• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.26-35
• /
• 2016

As a potential clean energy resource, the production and consumption of hydrogen gas are expected to gradually increase, so that hydrogen related studies are also increasing. The thermal and chemical properties of hydrogen result in its high flammability; in particular, there is a high risk if leaks occur within an enclosed space. In this study, we applied the computational fluid dynamics method to conduct a numerical study on the leakage behavior of hydrogen gas and compared these numerical study results with an experimental study. The leakage hole diameter was selected as an important parameter and the hydrogen gas dispersion behavior in an enclosed space was investigated through various analytical methods. Moreover, the flammable regions were investigated as a function of the leakage time and leakage hole size. We found that the growth rate of the flammable region increases rapidly with increasing leakage hole size. We also investigated the relation between the mass flow rate and the critical time when the hydrogen gas reaches the ceiling. The analysis of the monitoring points showed that the hydrogen gas dispersion behavior is isotropic and independent of the geometry. We found that the concentration of gas in an enclosed space is affected by both the leakage flow rate and amount of gas accumulated in the enclosure.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.264-274
• /
• 2020

The Ro-Ro ferry ship capsized and sank to the bottom of the sea because of the rapid turning for several reasons, such as lack of stability due to the center of gravity rise from the extension and rebuilding of the stern cabin, excessive cargo loading, and shortage ballast, poor lashing, etc. The purpose of this study was to investigate and analyze the cause of the ship's rapid flooding, capsizing, and sinking accident according to rapid turning scientifically and accurately using the Fluid-Structure Interaction( FSI) analysis technique. Several tests were conducted for this cause investigation of the flooding and sinking accident correctly and objectively, such as the realization of the accurate ship posture tracks according to the accident time using several accident movies and photos, the validation of cargo moving track, and sea water inflow amount through the exterior openings and interior paths compared with the ship's posture according to the accident time using the floating simulation and hydrostatic characteristics program calculation, and the performance of a full-scale ship flooding·sinking simulation.

• Korean Security Journal
• /
• no.42
• /
• pp.179-203
• /
• 2015

Nowadays college students in South Korea experience much stress related to job search due to the continuing unemployment crisis. Particularly, students who hold a degree in Security Services suffer from such stress at a higher level compared to other students because of the specific qualifications sought by potential employers. Therefore, this study investigates the effect of the stress related to job search on career maturity among the students of Security Services. The authors surveyed 250 students of Security Services from 7 colleges in Gyeonggi, Jeolla, and Gyeongsang provinces. Before distributing the questionnaire, its validity and reliability were assessed through the consultations with experts in the related fields. The data collected was examined via various statistical methods, including factor, reliability, correlation, and regression analyses using SPSS 20.0. The results indicated that socio-demographic characteristics affected job search stress and career maturity. Additionally, it was found that the job search-related stress of the students influenced their career maturity. To illustrate, job search stress and career maturity were positively related. Based on the results of the analyses, the authors confirm that the students of Security Services are suffering from a high level of stress resulting from job search, which impacts their career selection. Finally, policy implications are discussed, including alleviating the stress by providing diversified career choices to the students.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.18-31
• /
• 1989

To analyze the impact of air pollution control on electricity generation cost, a computer program was developed. POGEN calculates levelized discounted power generation cost including additional air pollution control cost for coal power plant. Pollution subprogram calculates total capital and variable costs using governing equations for flue gas control. The costs are used as additional input for levelized discounted power generation cost subprogram. Pollution output for Rue Gas Desulphurization direct cost was verified using published cost data of well experienced industrialized countries. The power generation costs for the year 2001 were estimated by POGEN for three different regulatory scenarios imposed on coal power plant, and by levelized discounted power generation cost subprogram for nuclear power. Because of uncertainty expected in input variables for future plants, sensitivity and uncertainty analysis were made to check the importance and uncertainty propagation of the input variables using Latin Hypercube Sampling and Multiple Least Square method. Most sensitive parameter for levelized discounted power generation cost is discount rate for both nuclear and coal. The control cost for flue gas alone reaches additional 9-11 mills/kWh with standard deviation less than 1.3 mills/kWh. This cost will be nearly 20% of power generation cost and 40% of one GW capacity coal power plant investment cost. With 90% confidence, the generation cost of nuclear power plant will be 32.6-51.9 mills/kWh, and for the coal power plant it will be 45.5-50.5 mills/kWh. Nuclear is favorable with 95% confidence under stringent future regulatory requirement in Korea.

• Journal of Korea Water Resources Association
• /
• v.32 no.2
• /
• pp.111-120
• /
• 1999

The relationship between EI Nino-Southern Oscillation(ENSO) and drought in Korea is investigated using the cross correlation analysis. In this paper, Palmer Drought Severity Index(PDSI) is used as an index of drought and nine ENSO indicators are used. To obtain PDSI for Korea, the PDSI equation is derived using monthly precipitation and temperature in Korea. In addition, ENSO composite percentile analyses for PDSI, precipitation and streamflow in Korea are performed to verify the results of the cross correlation. Results of the cross correlation show that the link between drought in Korea and ENSO is statistically significant with 6% of the variance in PDSI for Korea explained by ENSO. The PDSI is negatively correlated with the equatorial Pacific Sea Surface Temperature and the Sea Level Pressure(SLP) at Darwin leading by about 16 months. However, the relationship of the PDSI with the Southern Oscillation Index and the SLP at Tahiti is positive correlation. The ENSO composite percentile analyses show that drought, precipitation and streamflow in Korea are associated with ENSO during 6 months from December of the ENSO ending year

• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.187-190
• /
• 2016

This study was conducted to determine phytotoxicity of domestic rice varieties and characteristic of sensitive gene involved in herbicide reaction of 4-HPPD (4-hydroxy phenylpyruvate dioxygenase) inhibiting herbicides. The five rice varieties were grown for 2 to 3 leaf stage on seedling trays and then transplanted into plastic pot: 4-Japonica type (Sangjubyeo, Sambaekbyeo, Sanduljinmi and Kumyoung) varieties and 1-Indica type variety (IR8). We trialled standard (14 g a.i. $10a^{-1}$) and double fold (28 g a.i. $10a^{-1}$) dose of benzobicyclon treatment at 10 days after transplanting in order to investigate phytoxicity. The Japonica-type Sangjubyeo showed no rice injury but Indica-type IR8 show 4-5 (standard) and 5-6 (double fold) phytoxicity levels. In spite of Japonica-type, Sanduljinmi and kumyoung showed 3-4 and 4-5 levels. Target resistant gene, Hydroxyphenylpyruvate dioxygenase inhibitor sensitive gene No.1 (HIS1) have been isolated from five domestic rice cultivars (Sangjubyeo, Sambaekbyeo, Sanduljinmi, Kumyoung and IR8). Results of the sequence through PCR, all five tested rice cultivars had HIS1 gene regardless to rice cultivars. And the difference between rice varieties from sequence of HIS1 were identified some variation in genes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.11
• /
• pp.915-924
• /
• 2014

In an aero gas-turbine engine, a surface air-oil heat exchanger (SAOHE) is used to cool the oil system for the gearboxes and electric generators. The SAOHE is installed inside the fan casing of the engine in order to dissipate the heat from the oil system into the bypass duct stream. The purpose of this study was to develop an effective numerical method for designing an SAOHE for an aero gas-turbine engine. A two-dimensional model using a porous medium was developed to evaluate the aero-thermal performance of the fins of the heat exchanger, and a one-dimensional flow and thermal network program was developed to save time and cost in the evaluation of the heat exchanger performance. Using this network program, the pressure drop and heat transfer performance of the heat exchanger were predicted, and the results were compared with two-dimensional computational fluid dynamics results and experiment data for validation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.176-183
• /
• 2014

Acoustic emission testing (AET) of cylinders is advantageous in that it can be directly conducted on cylinders installed in a car, without needing to dissemble them on a real-time basis. Therefore, users prefer AET over other nondestructive testing methods. Owing to these advantages of AET, it has been approved by the Department of Transportation of the U.S. as a safety evaluation method for pressure containers or as an alternative to the hydroproof testing method. This paper presents a study of the quantitative evaluation criteria for a container having ultrasonic testing defects and also for Type 1 and Type 2 gas cylinders, which are defective seamless pressure containers provided by NK, a manufacturer of pressure containers. For the Type 1 cylinder, the process from crack growth to leak was observed in a repetitive fatigue test using a 113 L container according to ASTM E 1419-02. Further, for the Type 2 cylinder, integrity was evaluated using a 119 L sound container and a container damaged by hydraulic pressure, by the slow-fill method according to ASTM E 2191-02. Based on the AET results of the Type 1 and Type 2 cylinders, quantitative evaluation criteria were established for a defective and non-defective container.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4924-4931
• /
• 2011

This research performed to evaluate a production processes reporting by the HACCP system of green vegetable juice products, containing lactic acid bacteria, stage of processing raw materials agricultural products and production facilities of general bacteria and pathogenic micro organism. General bacteria are found from four samples of storage of agricultural products at process stage and water was detected 8.67~14.67 CFU/ml. However, all samples were detected less than 105 CFU/ml as a legal standards after the process of UV sterilization. For the outcome of experiment of E.coli, E.coli O157:H7, B.cereus, L.moonocytogenes, Salmonella spp, Staph.aureus as the food poisoning bacterial, E.coli was detected until UV pre-step process in storage process and B.cereus was detected partly till 1st washing. Since all bacterial, Yeast and Mold are detected in main materials, pre-control method is a necessary to establish for decreasing with a number of initial bacteria of main materials and it is considered to establish the effective ways of washing and sterilization such as production facilities for cross contamination prevention of bacteria and Sthaphylococcus. Based on above results, the process of UV sterilization should be managed with CCP as an important process to reduce or eliminate the general and food poisoning bacterial of green vegetable juice products, including lactic acid bacteria. Therefore, it is considered to need an exhaustive HACCP plan such as control manual of UV sterilization, solution method, verification, education and training and record management.