• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.47-56
• /
• 2012

Bicycle has a large amount of kinetic energy available for energy harvesting technology in its speedy and balanced riding movement. Systematic and realistic analysis of its dynamic property is essential to improve the efficiency of energy harvester. However, there has not been enough researches about precise measurement or analysis of bicycle dynamics on real roads. This study aims to investigate the characteristics of vibrational movement of bicycle using MEMS-based accelerometer and to develop a prototype of electromagnetic energy harvester with nonlinear behavior which is proper to the random vibrations accompanied in bicycle riding. The vibrational components have average magnitude of 1 g and turn out to be independent of riding speed. The developed prototype of energy harvester was installed on a front port of a bicycle to use this ambient vibration and generated an average electrical power of 1.5 mW which is enough to support power for most of portable sensors and short range radio-frequency communication. Further study about isolation of vibration from a rider and conversion efficiency is ongoing. The developed energy harvester is expected to be a platform technology for sustainable portable power supply for various smart IT devices and applications.

• Korean Journal of Agricultural Science
• /
• v.31 no.2
• /
• pp.115-122
• /
• 2004

Physical and mechanical properties of fruits of jujube (Zizyphus jujuba Miller), leaves, secondary branches, and leafy stems were measured and analyzed. The physical dimensions of the fruits were measured and the detachment force of the fruit and leafy stems was measured. The detachment force of the jujube fruits increased and the force-to-weight ratio of the jujube fruits decreased as the weight of the jujube fruit increased. The weight of the leafy stems, number of leaves attached to the leafy stems, length of the leafy stems, diameter of the stem side of the leafy stems, diameter of the leafy stem end was average of 0.7g, 6.6ea, 12.2cm, 4.5mm, and 2.7mm, respectively. The major and minor axis of the jujube leaves, area of leaves, weight of the leaves, and detachment force of the leaves was average of 5.7cm, 3.3cm, $12.98cm^2$, 0.20g, and 4.39N, respectively. The terminal velocity of the jujube fruits increased as the weight of the fruits increased. The terminal velocity of the leafy stems, however, did not show a relationship with the weight of the leafy stems and the number of leaves attached to the leafy stem. The terminal velocity, however, slightly increased as the length of the leafy stems increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.86-93
• /
• 1981

For daily supply of rotifers to feed juvenile fish and/or larval crustaceans such as shrimp in their seedling culture procedures, the maximum daily increase of cultured rotifers in relations with the inoculation densities of rotifers and the concentrations of food organism, Chlorella sp. were initially investigated in an experimental culture unit. The best results were obtained from the 10 inds./ml of the rotifer inoculation density with $3\times10^6\;cells/ml$ of Chlorella showing the maximum daily increase of 73.0 inds./ml/day on the 7th day. Based on the best results of the initial experiments a trial was made for continuous daily harvests of rotifers. As in the initial experiments, the maximum daily increase of rotifer was observed on the 7th day, when the daily harvest was initiated and continued once a day for 6days. For the 6 days, the amount of the mean daily harvest was $1.42\times10^5$ individuals per culture flask ($3{\iota}\;filled\;with\;2{\iota}$culture water) shelving a possibility of continuous daily harvests.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2008

Quality attributes of welsh onion (Allium fistulosum L.) as affected by harvest timing (November, December 2006 and January 2007) and storage temperature (5, 10 and $20^{\circ}C$) were investigated in terms of respiration rate, weight loss, decay rate, color, hardness, sensory quality. A higher respiration rate was found when welsh onions were harvested later and storage temperature was higher. A smaller weight loss was observed in welsh onions that were harvested in November and stored at temperature of $5^{\circ}C$, demonstrating a 9.35% reduction. In other words, there were a minimum difference of 2.15% and a maximum difference of 9.92% between the weight loss in test samples harvested in November and those of test samples harvested in other months. The decay rate was higher in welsh onions harvested in January. The degree of color was more stable in test samples kept at temperature of $5^{\circ}C$ than those kept at higher temperature (10 and $20^{\circ}C$). There were, however, no significant differences in color changes among test samples harvested at different times of the year. Thus color change is closely associated with temperature. Also, welsh onions were harvested in November and stored at temperature of $5^{\circ}C$ showed a good sensory quality.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.119-119
• /
• 2017

부레옥잠은 대량 재배 및 수확이 가능한 수질정화용 식물로 생활하수, 축산폐수, 공장폐수 등의 수질정화 기능이 뛰어나고, 수확물은 건조 및 발효과정을 거쳐 가축 사료, 유기질 비료, 버섯 배지로 사용이 가능하고, 별도의 공업적 처리를 거치면 고부가가치의 바이오 연료, 연소용 연료로 사용이 가능한 친환경 농업 생산물로 본 연구에서는 부레옥잠의 고형연료 제조를 위한 수면에서 수확장치 개발을 위한 견인 특성을 파악하고 장치개발 가능성을 파악하고자 하였다. 부력구조물 부력, 부레옥잠 견인력, 부력을 측정하기 위한 실험 장치를 제작하여 부레옥잠 중량, 견인방식, 견인속도에 따른 견인력을 측정하였고, 경남 거제시에 위치한 저수지에서 실제 견인실험을 수행하였다. 실험결과 견인중량 및 견인 속도가 증가할수록 견인력은 증가하였으며 인력으로 부레옥잠을 견인하는 경우 부레옥잠 중량당 견인력은 약 $0.9{\sim}1.39kg_f$로 나타났으며 이는 향 후 부레옥잠 견인장치를 설계할 경우 부레옥잠 견인중량에 따른 견인력 산정 시 참고 자료로 매우 유용하게 활용 가능할 것으로 판단되었다. 저수지에서 견인실험 결과 견인속도 증가에 따른 유속저항으로 경운기에 의한 견인작업은 불가능하였으며 인력에 위한 견인 실험결과 부레옥잠 단위중량당 견인력은 견인바 3 m의 경우 1.5 ~ 2.6 N/kg, 견인바 6 m의 경우 2.1 ~ 5.4 N/kg로 비교적 크기로 나타났으나, 견인용 바에 따른 요인을 고려한 경우는 0.36 ~ 0.91 N/(kg-m)로 비교적 일정한 값을 보였다. 견인용 바 6 m, 무부하에서 인력과 경운기로 견인하는 경우 견인력은 39.24 N, 153.03 N으로 인력으로 견인하는 경우가 견인력이 작게 측정되었음. 이는 속도증가에 따라 물의 저항력이 증가함으로 나타난 결과로 부레옥잠 견인 시 견인속도는 0.36 m/s가 가장 적합한 것으로 판단되었다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.11a
• /
• pp.293-297
• /
• 2002

폐쇄형 식물 생산 시스템에서 생산되는 식물은 생장속도가 빠르기 때문에 생장속도를 제어하거나 예측할 수 없어 수확적기를 놓치면 품질이 현저히 떨어져 상품성이 저하된다. 이를 해결하기 위해서는 식물생장기간 동안 식물에 따라 적절한 생장환경을 조성하여 생장정도를 균일하게 할 수 있는 최적 환경제어가 필요하다. 본 연구에서는 폐쇄형 식물 생산시스템의 최적 환경제어를 위하여 엽록소형광분석법을 이용하여 상추를 중심으로 광합성효율 모델(photosynthesis efficiency model ; PEM)을 개발하였다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.23-28
• /
• 2002

본 연구에서는 간단한 조작을 통하여 작물의 특성에 따라 진동방향을 조절 가능하게 함으로써 물리적 성질이 서로 다른 감자, 고구마, 마늘, 양파, 생강 등 거의 모든 뿌리작물의 수확에 이용할 수 있는 다목적 굴취기를 기구학적으로 설계하고, 뿌리작물 굴취기의 성능에 영향을 미치는 진폭, 진동수, 작업속도를 변화시킬 때 각각의 조합에 있어서 굴취판상의 특정한 점들의 운동궤적을 분석하고 이에 기초하여 굴취기의 설계변수와 작업에서의 설정변수 를 결정하고자 하였으며, 그 결과를 요약하면 다음과 같다. 1) 작업위치에 따라 굴취판 뒷부분(선별부)의 진동방향 조절이 가능하기 때문에 진동방향을 조절하면 물리적 성질이 서로 다른 감자, 고구마 마늘, 양파 등 거의 모든 뿌리작물의 수확에 이용할 수 있을 것으로 사료된다. 2) 굴취판의 궤적분석결과 진폭이 3mm일 때에는 캠 축의 회전속도와 작업속도에 관계없이 굴취작업이 불가능할 것으로 판단되었다. 진폭이 6mm일 때에는 작업속도 1.08km/hr에서 캠 축의 회전속도가 841rpm 이상이면 굴취작업이 가능할 것으로 판단되었고, 작업속도 2.16km/hr이상에는 굴취작업이 불가능할 것으로 판단되었다. 진폭이 9mm일 때에는 작업속도 1.08km/hr에서 작업할 때 사용한 캠축의 회전속도에 관계없이 굴취작업이 모두 잘 이루질 것으로 판단되었고, 작업속도 2.16km/hr에서는 캠축의 회전속도가 995rpm 일 경우에만 굴취작업이 가능할 것으로 판단되었으며, 작업속도 3.24km/hr에서는 작업위치나 캠축의 회전속도에 관계없이 모두 굴취작업이 불가능한 것으로 사료된다. 3) 작업속도를 1.08km/hr 이상으로 하려면 소요동력의 관점에서 볼 때 진폭은 크게하고 진동수는 작게 하는 것이 유리하기 때문에 진폭을 9mm이상 취하는 것이 바람직할 것으로 사료된다.회로 가장 많이 발생하였으며, 다음으로 밀양과 나주지역이 29회, 김제지역이 28회 등으로 많은 발생빈도를 보였다.생시 진화방법의 개발 등에 대한 기본data로서의 역할을 충분히 할 수 있을 것으로 사료된다. 평가되었다.us에 대하여 높은 것으로 나타났다.bangular에서 subrounded에 해당한다. 이러한 현저한 차이를 보이는 이유는 남극적 빙하성 환경 조건과 이 지역의 해양 퇴적학적 특성에 그 원인이 있다고 해석된다.ea. Our ancestors really began to drink teas from the period of Unified Sila on. This country turning to the Koryo dynasty, tea drinking manner began to prevail so much that drinking tea became a ceremony. Daring the Yi dynasty it was much camplicated to make and boil the leaf tea. As a result of the previous fact pure tea came to have disappeared and odorous pharmaceutical became prevailent. 7) For value of exploiting Kungjuk tea (ginger tea seasoned with phyllostachy and addition of honeyl) was the highest among many. The worth of developing all the teas among all the beverages was regarded as that high of 51%, while even the tea regarded as worthless obtai

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.701-707
• /
• 2016

The charantin contents of leaves, stems, female and male flowers, and fruits in bitter gourd (Momordica charantia) were analyzed at different harvest seasons to investigate the availability of potential edible parts other than fruits. The charantin contents of fruits ranged from 14.7 to $16.0mg{\cdot}g^{-1}$ dry weight (DW) and those of leaves ranged from 131.4 to $138.0mg{\cdot}g^{-1}DW$, which was eight times higher than in fruits. The charantin contents of female and male flowers and stems were also significantly higher than those of the fruits. The ratio of total charantin content was highest in leaves (48%) of DW, followed by female flowers (20-21%), male flowers (14%), stems (12-13%), and fruits (5%). The charantin contents of fruits harvested 14 days after fruit setting was higher in June to mid-July (20.2 to $23.3mg{\cdot}g^{-1}DW$) than in late July to late August (13.3 to $19.4mg{\cdot}g^{-1}DW$). The higher the fruit weight, the lower the charantin contents, which showed that a negative correlation exists between fruit weight and charantin contents in bitter gourd. These results suggest that to obtain bitter gourd fruits with high charantin contents, fruits should be harvested until mid-July when fruit growth is fast and temperature is high. In addition, leaves, stems, and female and male flowers of bitter gourd can be used as for food, which are known to reduce blood sugar level.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.7-7
• /
• 2017

본 연구는 수확 작업에 따른 농업용 트랙터의 차축 부하 분석을 목적으로 수행되었다. 트랙터의 부하 측정을 위한 부하 계측 시스템은 4개 차축의 토크 측정을 위한 휠 토크미터, 부하 데이터 수집을 위한 데이터 수집장치, 토크미터에 전원을 공급하기 위한 전원공급장치, 트랙터 배터리를 이용하여 노트북 및 전원공급장치에 전원을 공급하기 위한 인버터, 데이터 처리를 위한 노트북으로 구성하였다. 본 연구에서는 부하계측을 수행하기 위해 동양물산(주)의 60 마력급 트랙터 T623을 사용하였다. 부하 분석은 수확 작업에 따른 주행 단수 별 데이터를 이용하여 통계분석을 수행하였다. 수확 작업 시 L2단에서 좌측 전륜에서의 최대, 최소, 평균, 표준편차 토크는 각각 1735.44, 818.36, 1201.38, 175.53 Nm로 나타났으며, 우측 후륜에서는 3685.11, 1971.68, 2981.80, 258.36 Nm로 나타났다. L3단에서 좌측 전륜에서의 최대, 최소, 평균, 표준편차 토크는 각각 1580.94, 701.06, 1007.93, 125.11 Nm로 나타났으며, 우측 후륜에서는 3239.57, 1735.44, 2472.11, 307.85 Nm로 나타났다. 트랙터의 차축 부하는 L2단에서 L3단으로 작업속도가 증가함에 따라 좌측 전륜에서 약 0.83배, 우측 후륜에서 약 0.82배 감소하는 것으로 나타났다. 향후에는 Romax_Designer (Version 17, Romax Technology, UK)을 사용하여 작업 부하에 따른 트랙터 트랜스미션 해석을 하여 트랙터 PTO 최적설계 가능성을 제시할 계획이다. 정격 출력 조건에서 시뮬레이션을 진행하여 트랙터 트랜스미션을 설계하면 안전성을 확보할 수 있지만 최적설계를 위해서는 실제 포장시험 데이터를 이용한 시뮬레이션이 필요하다고 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.402-407
• /
• 2014

In this study, Italy poplar(Populus euramericana) was selected for test specimen to measure cutting power when it harvested. The experiment has been controlled as three levels of feed rate (0.41, 1.25 and 2.5 m/s), sawing speed (800, 1,000 and 1,200 rpm), and the five levels of root collar diameter (50, 70, 90 and 110, 130 mm). The harvested volume after 3 years (root collar diameter 50 mm) was 10.5 tons, which falls short of the target amount of biomass is 20~30 ton/ha. In addition, the biomass amount of diameter 90 and 110 mm which reached the target amount were estimated to be 23.5 and 32.5 ton/ha respectively. As a result of experiment, it was found out that power of 128.2 and 175.8 W are consumed in case of cutting with the feed rate of 0.41m/s and minimum sawing speed (800 rpm) respectively. With the working area of 0.3 ha/h, it is considered to present working capacities of 16.5 and 22.8 ton/h respectively. The power consumed at the feed rate of 1.25 m/s is estimated to be 113.8 and 153.7W respectively and working capacity in a working area of 1 ha/h is estimated to be 23.5 and 32.5 ton/h. The power consumed at the feed rate of 2.5 m/s is estimated to be 119.8 and 166.9 W respectively and working capacity in a working area of 2 ha/h is estimated to be 47.0 and 65.5 ton/ha respectively. Therefore, the power source of harvest machine at the feed rate of 1.25, 2.50 m/s and sawing speed of 800 rpm shall be selected as it can process the target amount of estimated biomass.