enhance accessibility and usability of the information. Accordingly, this study developed a BIM-FEM interoperability algorithm for bridge decks to convert maintenance information into data and efficiently manage the history of maintenance. After creating an initial crack BIM based on an exterior damage map, bridge specification and damage information were linked to a numerical analysis that performs damage analysis considering damage scenarios and design loads. The spread of cracks obtained from the analysis results were updated into the BIM. Based on the damage spread information on the BIM, an automated technology was also developed to assess both the current and future condition ratings of the bridge deck. This approach can enable an efficient maintenance of the deck using the history data from bridge inspection and diagnosis as well as future information on cracks and defects. The expected early detection and prevention would ultimately improve the lifespan and safety of bridges.

• Journal of Korea Water Resources Association
• /
• v.57 no.1
• /
• pp.45-58
• /
• 2024

Drought risk is expected to increase as the frequency, intensity, and duration of droughts increase due to climate change. Drought risk is related to not only hydro-meteorological factors, but also water supply and demand. Recently, along with climate change, socioeconomic factors have also been recognized to increase drought risk. Therefore, it is necessary to outlook the drought risk considering various conditions for coping with future extreme droughts in a timely manner. In addition, considering various drought scenarios help reduce the uncertainty in future drought outlook. In this study, drought scenarios considering climate change scenarios, population, and water demand were created to outlook drought risk for 160 administrative districts in Korea, then new levels of drought risk were assigned based on the results of drought risk outlook to suggest drought management measures. The results showed that the drought risk will increase in the future in 2020, 2025, and 2030, compared to past. Especially the drought risk is likely twice as high in 2030 under the baseline and high scenarios. Applying the drought outlook results from this study to the new methodology for setting the risk levels shows that most regions are in Response (V) in 2020 and 2030 for baseline and high scenarios.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.89-102
• /
• 2024

The recent advancements in Smart City and Digital Twin technologies have highlighted the critical role of integrating GIS and BIM in urban planning and construction projects. This integration ensures the consistency and accuracy of information, facilitating smooth information exchange. However, achieving interoperability requires standardization and effective project integration management strategies. This study proposes interoperability solutions for the integration of GIS and BIM for managing various projects. The research involves an in-depth analysis of the IFC schema and data structures based on the latest IFC4 version and proposes methods to ensure the consistency of reference point coordinates and coordinate systems. The study was conducted by setting the EPSG:5186 coordinate system, used by the National Geographic Information Institute's digital topographic map, and applying virtual shift origin coordinates. Through BIMvision, the results of the shape and error check coordinates' movement in the BIM model were reviewed, confirming that the error check coordinates moved consistently with the reference point coordinates. Additionally, it was verified that even when the coordinate system was changed to EPSG:5179 used by Naver Map and road name addresses, or EPSG:5181 used by Kakao Map, the BIM model's shape and coordinates remained consistently unchanged. Notably, by inputting the EPSG code information into the IFC file, the potential for coordinate system interoperability between projects was confirmed. Therefore, this study presents an integrated and systematic management approach for information sharing, automation processes, enhanced collaboration, and sustainable development of GIS and BIM. This is expected to improve compatibility across various software platforms, enhancing information consistency and efficiency across multiple projects.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.21-29
• /
• 2024

In the rapidly advancing information society, electronic devices, including smartphones and tablets, are increasingly digitized and equipped with high-performance features such as flexible displays. This study focused on optimizing the manufacturing process for Transparent Conductive Films (TCF) by using the cost-effective conductive polymer PEDOT and transparent substrate PET as alternatives to expensive materials in flexible display technology. The variables considered are production speed (m/min), coating maximum temperature (℃), and PEDOT supply speed (rpm), with surface resistivity (Ω/□) as the response parameter, using Response Surface Methodology (RSM). Optimization results indicate the ideal conditions for production: a speed of 22.16 m/min, coating temperature of 125.28℃, and PEDOT supply at 522.79 rpm. Statistical analysis validates the reliability of the results (F value: 18.37, P-value: < 0.0001, R²: 0.9430). Under optimal conditions, the predicted surface resistivity is 145.75 Ω/□, closely aligned with the experimental value of 142.97 Ω/□. Applying these findings to mass production processes is expected to enhance production yields and decrease defect rates compared to current practices. This research provides valuable insights for the advancement of flexible display manufacturing.

• Journal of the Korean Regional Science Association
• /
• v.40 no.2
• /
• pp.91-106
• /
• 2024

Around the world, many countries experiencing the issue of shrinking cities are continually expanding high-speed rail networks to enhance regional accessibility and address imbalances. This study analyzed the effects of high-speed train operations on the age-specific population migration in South Korean municipalities from 2012 to 2019, taking into account the risk levels of shrinking cities. For this purpose, an analysis was conducted using age-specific net in-migration population as the dependent variable, employing the spatial panel autoregressive model. The research results indicated that the influence of high-speed rail on regional population inflow varies depending on the risk level of shrinking city. In other words, high-speed railway operations had positive effects on population inflow in the capital areas and some major cities, while explained population outflow in the other regions. High-speed railways particularly exerted a significant impact on the inflow of the young and middle-aged population, representing the working age, but this effect was also limited to regions with a low risk of shrinkage. The findings of this study emphasize the importance of considering planned population and industrial attraction when installing high-speed rail with the goal of achieving regional balanced development and mitigating shrinkage. The results of this study also suggest the need for subsequent research to explore factors that positively influence population structure and inflow based on the level of shrinkage risk in each region, as well as the introduction of new policies tailored to the specific situations of each local government.

• Land and Housing Review
• /
• v.15 no.2
• /
• pp.73-87
• /
• 2024

To evaluate the efficiency of commuting patterns, various commuting indicators such as excess commute and commuting potential utilized have been developed and used. It is crucial to calculate these indicators reasonably to reveal the differences in commuting patterns among metropolitan areas and to consider these in the process of formulating commuting policies. However, commuting indicators are generally calculated at the administrative district level, and thus, they are not free from the problem of the modifiable areal unit problem (MAUP). This issue can undermine the rationality of comparing commuting efficiency between metropolitan areas, making it necessary to handle the calculation of commuting indicators carefully. Therefore, this study utilises Monte Carlo Simulation to calculate optimal, actual, and maximum commuting distances, and thereby presents the excess commute and the commuting potential utilized. To apply Monte Carlo Simulation to the context of South Korea, a constrained Monte Carlo Simulation is conducted, where residential and workplace locations used in the simulation are selected based on the actual locations of buildings. The analysis is conducted on 13 metropolitan areas with established metropolitan plans using the 2016 Household Travel Survey data. The commuting indicators calculated through the simulation showed minimal differences compared to the results obtained through conventional methods. The comparison of commuting efficiency among metropolitan areas revealed that even if the degree of spafial balance between residential and workplace locations is similar, the actual commuting patterns can differ significantly. It is suggested that further research considering characteristics such as the area of each metropolitan region will be necessary in the future.