• 제목/요약/키워드: 수행경로 분석

Search Result 1,167, Processing Time 0.028 seconds

Analysis of Effect of the Ship's Route Exchange through the Ship Handling Simulation (선박조종 시뮬레이션을 통한 선박 경로 교환의 효과 분석)

  • Paek, Yun-Ji;Jung, Chang-Hyun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.24 no.1
    • /
    • pp.10-17
    • /
    • 2018
  • To prepare the integrated safety management system 'e-navigation', research is being conducted on the route exchange for sharing intended routes between ship and ship, and between ship and land. But they don't have enough specific grounds for the effects of route exchange and the necessity of its introduction and focus on technical aspects like the implementation of route exchange. This study tried to quantitatively analyze the effects of route exchange on sailing safety with the use of ship handling simulation, integrate simulation performers' subjective evaluations, and investigate the effects of route exchange. The ship-to-ship route exchange resulted in the initial collision avoidance action time was 3.43 minutes faster, the collision avoidance direction change rate was 60 %, the proximity to target A was 31 %, and Mean Rudder Angle Index decreased by 57 %. In addition, 95 % of the survey respondents had an effect on the decision making of collision avoidance, 85 % had a positive impact on safety navigation, 90 % had an accident prevention effect, 70 % reduced the psychological burden of officers, and 70 % should be introduced in practice.

An Efficient Multipath Routing with Dynamic Load Balancing (효율적인 동적 부하 균등 분산을 적용한 다중 경로 라우팅)

  • Jung, Sun;Lee, Mee-Jeong
    • Journal of KIISE:Information Networking
    • /
    • v.28 no.3
    • /
    • pp.406-416
    • /
    • 2001
  • Single path routing schemes using dynamic routing metric amy find out the dynamic network status and recompute paths to keep the traffic from the highly loaded regions of the network. This type of routing approach, however, may lead to a routing oscillation, and further, it cannot exploit multi-paths that may frequently exist in the real network. We propose a multipath routing scheme with dynamic load balancing, called MP-DLB, which is capable of reducing the overhead incurred by the multipath routing with dynamic load balancing approach while taking advantage of the high routing performance provided by the approach. According to the analysis of Internet packet traces which show that a high percentage of network traffic is destined for a small number of networks, MP-DLB applies the multipath routing with dynamic load balancing only to a limited subset of all the destinations in the network. For the rest of the destinations, it applies traditional single path routing scheme. This approach may reduce overall routing overheads by limiting the number of destinations to apply the more complicated routing scheme while it can keep the routing performance high by providing efficient routing for the most significant traffic in the routing performance. A series of simulations are done to analyze the performance of MP-DLB. The simulation results show that MP-DLB may effectively cope with the congestion and achieve high routing performance by distributing traffic streams that are generated from varying sources and heading toward a specific hot destination over multi-paths.

  • PDF

LSTM-based Particulate Matter prediction for efficient road scattering dust removal path proposal (효율적인 도로 비산먼지 제거 경로 제안을 위한 LSTM 기반 미세먼지 예측)

  • Lim, DongJin;Kim, Taehong;Lee, Ryong;Jung, Hanmin
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2017.11a
    • /
    • pp.1258-1261
    • /
    • 2017
  • 1급 발암물질인 미세먼지 중 44.3%를 차지하고 있는 도로 비산먼지는 효과적인 미세먼지 농도 저감 대책의 방안 중 하나이다. 도로 비산먼지 제거는 일반적으로 특수 차량을 이용, 정해진 경로와 주기에 따라 운행된다. 이러한 운행방식은 도로의 오염 현황에 따른 효과적 경로 선정 및 운영이 어렵다. 본 논문에서는 도로 비산먼지 제거의 효율적인 경로 제안을 위해 대구지역에 분포된 KISTI 이동형 도시센싱 테스트베드에서 수집되는 고해상도의 실시간 지역별 오염 현황 데이터를 활용하여 실시간 오염도를 분석하고, LSTM(LONG SHORT-TERM MEMORY) 알고리즘을 활용하여 미래의 미세먼지 농도를 예측하였다. 기존 연구와 달리 지역별 상황을 고려한 데이터를 사용하여 선형 회귀 분석을 수행하였다. 실험 결과, 시간 속성을 고려한 LSTM이 MLP 보다 평균 제곱근 오차 값이 경우에 따라 최대 30% 더 작음을 확인했다. 본 연구를 기반으로 고해상도 사물 데이터 기반 예측 연구의 가능성을 보였으며, 미세먼지 예측 결과를 활용 유연하고 효과적인 도로 청소차량의 운행 경로를 설정에 활용될 수 있을 것으로 기대한다.

MIB-II based Algorithm for hierarchical network analysis and detection of detour routing paths (MIB-II 기반 계층적 네트워크 구조 분석 및 패킷우회 검출 알고리즘)

  • 김진천
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.7 no.7
    • /
    • pp.1442-1448
    • /
    • 2003
  • Network Management become more and more important issue in the network environment in which many applications such as Mail, teleconferencing, WWW and database software are operated. It can be possible for The Bridge and Router forwarding data to select next hop device which results in routing incorrect path from the viewpoint of network design. In this paper we address the problem of finding the detour routing path due to incorrect setting on routing devices. We propose the new algorithm for finding detour muting path based on hierarchical network structure analysis using information from SNMP MIB. To prove the correctness of the unposed algorithm we have done simulation with predefined data. Simulation results show that the algorithm finds detour path correctly.

A Method to reduce time of path planning optimization for AOI machines (AOI 검사기의 경로 계획 최척화 처리 시간 단축 방안)

  • Baek, Sunwoo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2016.10a
    • /
    • pp.518-519
    • /
    • 2016
  • AOI 검사기는 SMT 공정 상에서 PCB (printed Circuit Board) 상의 부품들을 카메라로 촬영하고 촬영된 영상을 2D 혹은 3D 형태의 이미지로 재구성하고 분석하여 이상 여무를 판단하는 장비다. 검사를 하고자 하는 PCB의 크기가 카메라가 촬영할 수 있는 영역 보다 큰 경우가 대부분이기 때문에 PCB 상에 마운트 되어 있는 부품들을 모두 촬영하기 위해서는 여러 차례 나누어 촬영해야 할 필요가 있으며 이 때문에 PCB 상에 촬영해야 하는 부품들을 가능한 FOV에 많이 포함될 수 있도록 여러 FOV 영역으로 나누고 이렇게 나누어진 FOV 영역들을 최적의 경로로 이동하며 촬영할 수 있도록 하기 위한 알고리즘이 필요하다. 기존 논문들은 대부분 이 문제를 해결하기 위한 알고리즘에 대해 다루어 왔다. 일반적으로 생산이 진행되는 시점에서는 검사해야 할 PCB에 대한 정보 (PCB의 크기, 부품의 위치, 크기, 종류 등)는 이미 정해져 있기 때문에 경로 계획 최적화 수행은 PCB 정보에 변동이 없다면 한차례만 하면 된다. 하지만 검사를 할 수 있도록 Teaching 하는 단계에서는 PCB 정보가 지속적으로 변경될 수 있으며 이에 따라 최적화를 여러 차례 수행해야 할 필요성이 있다. 최적화를 위한 처리 시간은 부품의 개수, PCB 상에서의 분포정도등에 따라 증가하기 때문에 PCB 정보가 변경될 때 마다 최적화를 수행하게 되면 비효율적으로 처리 시간이 증가하게 된다. 본 논문에서는 이 문제에 대해 연구하고 해결책을 제시하였다.

Algorithm for Forward Simulation of Ocean Acoustic Tomography in the East Sea of Korea (동해에서 해양음향 토모그래피 수행을 위한 Forward 모의 알고리즘)

  • Oh Sunta다;Na Jungyul;Choi Jee-Woong;Park Jung-Soo;Kim Young-Gyu;Na Young-Nam;Choi Jin-Hyuk
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.245-248
    • /
    • 2000
  • 해양음향 토모그래피 수행을 위해 필수적인 Forward 모의 알고리즘을 연구를 통해 Forward 문제에서의 선결문제(음파 전달경로의 안정성, 식별능력 및 분해능)를 고잘하였다. 이를 위해 동해의 기존 관측 자료를 이용하여 평균해양에 대한 음속구조 및 EOF 분석을 수행, 재현된 음속구조를 이용, 음선 모델에 의한 고유음선 정보를 파악하여 고유음선의 도달경로 및 도달시간의 비교를 시도하였다.

  • PDF

동적섭식경로모델의 불확실성 및 민감도분석

  • 황원태;한문희;김은한;서경석;조규성
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05a
    • /
    • pp.911-918
    • /
    • 1995
  • 동적섭식경로모델을 사용하여 "목초$\longrightarrow$우유$\longrightarrow$사람"의 핵종이동 경로에 대해 침적시점에 따른 입력변수의 민감도와 결과에 대한 불확실성분석을 수행하였다. Cs-137과 Sr-90의 경우 모든 침적시점에 대해 재부유인자가 가장 높은 중요도를 보였다. 두 핵종에 대해 침적시점에 따른 입력변수의 중요도의 변화는 비슷한 유형을 보였다. 목초의 성장기에서 전이율이 상대적으로 중요도가 높았고, Cs-137의 전이율은 Sr-90의 경우보다 높은 중요도를 나타냈다. 목초의 비성장기에서 Sr-90에 대한 농축인자의 중요도는 매우 높았다. Cs-137과 Sr-90에 의한 피폭선량의 95% 신뢰도구간은 약 1 $\times$ $10^1$, 5 $\times$ $10^1$ 범위를 나타냈다. 범위를 나타냈다.

  • PDF

An Efficient XML Query Processing Method using Path Containment Relationships (경로 포함 관계를 이용한 효율적인 XML 질의 처리기법)

  • 민경섭;김형주
    • Journal of KIISE:Databases
    • /
    • v.31 no.2
    • /
    • pp.183-194
    • /
    • 2004
  • As XML is a do facto standard for a data exchange language, there have been several researches on efficient processing XML queries. The most important thing to consider when processing XML queries is how efficiently we can process path expressions in queries. Some previous works make results by performing a sequence of join operations on all records corresponding to labels in the path expression. Others works check the existence of paths in the query using an RDBMS's string comparison operator and make results by extracting the records corresponding to the paths. In this paper we suggested a new query planning algorithm based on path containment relationships and two join operators supporting the planning algorithm. The join operators use only the records related to the paths in a query as input data, scan them only once, and generate result data using a pipelining mechanism. By analysis and experiments, we confirmed that our techniques(a new query planning algorithm and two join operators) achieved significantly higher performance than other previous works.

Analysis of Optimal Infiltraction Route using Genetic Algorithm (유전자 알고리즘을 이용한 최적침투경로 분석)

  • Bang, Soo-Nam;Sohn, Hyong-Gyoo;Kim, Sang-Pil;Kim, Chang-Jae;Heo, Joon
    • Korean Journal of Remote Sensing
    • /
    • v.27 no.1
    • /
    • pp.59-68
    • /
    • 2011
  • The analysis of optimal infiltration path is one of the representative fields in which the GIS technology can be useful for the military purpose. Usually the analysis of the optimal path is done with network data. However, for military purpose, it often needs to be done with raster data. Because raster data needs far more computation than network data, it is difficult to apply the methods usually used in network data, such as Dijkstra algorithm. The genetic algorithm, which has shown great outcomes in optimization problems, was applied. It was used to minimize the detection probability of infiltration route. 2D binary array genes and its crossover and mutation were suggested to solve this problem with raster data. 30 tests were performed for each population size, 500, 1000, 2000, and 3000. With each generation, more adoptable routes survived and made their children routes. Results indicate that as the generations increased, average detection probability decreased and the routes converged to the optimal path. Also, as the population size increases, more optimal routes were found. The suggested genetic algorithm successfully finds the optimal infiltration route, and it shows better performance with larger population.

Analysis of Income-led Growth Path Induced by Government and Consumption Expenditures (정부지출과 소비지출에 의한 소득주도성장 경로 분석)

  • Rhee, Hyun-Jae
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.7
    • /
    • pp.602-617
    • /
    • 2020
  • The aim of this study is to evaluate the effects of income-led growth path induced by government and consumption expenditures. Six of Nordic countries, Latin American countries and South Korea are selected for this purpose due to the fact that these countries have been pursuing income-led growth policy for more than the last decade except South Korea. The structural equation is formulated based on the government and consumption expenditures with lagged variable, and the GLMs estimation is employed for empirical analysis. Although the impacts are not overwhelmingly effective, empirical evidence suggests that income-led growth path contributes to stimulate economic activities which are associated with increasing in national income in Nordic countries and South Korea. However, the income-led growth path is quite weakly operated. Furthermore, it is even unstable in Latin American countries. In addition to this, the policy target would rather be focused on middle consumption group than low consumption group. Overall, it would be concluded that the income-led growth policy should be implemented for complementary purpose. And, it also has to be mentioned that sustainable growth may not be achievable by this policy.