• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.777-783
• /
• 2004

하천 세내지 주변은 급속한 시가지 조성과 인구밀집으로 유역의 불투수층이 증가하여 홍수도달시간이 짧아지고 홍수유출량이 증가하고 있다. 또한 엘리뇨${\cdot}$라니냐 등의 이상기후로 홍수사상의 발생 빈도와 규모가 증가하면서 홍수피해도 대형화되어 가고 있다. 그러나 치수사업은 다른 공공사업에 비해 경제성이 저평가 되어 투자우선순위가 밀려 사업시행이 지연되고 예방적 차원의 대책도 미흡하여 피해가 증가하는 악순환이 계속되고 있다. 따라서 본 인구에서는 우리나라의 치수경제성 분석에 있어 계량화하지 못하고 있는 자산이용고도화 효과를 치수안전도와 더불어 분석하고자 한다. 자산이용고도화는 치수사업 시행으로 해당지역의 치수안전도 향상에 따른 자산가치의 상승을 말하는데, 특정지역의 자산가치를 가장 객관적으로 표현할 수 있는 공시지가를 근거로 분석을 수행하였다. 치수사업 시행으로 인한 편익과 하천 특성에 따른 지가변동률의 차이가 통계적으로 유의성이 있는지를 분산분석을 통해 검증하였으면, 자산가치의 상승을 순수 연평균지가변동률로 나타내었다. 치수안전도는 홍수피해 잠재성과 홍수방어능력으로 구분하였는데 홍수피해 잠재성은 도시화율에 따라 구분하였고, 홍수방어능력은 홍수량의 빈도해석과 불확실성을 고려하여 조건부 비초과확률로 나타내었다. 본 연구에서는 소도시 지역(경안천, 복하천, 청미천)을 대상으로 200년 빈도의 홍수사상에 내해 10년, 50년 설계빈도로 건설된 제방의 조건부 비초과확률을 산정하여 지가변동률의 추이를 비교 분석하였다. 분석 결과, 소도시 지역에서는 조건부 비초과확률이 $10\%$ 상승했을 때 순수 연평균지가변동률이 5배정도 상승함을 알 수 있었다.다시 입력자료로 사용하는 업데이트 방식을 사용하기 때문에 예측결과의 오차가 완전하게 보정되지 않으면 다음 결과에 역시 오차를 주게 되어 오차보정이 상당히 중요하다는 것을 알 수 있었다. 오차를 보다 효과적으로 보정하기 위해서는 퍼지제어에 사용되는 퍼지규칙의 수를 늘리고, 유입량에 직접적인 영향을 주는 강우량과 연계한 2변수의 Fuzzy-Grey 모형을 이용한다면 보다 정확한 유입량 예측이 가능할 것으로 사료된다.이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유아기에 심근경색 및 허혈성 심근증 또는 선천성 승모

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.255-268
• /
• 2021

The aim of this study was to investigate the relationships between the stages of calcification of various teeth and skeletal maturity stages among Korean subjects. The samples were derived from hand-wrist, panoramic radiographs, and lateral cephalograms of 743 subjects (359 males and 384 females) with ages ranging from 6 to 14 years. Calcification of seven permanent mandibular teeth on the left side were rated according to the system of Demirjian. To evaluate the stage of skeletal maturation, hand-wrist radiographs were analyzed by skeletal maturity indicators (SMI) system of Fishman and lateral cephalograms by cervical vertebral maturation (CVM) method of Baccetti. Statistically significant relationships were found between dental calcification and skeletal maturity stages according to Spearman rank-order correlation coefficients (r = 0.40-0.84, p < 0.001). The second molar showed the highest correlation and central incisor showed the lowest correlation for female and male subjects. For both sexes, canine stage G and second molar stage F were related to SMI 6 and CS 3. Because of the high correlation coefficients, this study suggests that tooth calcification stages from panoramic radiographs might be clinically useful as a maturity indicator of the pubertal growth period in Korean patients.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.5
• /
• pp.303-314
• /
• 2018

In the past few years, government agencies and corporations have succumbed to stealthy, tailored cyberattacks designed to exploit vulnerabilities, disrupt operations and steal valuable information. Security Information and Event Management (SIEM) is useful tool for cyberattacks. SIEM solutions are available in the market but they are too expensive and difficult to use. Then we implemented basic SIEM functions to research and development for future security solutions. We focus on collection, aggregation and analysis of real-time logs from host. This tool allows parsing and search of log data for forensics. Beyond just log management it uses intrusion detection and prioritize of security events inform and support alerting to user. We select Elastic Stack to process and visualization of these security informations. Elastic Stack is a very useful tool for finding information from large data, identifying correlations and creating rich visualizations for monitoring. We suggested using vulnerability check results on our SIEM. We have attacked to the host and got real time user activity for monitoring, alerting and security auditing based this security information management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8691-8699
• /
• 2015

With the technology of our time growing sophisticated everyday, softwares advance rapidly in accordance. Reflecting this trend, researches on Usability of S/W GUI(Graphical User Interface) is actively taking place. However, despite the active researches on such topic, Usability study of S/W GUI for weapon system remains insufficient. For such reason, this paper intends to focus on drawing evaluation factors as well as priority of design factors for Usability of S/W GUI for weapon system. For an accurate and reliable result, Usability evaluation attributes & design factors were assessed by professionals. Moreover, by incorporating AHP(Analytical Hierarchy Process) and Matrix analysis, each evaluation attributes' level of importance and relation between design factors & usability attributes were assessed to draw final design priority. As a result, the importance of Informativity, Accessibility, and Visibility were derived as 0.127, 0.121, 0.108, and selected to be the foremost priority for evaluating. This research could be utilized as foundation for usability evaluation of S/W GUI on weapon system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.4
• /
• pp.1-11
• /
• 2009

This study was intended to set development priorities for five undeveloped neighborhood parks scattered throughout the downtown area of Cheongju City using a PDPI(Park Development Pressure Index). In order to calculate the PDPI, this study employed an additive integration method. The PDPI was graded from 1 to 5, based on the evaluation scores in accordance with nine indicators selected through literature reviews and interviews with public officials. The indicators have been classified into three categories: physical environment, utilization possibility, and facility distribution. The indicators are as follows: 1) 'altitude and inclination' and 'NDVI' as physical environment indicators; 2) 'ratio of residential area', 'forecasted utility population', 'undeveloped period', 'redevelopment near parks', 'ratio of area divided by main streets', reflecting utilization possibility; and 3) 'Distance between Neighborhood Parks' and 'Distribution of alternative facilities' as facility distribution. The following results were found: 1) three neighborhood parks including 'Sagic 2', 'Sachen', and 'Dangsan' were ranked in the first grade of PDPI; and, 2) one neighborhood park 'Samsungdang' was ranked in the fifth grade of PDPI. The above results mean that among undeveloped neighborhood parks, three have been exposed to extremely strong park development pressure, and that while two neighborhood parks have had strong exposure to park development pressure due to potential users according to their close location to Sagic Ro, an east-west main axis of Cheongju City, one neighborhood park has had weak exposure to development pressure because of the close location to 'Chuungbuk National University' and a lack of residential areas, showing a low possibility for development.

• Archives of design research
• /
• v.16 no.2
• /
• pp.395-404
• /
• 2003

As scenario-based design is expanded to various fields of design, it is introduced to HCI(Human Computer Interaction) in order to figure out user information & tasks. However, scenario based design methods that is focused on collecting scenarios regarding users'needs, is mainly utilized conceptual design stage for system itself. There is a gap between users'need scenarios to interface design of HCI system. In this study, web survey is suggested as scenario based interface design method in order to connect scenario collecting to task specification and to menu structure design of home-network controller. The degree of users'need for specified tasks was verified to various kinds of users through web survey and it decideddepth and order of menu structure. Tasks also was categorized to situation mode and users can make their own menu structure by selecting menu contents or even mode itself, because degrees of need for specified task situation were varied by lifestyle of user group. Finally, it is found that web survey method can be applied to collect and database various scenarios of. various users when a questionnaire is well designed for collection.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.243-248
• /
• 2015

Domestic road and railroad construction have been increasingly growing and for reasons of mitigating traffic congestion, urban plan and refurbishment project, deeper and longer tunnels have been built. The event of fire is the most fatal accident in a tunnel, and it can be very disastrous with a high possibility. In this study, QRA (Quantitative Risk Analysis) which is one of quantitative risk analysis approaches was applied to tunnel fire safety design and the evaluation of QRA cases and the cost comparison of QRA methods were carried out. In addition analysis of risk reduction effect of tunnel fire safety system was conducted using AHP (Analytic Hierarchy Process) and the priority of major factors that could mitigate the risk in tunnel fire was presented. As a result, significant cost reduction effect could be obtained by incorporating QRA and it is expected to design fire safety system rationally. The priority of fire safety system based on risk mitigation effect by fire safety system considering the cost is in order of water pipe, emergency lighting, evacuation passage and smoke control system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.192-201
• /
• 2018

This study intends to find efficient support methods for small and medium-sized businesses (SMBs) especially in the increasingly important mobile sector. We investigated regarding perceptions of mobile sector-specific support programs and their current state of usage, and perceptions of the new mobile market and the present conditions of each stage of production based on analysis of a survey that included 204 respondents in each SMB to achieve this goal. Concretely, detections through this research were the reasons for non-selection of support businesses, the future prospective mobile business area, the company's own first-preference item and the reason for the preference, plus new mobile areas of willingness to apply the company's own product and its own first-preference item, and the reason for the preference. In addition, we found out covering costs and revenue size of the maximum-revenue product for each stage (from the first to the fourth stage), the kind of a product's execution method connected to the product (e.g. self-production, outsourcing to another company to produce a product), and the execution method for pre-products. We can suggest a policy regarding efficient support alternatives for SMBs related to the mobile sector thanks to these findings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2021-2029
• /
• 2010

This paper suggested the method to design and analyze FMC robot's dispatching rule using the Simulation and Sequential Patterns. To do this, first of all, we built FMC using simulation and then, extracted signals that facilities call a robot, saved it as the log type. Secondly, we built robot's optimal path using the Sequential Pattern Mining with the results of analyzing the log and relationship between machine and robot actions. Lastly, we adapted it to the A corp.'s manufacturing line for verifying its performance. As a result of applying the new dispatching rule in FMC, total throughput and total flow time decrease because of decreasing material loss time and increasing robot utility. Furthermore, because this method can be applied for every manufacturing plant using simulation, it can contribute to advance total FMC efficiency as well.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.443-451
• /
• 1988

New crown ether dye-Ⅰ and dye-Ⅱ having an azo group(-N=N-) were synthesized from monobenzo-15-crown-5 and dibenzo-18-crown-6. These dyes showed ${\lambda}_{max}$ of 377 and 383nm respectively. The complexes of alkali metal ions ($Na^+$, $K^+$, $Cs^+$) with dye ligands showed band shift (390~400nm) and intensity increased. For a given anion, the extraction constants are in the order of $K^+$ < $Cs^+$ < $Na^+$ for dye-Ⅰ and $Cs^+$ < $Na^+$ < $K^+$ for dye-Ⅱ. These results show that the selectivity of crown ethers toward the alkali metal ions is dependant on the charge density of cation and the size of crown ether cavity. For a given cation, the order of the extraction constant is $Cl^-$ < $Br^-$ < $I^-$ < picrate. This order coincides with the degree of anion solvation effect.