• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.247-248
• /
• 2023

As carbon neutrality becomes an issue around the world, research is actively being conducted to achieve reduction targets for each industry by declaring 2050 carbon neutrality in Korea and implementing the greenhouse gas target management system and emission trading system. The construction industry quantitatively predicts and evaluates carbon emissions by stages through the evaluation of the entire building process, but research on this is insufficient in the case of the construction process. Therefore, as part of the research on predicting and reducing carbon emissions generated at construction sites, data from actual construction sites were collected to analyze the facilities and characteristics of each energy source, and a scenario was proposed to quantitatively predict the use of each energy source.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.98-105
• /
• 2022

It is essential for vertical smart farms that artificially grow crops in an enclosed space to properly utilize air environment facilities to create an appropriate growth environment. However, domestic vertical smart farm companies are creating a growing environment by relying on empirical data rather than systematic methods. Using IoT to create a growing environment based on systematic and precise monitoring can increase crop production yield and maximize profitability. This study aims to construct a monitoring system using IoT and to analyze the cause by demonstrating the imbalance of temperature environment, which is a significant factor in crop cultivation. 1) The horizontal temperature distribution of the multi-layer shelf was measured with different operating methods of LED and air conditioner. As a result, there was a temperature difference of "up to 1.7℃" between the sensors. 2) As a result of measuring the vertical temperature distribution, the temperature difference was "up to 6.3℃". In order to reduce this temperature gap, a strategy for proper arrangement and operation of air conditioning equipment is required.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.311.1-311.1
• /
• 2013

건축물의 유리창을 통하여 유입되는 태양광을 조절하여 냉난방 부하를 절감하고자 사용하는 스마트 윈도우 필름(Electrochromic (EC), Polymer Dispersed Liquid Crystal (PDLC), Suspended Particle Display (SPD))의 방식이 있다. 이러한 스마트 윈도우 필름은 건물 외피에 적용할 때 여름철 태양으로부터 유입되는 열선 차폐만을 목적으로 유리를 완전히 불투명하게 가려버리는 것은 맑고 투명해야하는 창호의 기본적인 용도를 무시한 단편적 기술로서, 스마트 윈도우 필름을 작동하여 투명하게 할 경우 외부에서 열선이 유입되는 문제를 가지고 있다. 스마트 윈도우 필름을 만들 때 필수적으로 사용하는 전극필름으로 플렉서블 기판에 투명 전도막이 형성됨과 동시에 적외선만을 선택적으로 차단하는 기능을 가지는 필름을 제조하여 단열 성능 실험을 실시하였다. 아울러, 스마트 필름의 다양한 적용을 위한 발열 실험도 실시하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6368-6375
• /
• 2015

The goal of this research is to identify the energy planning techniques of Smart Green City and to establish the realized plan through the analysis of Multi-functional Administrative City. For the research, eighteen planning techniques were derived and categorized into three sectors and six basic direction through literature review and Brain-storming analysis considering correlation between three goals of Smart Green City and expectation of planning technique. And Multi-functional Administrative City was analyzed for the current status of application of planning techniques focus on two application aspects. In conclusion, 'Establishing Integrated Management Center for Urban Energy', 'Building Energy Management System', 'Building Automation System', 'Green Transport System', 'Intelligent Transport System', 'Introduction of Eco-friendly Transportation' planning techniques in reduction of building energy consumption sector and green-intelligent transport system sector were identified as important techniques for Smart Green City.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.2
• /
• pp.191-202
• /
• 2006

Computer programs for a structure design help the optimum design that considers each condition. however, the findings can not explain accurately a behavior of the real-living structure because each condition of a structure is simplified and generalized. The smart structure is introduced to overcome these problems, and we can understand a behavior of the real-living structure by means of Health Monitoring System. In this study, we compare a behavior by means of the existing structure design with a behavior of the living structure by means of an experiment. As a result, we examine adequacy of a measuring system and developing possibility in the future.

• Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.34-41
• /
• 2021

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.109-110
• /
• 2023

Domestic ultra-hard road repair materials require a lot of time before the road can be opened to traffic. Therefore, in this study, Methyl Methacrylate (MMA) based road repair material was used to improve the above problems. Furthermore, the basic physical properties of MMA-based pavement repair materials are examined to confirm their suitability in concrete pavements. For this study, two types of MMA road repair materials (A type and B type) were selected. Then, the curing of the test specimens prepared for painting was carried out under three conditions. The experimental items were viscosity (drop time) and drying time (set to touch, dry-hard). As a result of the experiment, viscosity (drop time) was faster in type A than in type B. The drying time results were as follows. In the case of set ti touch, both type A and type B dried in about 10 minutes regardless of the curing conditions. In the case of dry-hard, regardless of the curing conditions, A type dried longer than B type, but it dried faster than conventional road repair materials. Therefore, within the scope of this study, it is considered that A type has a high potential for utilization as a road repair material.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.29-40
• /
• 2019

The concept of smart city is understood as an indispensable component of urban regeneration projects in small cities in terms of providing a better urban environment and efficient living systems with a limited budget. Recently, the Korean government revised the law that related to the construction of the smart city and started to implement the smart city concept not only to new-large urban development but also to small-existed regeneration projects. However, it is difficult for small and medium-sized cities that are suffering from the insufficient professional workforce; knowledge supports for high-tech and lack of professional networks to proceed smart city planning and project that containing regional characteristics. This paper aims to examine the effective way of urban regeneration for small and medium-sized cities through smart city planning and strategy. As an important case, this paper looks at the 'Smart City Challenge' competition that was hosted by the US Department of Transportation in 2015. It examines the background and operation process of the smart city challenge competition, and then analyses each city's strategy and characteristics of seven finalists. This paper highlights the several key lessons to Korean cities: 1) the importance of national government's support in financial and professional resources; 2) the cooperation with local governments and IT corporations which provides realistic and detailed technical solutions; 3) the holistic and integrated approach to urban regeneration starting from transportation issues; 4) the necessity of the government's clear visions and guidelines toward the smart city.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.546-549
• /
• 2022

In recent years, to prevent the increase in accidents at industrial sites, various innovative technologies from the 4th industrial era have been incorporated into the construction administration to promote the advancement of safety management. As a result, smart safety management systems using intelligent monitoring that prevent and manage risks in industrial sites in real time are attracting attention. Smart safety management systems provide users with real-time, remote monitoring of factors such as noise, gas concentration fine dust concentration, building material quality, building tilt, and RFID-based worker access through sensors located everywhere. This paper presents a method for collecting and monitoring various data for smart safety management systems via Zigbee communication using Raspberry Pi.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.3
• /
• pp.9-18
• /
• 2021

This paper conducted a survey of residents and public officials for the projects to make smart-city plans of Geumsan-gun. In introduction, several domestic and foreign cases related to smart-city projects were Investigated. To initiate the smart-city project of Geumsan-gun, the local status of Geumsan-gun was investigated regarding various aspects of natural, social, urban environment and smart-city facilities. The results of this survey are as follows: Overall, more than half of survey respondents said they had satisfaction of their housing quality. Several problems in their residence areas, such as insufficient welfare systems, shortage of parking spaces, industrial infrastructure, were reported. Meanwhile, the survey result indicated that tourism and leisure facilities, health care support systems, industries promote the economy and job market of the area. An interview with public official is also important to select the relevant meaningful projects and regional issues. Three models for each spatial unit were proposed in Geumsan-gun based on the natural, agricultural, and geographical environment. In result, the three smart-city models are categorized as urban type(large area), complex city type(medium area), and smart village type(small area)