• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.818-823
• /
• 2000

In practical design studies, most of designers solve multidisciplinary problems with complex design structure. These multidisciplinary problems have hundreds of analysis and thousands of variables. The sequence of process to solve these problems affects the speed of total design cycle. Thus it is very important for designer to reorder original design processes to minimize total cost and time. This is accomplished by decomposing large multidisciplinary problem into several multidisciplinary analysis subsystem (MDASS) and processing it in parallel. This paper proposes new strategy for parallel decomposition of multidisciplinary problem to raise design efficiency by using genetic algorithm and shows the relationship between decomposition and multidisciplinary design optimization (MDO) methodology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1725-1727
• /
• 2015

In this letter, a QR decomposition based sequential BP detection scheme is proposed for MIMO systems. The proposed scheme performs the sequential updates from the observation node having the smallest degree among all the observation nodes. Our simulation results verify that the proposed scheme achieves an improved error performance with a significantly accelerated detection convergence speed compared to the conventional schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.550-555
• /
• 2008

An efficient production method of spirulina extract was developed by enzymatic treatment using proteolytic enzymes. The suitable dosage of Tunicase, a cell lytic enzyme, was used to be 2.0% (w/w). To maximize solid recovery and spirulina extraction (SE) index, which indicates nucleic acid-related substances content, the dosage of Alcalase, commercially available pretense, was found to be 1.0% (w/w). By simultaneous treatments using optimal dosages of Tunicase and Alcalase, the highest SE index and solid recovery were obtained. The SE index and solid recovery of simultaneous treatments were notably enhanced by 100% ($11.4%\;{\rightarrow}\;22.8%$) and 56% ($45.2%\;{\rightarrow}\;70.7%$), respectively, than those of the non-treated extracts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.883-890
• /
• 2001

In practical design studies, most of designers solve multidisciplinary problems with large size and complex design system. These multidisciplinary problems have hundreds of analysis and thousands of variables. The sequence of process to solve these problems affects the speed of total design cycle. Thus it is very important for designer to reorder the original design processes to minimize total computational cost. This is accomplished by decomposing large multidisciplinary problem into several multidisciplinary analysis subsystem (MDASS) and processing it in parallel. This paper proposes new strategy for parallel decomposition of multidisciplinary problem to raise design efficiency by using genetic algorithm and shows the relationship between decomposition and multidisciplinary design optimization (MDO) methodology.

• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1480-1490
• /
• 2008

Design of a linear predictor and matching of an entropy coder is the art of lossless audio coding. In this paper, we use the covariance method and the Choleskey decomposition for calculating linear prediction coefficients instead of the autocorreation method and the Levinson-Durbin recursion. These results are compared to the polynomial predictor. Both of them, the predictor which has small prediction error is selected. For the entropy coding, we use the Golomb-Rice coder using the block-based parameter estimation method and the sequential adaptation method with LOCO-land RLGR. The proposed predictor and the block-based parameter estimation have $2.2879%{\sim}0.3413%$ improved compression ratios compared to FLAC lossless audio coder which use the autocorrelation method and the Levinson-Durbin recursion. The proposed predictor and the LOCO-I adaptation method could improved by $2.2879%{\sim}0.3413%$. But the proposed predictor and the RLGR adaptation method got better results with specific signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.1010-1015
• /
• 2009

In this paper, we propose a novel detection ordering technique for MIMO signal detection methods based on QR decomposition and successive interference cancellation (SIC). Recently, new signal detection methods for spatially multiplexed (SM) MIMO systems were proposed, where all the constellation points are tried as the first layer symbol, and the remaining layer symbols are estimated via SIC, producing candidate vectors. Finally, the ML metric values are calculated for the candidate vectors, that are again used to select the best symbol vector. It was also shown that the ordering method in the conventional V-BLAST is not suitable to these signal detection methods. In this paper, we propose a novel ordering method, and we show via computer simulations that the proposed ordering method improves the error performance.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.302-306
• /
• 2014

The present study was carried out to optimize fermentation parameters for the production of cellulolytic enzymes through solid substrate fermentation of Trichoderma reesei and Aspergillus niger grown on wheat straw. A sequential optimization based on one-factor-at-a-time method was applied to optimize fermentation parameters including temperature, pH, moisture content and particle size. The results of optimization indicated that $40^{\circ}C$, pH 7, moisture content 75% and particle size between 0.25~0.5 mm were found to be the optimum condition at 96 hr fermentation. Under the optimal condition, co-culture of T. reesei and A. niger produced cellulase activities of 10.3 IU, endoglucanase activity of 100.3 IU, ${\beta}$-glucosidase activity of 22.9 IU and xylanase activity of 2261.7 IU/g dry material were obtained. Cellulolytic enzyme production with optimization showed about 72.6, 48.8, 55.2 and 51.9% increase compared to those obtained from control experiment, respectively.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.75-79
• /
• 1993

본 논문에서는 변화가 심한 음원파형을 추정하는 새로운 순차처리 알고리듬을 제안한다. 먼저, 1) 기존의 순차처리 분석법중 대표적인 분석법인 RLS(recursive least square)의 문제점들을 검토하고, 2) 이를 개선하기 위해서 관측행렬(observation matrix)을 최적차수의 SVD(reduced-rank singular value decomposition)로 재구성하고, 3) 이에 견실개념(robustness concept)을 적용해서 최적의 성도변수(vocal tract parameter)를 찾아내고 역필터를 적용해서 음원(voice source)을 효과적으로 구분해낸다. 본 논문에서 제안된 방법으로 음원을 추정할 경우, 변화가 심한 음원파형을 잘 추정할 수 있으며, 음원의 특성을 구분해낸 성도 파라미터도 효과적으로 추정할 수 있다. 본 연구내용은 음성합성에서 자연성 개선 및 개인성 구현을 위해서 필수적이며, 다양한 형태의 음성을 표현하기 위해 사용되어질 수 있다. 또한, 음성코딩, 화자인식, 음성인식에서도 사용되어질 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1419-1424
• /
• 1999

In order to implement morphological filters on image processing systems, the size of structuring element must be small due to the architectural constraints of the systems, which requires the decomposition of structuring element into small elements for the filters with large structuring elements. In this paper, an algorithm for decomposition of structuring element with no restriction on the shape and size is developed which enables sub-optimal implementation of any morphological filter on 3X3 pipeline machine. The given structuring element is first decomposed into the union of elements using sequential search procedure, then each element is further decomposed optimally into 3X3 elements, resulting in final sub-optimal 3$\times$3 hybrid decomposition. The proposed algorithm is applied to some structuring elements and the results close to the optimum are obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.45-53
• /
• 1998

본 논문에서는 선스펙트럼 주파수(LSF) 파라미터를 위한 제한된 시간적 분해법을 제안한다. LSF 파라미터는 인접 차수에 대해 의존적이고, 차수간 순차성이 있으나, 기존의 시간적 분해법은 이러한 성질을 보존하지 못한다. 즉, 추정된 사건 벡터가 더 이상 LSF 파 라미터로서 해석되지 못하는 문제가 있다. 이를 해결하기 위하여, 본 논문에서는 사건 함수 간에 새로운 제약을 두어, 추정된 사건 벡터가 LSF 파라미터의 성질을 유지하도록 한다. 결 과적으로 제안된 방법을 이용하여 구해진 사건 벡터는 LSF 파라미터와 동일한 방법을 적용 하여 효과적으로 양자화될 수 있고, 실험 결과 평균 752bps의 전송률로 투명한 양자화를 수 행할 수 있었다.