• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.154-160
• /
• 2020

This paper presents a grid current control algorithm for a grid connected inverter (GCI) system in a stationary reference frame. When a Proportional Integral (PI) controller at a stationary reference frame is used in a GCI system, steady state error and phase lags are presented because AC signals are controlled at a stationary reference frame. In this paper, a feedforward controller is applied to the PI controller to compensate the steady state error and phase lags by improving command tracking performance. In addition, disturbance rejection control is applied to the PI controller to protect the GCI system by eliminating disturbance, grid voltage in a GCI system, when a grid fault such as line-to-line fault, happens. The proposed GCI current control algorithm is analyzed in a frequency domain and a simulation model of the proposed GCI current control system is developed for verification of the performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.175-182
• /
• 2018

As Internet of things with a large number of nodes emerges, wireless-power communication networks (WPCN) based on a random access protocol needs to be investigated. In the random access-based WPCN, a terminal accessing later in given random access (RA) slots can harvest more energy before transmission and thus can transmit data with higher power and achieve higher throughput if the access is successful. On the basis of this property, the proposed random access control protocol gives the terminals priority and distinguishes the RA slots according to the priority level, so that a near terminal with access point allows to access preferentially other than a remote terminal. This operation decreases the throughput of near terminal and increases the throughput of remote terminal, and then, the doubly near-far problem in WPCN is resolved and the user fairness is improved. Results show that the proposed random access control improves both channel throughput and user fairness according to the priority level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.62-69
• /
• 2005

Efforts for standardization of medium access control (MAC) protocol in IEEE802.11e have been made to support quality of service (QoS) in IEEE802.11e MAC protocol. Enhanced disoibuted coordination function (EDCF) of 802.11e MAC protocol is modified to support QoS for packets that have differentiated priority. However, EDCF still has the problem of throughput optimization and priority support. Therefore, we have proposed a scheme called adaptive EDCF for both supporting priority of packets and throughput optimization. We have derived the relation between the number of nodes and contention window size for throughput optimization. Based on the analytic results, we have evaluated the performance of the proposed scheme using OPNET simulations. The simulation results show that using the proposed scheme can improve the overall throughput regardless of the number of nodes and the decrement of the throughput with increasing the number of nodes can be alleviated. Additionally, we have shown that the adaptive EDCF can support priority of packets more effectively than existing EDCF.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.219-228
• /
• 2010

A two-dimensional mathematical model was developed to predict the temperature and moisture-content profiles of a tumble dryer during infrared drying. The model is based on the movements of liquid water and moisture in the object and on the fluid and heat transfer in the drying air. The model was solved by the finite volume analysis for the fluid, temperature, and radiation intensity fields. After deriving the governing equations and developing the two-dimensional tumble dryer models, numerical investigations were carried out to examine the effects of various parameters such as the heater temperature and the heating patterns on the drying mechanism of the tumble dryer. All the results show that the drying time can be reduced by using the IR heater.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.3
• /
• pp.245-252
• /
• 2007

The important problems from the point of view of preventing global warming are to save the power consumption of automotive air-conditioning systems and reduce the refrigerant amount filled. To achieve such requirements, integral receiver/dryer (R/D) condensers were developed recently. Typical integral R/D condensers have extra headers that play the role of R/D. Except an extra header and somewhat complex tube array resulting from the extra header, the most integral R/D condensers have almost the same specification that tube has multi channels, fin has louvers, flow in tube is parallel, etc. When integral condensers are applied, it is known that the refrigerating effect increases, resulting from the increase of subcooling degree in condenser, and the refrigerant amount used saves. In spite of several merits, integral condensers have not been applied a lot. That is why there is an uncertainty in performance, using integral condensers. The objective of this study is to theoretically optimize the tube array in an integral R/D condenser that is really being applied to some vehicles. The tube array has a great effect on the performance of the integral condenser as well as common ones. Through computer simulation, we could see that the tube array, 14-6-3-5-3-4, in the same condenser was the best, comparing heat release rate, pressure drop, etc. to the real array, 17-5-3-3-2-5. It should be noted that the optimization is based on the condenser performance only.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1078-1087
• /
• 2014

In the conventional centralized mobility management schemes, it can lead to single points of failure, occurrence of a bottleneck, since all data and control are concentrated on the mobility anchor which is located in home network. In the current research of distributed mobility management, it is doing research into distributed mobility management which is supported by distributed mobility anchors. Such schemes do not consider a failure of the mobility anchor. However, it could be an issue under tactical environment since it occur non-service problem due to anchor movement, maintenance, failure, etc. In this paper, we proposed new DMM scheme named T-DMM(Tactical-Distributed Mobility Management) which can support handover even if mobility anchor breaks down. From the numerical analysis, we evaluate signaling cost and handover latency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1085-1094
• /
• 1999

In the global system for the mobile communication (GSM) system, the class of training sequences used in a TDMA frame is a preamble sequence with a period of 16 bits for the channel impulse response measurement and the start up equalization during the training period. If the transmitted preamble sequence and the binary sequence in the receiver properly satisfy a condition, this training sequences used for fastly adjusting the tap coefficients and impulse response can be measured by calculating the crosscorrelation function. In this paper, it is used that training sequences have zero values of the autocorrelation at all delays except zero and middle shifts. A comparison of convergence rate, a mathematical approach for fast start-up equalization and correctly channel impulse response measurement are proposed.

• Journal of Korea Game Society
• /
• v.13 no.2
• /
• pp.39-48
• /
• 2013

In MMORPGs(Massively Multi-player Online Role-Playing Games) a large number of players actively interact with one another in a virtual world. Therefore MMORGs must be able to quickly process real-time access requests and process requests from numerous gaming users. A key challenge is that the workload of the game server increases as the number of gaming users increases. To address this workload problem, many developers apply with distributed server architectures which use dynamic map partitioning and load balancing according to the server function. Therefore most MMORPG servers partition a virtual world into zones and each zone runs on multiple game servers. These methods cause of players frequently move between game servers, which imposes high overhead for data updates. In this paper, we propose a new architecture that apply with an arithmetic server dedicated to data operation. This architecture enables the existing game servers to process more access and job requests by reducing the load. Through mathematical modeling and experimental results, we show that our scheme yields higher efficiency than the existing ones.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.262-266
• /
• 2009

Since high speed and precision control shoud be satisfied in the position control system, the DC servo motor with easy control and satisfactory response characteristic is used. The various studies of position control techniques have been proposed in order to improve the control performance in the position control system. In this paper, the design method for a position control is suggested for constructing the PD controller in I-PD control system. The coefficients of PD controller in the I-PD control system are determined by using the transfer function which is normalized. Stability and root conditions of the system are derived from mathematical technique. From the result of computer simulation in I-PD control system by applying this control technique, is investigated by the method of proposed design the effectiveness of system response characteristic for input and disturbance.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.461-470
• /
• 2006

Recently mobile Stream Control Transmission Protocol (mSCTP) has been proposed as a transport layer approach for supporting mobility. When a mobile terminal (MT) is not located in the home network. a terminal that wishes to communicate with the MT is not able to establish mSCTP association to the MT, since mSCTP does not include the location management mechanism. In order to solve this problem. an interworking approach using the Session Initiation Protocol (SIP) INVITE method has been proposed. However, this approach has shown subsequent delay in acquiring the current location information of the MT when initiating mSCTP association establishment. In this paper, we propose new SIP methods and an approach that minimizes the address acquisition delay (AAD) by utilizing those SIP methods. Mathematical analysis and simulation results show that the proposed approach is more efficient than the previous approach in terms of AAD in all kinds of SIP environments.