• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.3
• /
• pp.137-148
• /
• 2012

Cloud service users request dedicated virtual computing resource from the cloud service provider to process jobs in independent environment from other users. To optimize this process with automated method, in this paper we proposed a framework for workflow scheduling in the cloud environment, in which the core component is the middleware called broker mediating the interaction between users and cloud service providers. To process jobs in on-demand and virtualized resources from cloud service providers, many papers propose scheduling algorithms that allocate jobs to virtual machines which are dedicated to one machine one job. With this method, the isolation of being processed jobs is guaranteed, but we can't use each resource to its fullest computing capacity with high efficiency in resource utilization. This paper therefore proposed a cost-efficient job scheduling algorithm which maximizes the utilization of managed resources with increasing the degree of multiprogramming to reduce the number of needed virtual machines; consequently we can save the cost for processing requests. We also consider the performance degradation in proposed scheme with thrashing and context switching. By evaluating the experimental results, we have shown that the proposed scheme has better cost-performance feature compared to an existing scheme.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.326-334
• /
• 2016

Omija (Schizandra chinensis) extract (OE) was fermented by using Lactobacillus plantarum EJ2014 to produce a beverage fortified with gamma-aminobutyric acid (GABA). After 2 days of fermentation in the presence of 2% monosodium glutamate (MSG) and 0.5% yeast extract (YE), the four-fold-diluted OE showed a higher viable cell count ($2.2{\times}10^9CFU/mL$) and lower acidity (1.2%) than that of the unfermented OE. In particular, addition of MSG as a precursor resulted in a small increase in the initial pH. MSG (2%) was completely converted to GABA (0.92%) during lactic acid bacteria fermentation for 3 days. Furthermore, the acidity of the fermented OE decreased from 1.74% to 0.56%. In addition, the original red color of the OE disappeared during LAB fermentation. However, when the fermented OE was mixed with 50% of the original OE, the original red color was recovered, with 19.56 and 13.92 for Hunter L and a values, respectively. The mixture of 50% original OE and 50% fermented OE showed the highest sensory score including the highest overall preference. In conclusion, the OE fortified with GABA and probiotics was produced by fermentation with a static culture, L. plantarum EJ2014.

• Clean Technology
• /
• v.17 no.2
• /
• pp.156-165
• /
• 2011

The process for bioethanol production from lignocellulosic biomass was studied through process simulation using PRO/II. Process integration was conducted with concentrated acid pretreatment, hydrolysis process, SMB (simulated moving bed chromatography) process and pervaporation process. Energy consumption could be minimized by the heat recovery process. In addition, material and energy balance were calculated based on the results from the simulation and literature data. A net production yield of 4.07 kg-biomass and energy consumption value of 3,572 kcal per 1 kg ethanol were calculated, which is indicating that 26% yield increase and 30% energy saving compared to the bioethanol production process with dilute-acid hydrolysis (SRI report). In order to make it possible, sugar conversion yield of cellulose and hemi-cellulose is to be reached up to 90% and fermentation of xylose needs to be developed. In order to reduce the energy consumption up to 30%, the concentration of acid solution after being separated by 5MB should exceed 20%. If acid/sugar separation by SMB process is to be practical, the bioethanol process designed in this study can be commercially feasible.

• Clean Technology
• /
• v.23 no.1
• /
• pp.104-112
• /
• 2017

Hydrogen production via steam reforming of liquefaction liquid from marine algae over hydrothermal liquefaction was carried out at 873 ~ 1073 K with a commercial catalyst and Ni based $K_2Ti_xO_y$ added catalysts. Liquefaction liquid obtained by hydrothermal liquefaction (503 K, 2 h) was used as a reactant and comparison studies for catalytic activity over different catalysts (FCR-4-02, $Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$ and Ni/$K_2Ti_xO_y$-MgO), reaction temperature were performed. Experimental results showed Ni/$K_2Ti_xO_y$ based catalysts ($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, Ni/$K_2Ti_xO_y-ZrO_2$/ $CeO_2$ and Ni/$K_2Ti_xO_y$-MgO) have a higher activity than commercial catalyst (FCR-4-02) and In particular, a product composition was different depending on support materials. An acidic support ($Al_2O_3$) and a basic support (MgO) led to a higher selectivity for CO while a neutral support ($SiO_2$) and a reducing support ($ZrO_2/CeO_2$) resulted in a higher $CO_2$ selectivity due to water gas shift reaction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1363-1368
• /
• 2008

The extraction and quantitative analysis conditions for astaxanthin from Haematococcus pluvialis, and the structural characteristics of H. pluvialis extract, H. pluvialis hydrolysate and synthetic astaxanthin were investigated using UV/visible and FT-IR spectrometers. Astaxanthin was dissolved in methanol, and then treated to enhance the solubility by sonication for 45 min. With sonication pretreatment, the solubility of astaxanthin increased up to 1.5 times compared to that without sonication. The extracts were hydrolyzed by cholesterol esterase for the analysis of H. pluvialis extract containing astaxanthin ester. A HPLC method using reverse phase C18 column with methanol-water (95:5, v/v) as mobile phase was developed to analyze astaxanthin. After hydrolysis, the absorption spectrum of H. pluvialis hydrolysat was changed to similar pattern to synthetic astaxanthin, confirming the extraction and analysis condition of astaxanthin from H. pluvialis.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.92-104
• /
• 2014

CM services have been increasingly practiced over the two decades in the Korean construction industry, and recent efforts focus on further development in advanced CM capabilities and expansion to overseas market. However, there has been lack of holistic research to investigate current status and future direction of CM industry in Korea. In this context, the purposes of this study are 1) to analyze current status of Korean CM industry in terms of owners, market, CM firms, contracts, and work scopes, 2) to define different types of CM practices, and 3) to propose growth models for Korean CM firms based on the defined CM project types. An extensive literature review and statistical analysis of 2012 CM contracts were performed in order to analyze the CM status. Based on the analyses, ten different CM types are defined, and growth paths of CM firms are illustrated. Implications and lessons learned during the statistical analysis and workshops are briefly introduced as well.

• Clean Technology
• /
• v.23 no.4
• /
• pp.429-434
• /
• 2017

To investigate the effect of magnesium oxide addition, $Cu/ZnO/MgO/Al_2O_3$ (CZMA) catalysts were prepared using co-precipitation method with fixed molar ratio of Cu/Zn/Mg/Al as 45/45/5/5 mol% for low-temperature water gas shift reaction. Synthesized catalysts were characterized by using BET, $N_2O$ chemisorption, XRD, $H_2-TPR$ and $NH_3-TPD$ analysis. The catalytic activity tests were carried out at a GHSV of $28,000h^{-1}$ and a temperature range of $200{\sim}320^{\circ}C$. At the same condition, magnesium oxide added catalyst (CZMA 400) showed that the lowest reduction temperature and stable presence of $Cu^+$, that is active species and abundant weak acid site. Also magnesium oxide added catalysts (CZMA) showed higher catalytic activity at temperature range above $240^{\circ}C$ than the catalyst without magnesium oxide (CZA). Consequently, CZMA 400 catalyst is considered to be excellent catalyst showing CO conversion of 77.59% without deactivation for about 75 hours at $240^{\circ}C$, GHSV $28,000h^{-1}$.

• Korean Journal of Environment and Ecology
• /
• v.18 no.4
• /
• pp.446-455
• /
• 2004

This study has been conducted as a basic research for developing efficient ways of managing Korean National Parks by finding differences via the comparison of present management systems of national parks in Korea and Japan. The survey was conducted through telephone interviews and direct interviews with staffs of related organizations as well as related literature study. In result, it is found that Japanese national parks have a numerical standard of minimum area, with less staff than Korea, and larger designated areas are being managed. Management organizations of both countries are divided as main and commission. In Korea, 6 staff in Natural Resources Division under Ministry of Environment are managing main organization, and in Japan, 53 staff of 3 divisions(National Park Division, Natural Environment Management Division, General Affairs Division) are taking charge of it. Moreover, General Affairs Division, dividing whole country into 11 blocks, manages 11 units of natural preservation offices, 12 branch offices, and 67 units of nature preservation management offices. In case of commission, Foundation of Natural Park Beautification & Management in Japan has a headquarter and 20 branch offices with 54 staff who are only doing site management, while in Korea, the National Parks Management Corporation has a headquarter and 25 offices with 748 staff carrying out main office jobs and site management side by side. From the differences in both countries, we could suggest efficient measures for our national park management as follows: \circled1 introduction of numerical value as criteria for national park designation, \circled2 review of use zone, \circled3 division of the national park management office into site office and regional office, with dividing works and re-posting staff, \circled4 enlargement of park management division in Department of Environment, \circled5 National Park authority becomes a national public servant

• The Korean Society of Law and Medicine
• /
• v.19 no.1
• /
• pp.207-254
• /
• 2018

The major court rulings delivered in 2017 include the ruling that separated the legal character of denture production agreement signed together with medical care agreement and found a subcontracting dimension in the former, and the ruling that overcame the limitations of the theory of entire appearance of a fetus as discussed in civil law by using the legal principle of insurance which suggests that unborn child insurance takes effect after the contract is signed and the first installment of the premium is paid in. As more court rulings find the medical specialists responsible for accidents and injuries from drugs, some argue that medication counseling by the druggist who makes and dispenses drugs should be upgraded. And with respect to a court ruling that denied the hospital's responsibility for an infection-involving accident even if there were no records on specific measures taken in infection management, some criticized the court for being too conservative in recognizing responsibilities. And with respect to infectious disease management, some criticized the court for its interpretation and application of the facts in the direction of denying the negligence. In addition, some claimed that it is necessary to establish institutional system for hospital infection control and its aid for victims, and to improve the system including the reversal of the burden of proof given the special nature of hospital infections. A number of rulings on the duty to disclose included the one which stated that the specific matter did not require a doctor's explanation as it was explained or the specific medical service would have been performed even if no explanation had been given. There was a greatly controversial ruling over the scope of indemnification, which accepted the occurrence of multiple scars and deformation as disorders while regarding breast as a thoracic organ. And a Supreme Court ruling over interpreting Medical Service Act was criticized as overstepping the boundary allowed in the law.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.46-51
• /
• 2013

In this paper, the optimum placement and shape of UHF antenna on the unmanned aerial vehicle (UAV) are analyzed by using the electromagnetic (EM) simulation on the various locations. The FEKO was used for the EM-simulation. In order to reduce the complexity of simulation and minimize the runtime and memory usage, the composite aircraft structure is simplified as the PEC model excluding the radome structure. The simulation was performed on the wing and ventral fin of UAV, and the antenna shape used the monopole, dipole, and bent monopole antennas. When the monopole antenna is mounted under the wing, two antennas need to be mounted under the right and left wings, and those antennas have to be switched as the direction of UAV wing to the line of sight (LOS) data-link (DL) ground antenna. In the case of mounting under the ventral fin, one antenna can be used regardless of the direction of UAV wing to the LOS DL ground antenna. Also, the antenna gain is improved by the blockage reduction. The antenna gain is further improved by using the bent monopole antenna. The optimum solution of UHF antenna placement and shape on UAV is to mount the bent monopole antenna under the ventral fin.