• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.13-21
• /
• 2019

There are many cuts or natural rock slopes that remain stable for a long time in the natural environment with steep slopes ($65^{\circ}$ to $85^{\circ}$). In terms of design practice, the rock mass consisting of similar rock condition and geological structures is defined as a good continuum rock slope, and during the process of decision making angle of this rock slope, it will be important to establish the geotechnical properties estimating method of the continuum rock on the process of stability analysis in the early stages of design and construction. In this study, the stability analysis of a good continuum rock slope that can be designed as a steep slope proposed a practical method of estimating the shear strength by induced from the Hoek-Brown failure criterion, and in addition, the design applicability was evaluated through the stability analysis of steep rock slope. The existing method of estimating the shear strength was inadequate for practical use in the design, as the equivalent M-C shear strength corresponding to the H-B envelope changes sensitively, even with small variations in confining stress. To compensate for this problem, it was proposed to estimate equivalent M-C shear strength by iso-angle division method. To verify the design applicability of the iso-angle division method, the results of the safety factor and the displacement according to the change in angle of the cut slope constructed at the existing working design site were reviewed. The safety factor is FS=16~59 on the 1:0.5 slope, FS=12~52 on the 1:0.3 slope, most of which show a 10~12 percent reduction. Displacement is 0.126 to 0.975 mm on the 1:0.5 slope, 0.152 to 1.158 mm on the 1:0.3 slope, and represents an increase of 10 to 15%. This is a slightly change in normal proportion and is in good condition in terms of stability. In terms practical the working design, it was confirmed that applying the shear strength estimated by Iso-angle division method derived from the H-B failure criterion as a universal shear strength for a good continuum rock mass slope was also able to produce stable and economic results. The procedure for stability analysis using LEM (Limit Equilibrium Analysis Method) and FEM (Finite Element Analysis Method) will also be practical in the rock slope where is not distributed fault. The study was conducted by selecting the slope of study area as a good rock condition, establishing a verification for which it can be applied universal to a various rock conditions will be a research subject later on.

• 대한공업교육학회지
• /
• v.44 no.1
• /
• pp.1-22
• /
• 2019

The purpose of this study is to examine the mediating effects of resilience in the relationship between parent support and career decision level of specialization technical high school students and to find out ways to improve the level of desirable career guidance and counseling. The research questions are as follows: First, what is the level of parent support, career decision level, and resilience of special technical high school students? Second, what is the relationship between parent support, career decision level and resilience of high school students? Third, the resilience of resilience plays a mediating role in the relationship between parent support and career decision level of special technical high school students. In order to achieve the purpose of the study, the theoretical background related to parent support, career decision level, and resilience of special technical high school students was investigated and the test tool was produced. The results of the study are as follows. Parental support, career decision level, and resilience were highly correlated. There was a significant correlation between parent support and career decision level, resilience and career decision level, and emotional support and verbal encouragement were more than 50% of the career decision level. In terms of mediating effect, the effect of parent support on career decision level was found to be partially mediated by overall resilience and sub - factors such as control, positive, and sociality. Therefore, in order to improve the quality of career guidance counseling, a program linked to the school and the home should be conducted considering both domestic factors and internal factors.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1003-1012
• /
• 2018

This study is for checking the possibility of Lentinula edodes as cosmetic materials. For this we carried out biological active evaluation about anti-oxidant and anti-inflammatory effects by Lentinula edodes extracts. We extracted Lentinula edodes with water and 70% ethanol and then in order to evaluate anti-oxidant activity we treated samples by concentrations (100, 500, 1000) ${\mu}g/ml$ and carried out 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging, the activity of 2,2'-azino-bis ( 3-ethylbenzothiazoline-6-sulphonic acid )-diammonium salt (ABTS) cation radical scavenging and superoxide dismutase(SOD) like activity. Also, in order to evaluate effect of anti-inflammatory the samples in macrophages(RAW 264.7 cells), we carried out evaluation of cell viability, nitric oxide inhibitory activity western blot. The results of DPPH, $ABTS^+$ radical scavenging activity and SOD-like activity of the Lentinula edodes extracts increased in dose-dependent manner. The cytotoxic of samples by MTT assay showed no toxicity at the concentrations of 10, 25 and $50{\mu}g/ml$ of Lentinula edodes extract. Nitric oxide inhibition activity results showed that the extracts reduced NO productions in a concentration-dependent manner. Expression of inflammatory cytokines as $TNF-{\alpha}$, $PGE_2$ and $IL-1{\beta}$ decreased in a concentration-dependent manner and iNOS and COX-2 proteins expression rates were decreased significantly in western blot analysis. From the results of the experiment, it was comfirmed that the Lentinula edodes extracts had excellent anti-oxidant and anti-inflammatory effect and could be used as a safe natural cosmetic material in the future.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.382-391
• /
• 2019

This study was conducted to verify whether smartphone hiking apps, which generate social network data including location information, are useful tools for analyzing the use characteristics of a forest recreation area. For this purpose, the study identified the functions and service characteristics of smartphone hiking apps. Also, the use characteristics of the area of Daegwallyoung were analyzed, compared with the results of the field survey, and the applicability of hiking apps was reviewed. As a result, the service types of hiking apps were analyzed in terms of three categories: "information offering," "hiking record," and "information sharing." This study focused on an app that is one of the "hiking record" types with the greatest number of users. Analysis of the data from hiking apps and a field survey in the Daegwallyoung area showed that both hiking apps and the field survey can be used to identify the movement patterns, but hiking apps based on a global positioning system (GPS) are more efficient and objective tools for understanding the use patterns in a forest recreation area, as well as for extracting user-generated photos. Second, although it is advantageous to analyze the patterns objectively through the walking-speed data generated, field surveys and observation are needed as complements for understanding the types of activities in each space. The hiking apps are based on cellphone use and are specific to "hiking" use, so user bias can limit the usefulness of the data. It is significant that this research shows the applicability of hiking apps for analyzing the use patterns of forest recreation areas through the location-based social network data of app users who record their hiking information voluntarily.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.57-70
• /
• 2021

As COVID-19 spreads, people's interest in smart learning that can do non-face-to-face learning is increasing nowadays. In this study, we aim to empirically analyze how users' thoughts on COVID-19 and the information quality and system quality of smart learning systems affect users' acceptance of smart learning and examine the effect of perceived sensitivity and severity of COVID-19 on the satisfaction and use of smart learning through concerns about the risk of transmission. In addition, we examined the influence of information quality composed of content quality and interaction quality and system quality composed of system accessibility and functionality on the use of smart learning through user satisfaction. To verify the validity of the proposed model, we conducted a survey on 334 users with experience in using smart learning, and performed the analysis using Smart PLS 3.0. According to the analysis results, among information quality and system quality, only functionality has a positive (+) effect on the satisfaction of smart learning, and satisfaction has a positive (+) effect on the usage behavior. However, it is found that accessibility among system quality do not affect satisfaction, and concern about the risk of transmission has a negative effect on satisfaction. This study can provide meaningful guidelines to researchers when researching smart learning to support students' learning in a pandemic situation of a new infectious disease, such as COVID-19. It will also be able to provide useful implications for educational institutions and companies related to smart learning.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.127-135
• /
• 2021

To respond to the threat of global warming, countries around the world are promoting the spread of renewable energy and reduction of carbon emissions. In accordance with the United Nation's Sustainable Development Goal to combat climate change and its impacts, global automakers are pushing for a full transition to electric vehicles within the next 10 years. Electric vehicles can be a useful means for reducing carbon emissions, but in order to reduce carbon generated in the stage of producing electricity for charging, a power generation system using eco-friendly renewable energy is required. In this study, we propose a smart electric mobility operating system integrated with off-grid solar power plants established in Tanzania, Africa. By applying smart monitoring and communication functions based on Arduino-based computing devices, information such as remaining battery capacity, battery status, location, speed, altitude, and road conditions of an electric vehicle or electric motorcycle is monitored. In addition, we present a scenario that communicates with the surrounding independent solar power plant infrastructure to predict the drivable distance and optimize the charging schedule and route to the destination. The feasibility of the proposed system was verified through test runs of electric motorcycles. In considering local environmental characteristics in Tanzania for the operation of the electric mobility system, factors such as eco-friendliness, economic feasibility, ease of operation, and compatibility should be weighed. The smart electric mobility operating system proposed in this study can be an important basis for implementing the SDGs' climate change response.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.669-681
• /
• 2023

Studies have tried to apply remote sensing technology, a non-destructive survey method, instead of the existing destructive survey, which requires relatively large labor input and a long time to estimate chlorophyll content, which is an important indicator for evaluating the growth of fruit trees. This study was conducted to non-destructively evaluate the chlorophyll content of pear tree leaves using unmanned aerial vehicle-based hyperspectral imagery for two years(2021, 2022). The reflectance of the single bands of the pear tree canopy extracted through image processing was band rationed to minimize unstable radiation effects depending on time changes. The estimation (calibration and validation) models were developed using machine learning algorithms of elastic-net, k-nearest neighbors(KNN), and support vector machine with band ratios as input variables. By comparing the performance of estimation models based on full band ratios, key band ratios that are advantageous for reducing computational costs and improving reproducibility were selected. As a result, for all machine learning models, when calibration of coefficient of determination (R²)≥0.67, root mean squared error (RMSE)≤1.22 ㎍/cm², relative error (RE)≤17.9% and validation of R²≥0.56, RMSE≤1.41 ㎍/cm², RE≤20.7% using full band ratios were compared, four key band ratios were selected. There was relatively no significant difference in validation performance between machine learning models. Therefore, the KNN model with the highest calibration performance was used as the standard, and its key band ratios were 710/714, 718/722, 754/758, and 758/762 nm. The performance of calibration showed R²=0.80, RMSE=0.94 ㎍/cm², RE=13.9%, and validation showed R²=0.57, RMSE=1.40 ㎍/cm², RE=20.5%. Although the performance results based on validation were not sufficient to estimate the chlorophyll content of pear tree leaves, it is meaningful that key band ratios were selected as a standard for future research. To improve estimation performance, it is necessary to continuously secure additional datasets and improve the estimation model by reproducing it in actual orchards. In future research, it is necessary to continuously secure additional datasets to improve estimation performance, verify the reliability of the selected key band ratios, and upgrade the estimation model to be reproducible in actual orchards.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.459-470
• /
• 2007

Domestically, finishing pigs are marketed at 110 kg on an average. However, it is thought to be feasible to increase the market weight to 120kg or greater without decreasing the carcass quality, because most domestic pigs for pork production have descended from lean-type lineages. The present study was undertaken to investigate the growth efficiency and profitability of ‘high’-market wt pigs and the physicochemical characteristics and consumers' acceptability of the high-wt carcass. A total of 96 (Yorkshire × Landrace) × Duroc-crossbred gilts and barrows were fed a finisher diet ad laibtum in 16 pens beginning from 90-kg BW, after which the animals were slaughtered at 110kg (control) or ‘high’ market wt (135 and 125kg in gilts & barrows, respectively) and their carcasses were analyzed. Average daily gain and gain:feed did not differ between the two sex or market wt groups, whereas average daily feed intake was greater in the barrow and high market wt groups than in the gilt and 110-kg market wt groups, respectively(P<0.01). Backfat thickness of the high-market wt gilts and barrows corrected for 135 and 125-kg live wt, which were 23.7 and 22.5 mm, respectively, were greater (P<0.01) than their corresponding 110-kg counterparts(19.7 & 21.1 mm). Percentages of the trimmed primal cuts per total trimmed lean (w/w), except for that of loin, differed statistically (P<0.05) between two sex or market wt groups, but their numerical differences were rather small. Crude protein content of the loin was greater in the high vs. 110-kg market group (P<0.01), but crude fat and moisture contents and other physicochemical characteristics including the color of this primal cut were not different between the two sexes or market weights. Aroma, marbling and overall acceptability scores were greater in the high vs. 110-kg market wt group in sensory evaluation for fresh loin (P<0.01); however, overall acceptabilities for cooked loin, belly and ham were not different between the two market wt groups. Marginal profits of the 135- and 125-kg high-market wt gilt and barrow relative to their corresponding 110-kg ones were approximately -35,000 and 3,500 wons per head under the current carcass grading standard and price. However, if it had not been for the upper wt limits for the A- and B-grade carcasses, marginal profits of the high market wt gilt and barrow would have amounted to 22,000 and 11,000 wons per head, respectively. In summary, 120～125-kg market pigs are likely to meet the consumers' preference better than the 110-kg ones and also bring a profit equal to or slightly greater than that of the latter even under the current carcass grading standard. Moreover, if only the upper wt limits of the A- & B-grade carcasses were removed or increased to accommodate the high-wt carcass, the optimum market weights for the gilt and barrow would fall upon their target weights of the present study, i.e. 135 and 125 kg, respectively.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.124-134
• /
• 2019

An analytical method was developed for the determination of broflanilide and its metabolites in agricultural products. Sample preparation was conducted using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method and LC-MS/MS (liquid chromatograph-tandem mass spectrometer). The analytes were extracted with acetonitrile and cleaned up using d-SPE (dispersive solid phase extraction) sorbents such as anhydrous magnesium sulfate, primary secondary amine (PSA) and octadecyl ($C_{18}$). The limit of detection (LOD) and quantification (LOQ) were 0.004 and 0.01 mg/kg, respectively. The recovery results for broflanilide, DM-8007 and S(PFP-OH)-8007 ranged between 90.7 to 113.7%, 88.2 to 109.7% and 79.8 to 97.8% at different concentration levels (LOQ, 10LOQ, 50LOQ) with relative standard deviation (RSD) less than 8.8%. The inter-laboratory study recovery results for broflanilide and DM-8007 and S (PFP-OH)-8007 ranged between 86.3 to 109.1%, 87.8 to 109.7% and 78.8 to 102.1%, and RSD values were also below 21%. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and the Food and Drug Safety Evaluation guidelines (2016). Therefore, the proposed analytical method was accurate, effective and sensitive for broflanilide determination in agricultural commodities.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.26 no.4
• /
• pp.30-47
• /
• 2013

Objectives: The purpose of the present study is to investigate anti-depressive effects of Samul-tanggahyangbuja (SGH) on ovariectomized and chronic mild stress (CMS) induced rats. Methods: Ovariectomized rats were exposed to CMS for 4 weeks. Changes of depression behavior were tested by using sucrose intake test (SIT), elevated plus maze (EPM), forced swimming test (FST) and Morris water maze test (MWMT) in rats until being orally medicated with SGH (100 or 400 mg/kg/day). In addition, the serum levels of corticosterone (CORT), IL-4, IL-$1{\beta}$ and changes of 5-HT in the brain were measured. Results: 1. SGH 400 mg/kg treated group (SGH 400) significantly increased amount of sucrose intake compared with the control group (p<0.05). 2. SGH 100 mg/kg treated group (SGH 100) and SGH 400 significantly increased the time spent in the open arms of the EPM compared with the control group (p<0.01). SGH 400 also significantly increased the number of crossing of the open and closed arms compared with the control group (p<0.05). 3. SGH significantly shortened the immobility time in FST compared with the control group (SGH 100 p<0.05, SGH 400 p<0.01). 4. SGH significantly increased performance of acquisition trials compared with the control group (p<0.05, on day 4, 5 of SGH 100 and 400). SGH 400 also significantly increased performance of retention trials compared with the control group (p<0.05). 5. The serum levels of corticosterone and IL-4 were not significantly different among the groups. There were no changes on the serum levels of corticosterone, IL-$1{\beta}$ and IL-4 after administration with SGH. 6. SGH 400 significantly increased the level of 5-HT in the hippocampus compared with the control group (p<0.05). SGH significantly increased the levels of 5-HT in the hypothalamus compared with the control group (SGH 100 p<0.05, SGH 400 p<0.01). Conclusions: These results suggest that SGH has the anti-depressive effect on ovariectomized rat and affect 5-HT system rather than hypothalamic-pituitary-adrenal (HPA) axis and immune system.