• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.315-318
• /
• 2008

Numerical calculation for the 1MW class horizontal axis wind turbine blade has been carried out to estimate the magnitude between discrete noise and random noise. Farassat formula 1A was adopted to get the discrete noise signal, and blade element momentum theory was used to obtain the distribution of the aerodynamic data along the blade span. Fukano's approach was also adopted to calculate the unsteady aerodynamic random noise due to the Karman vortex generation at the trailing edge of the wind turbine blade. From the noise prediction for the 1MW class horizontal axis wind turbine, the frequency band of the discrete noise lies in the infrasound region, and that of the random noise lies in the audible band region.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.575-578
• /
• 2005

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The lift and the drag coefficient of S-809 airfoil were predicted via X-FOIL and also the post stall characteristics of S-809 were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the wind tunnel test results, performed by Sommers in Delft university of technology. The rated power of the testing rotor is 20kW(FIL-20) at design conditions. The experimental aerodynamic parameters and the X-FOIL data were used for the power prediction of the FIL-20 respectively. The comparison results shows good agreement in power prediction.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.60.2-60.2
• /
• 2011

This study is to develop a 1kW-class small wind turbine blade which will be applicable to relatively low speed regions. For this blade, a high efficiency wind turbine blade is designed and a light and low cost composite structure blade is adopted considering fatigue life. In this study, shape design of 1kW-class small wind turbine blade for hybrid power generation system is carried out by BEMT(blade element momentum theory). X-FOIL open software was used to acquire lift and drag coefficients of the 2D airfoils used in power prediction procedure. Moreover, pressure and velocity distributions are investigated according to TSR by CFD analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.409-413
• /
• 2007

To assure the structural integrity for the hub and low speed shaft (LSS) of the drive train, it is necessary to obtain the ultimate aerodynamic loads acting on the wind turbine blade. The aim of this study is to predict the time histories of 3 forces and 3 moments at the hub and the LSS based on the design load case of the IEC 61400-1. From the calculated results most of the load components have rotor revolution frequency whereas thrust and torque of the LSS show blade passage frequency. It turns out that the EWM wind condition involves the maximum ultimate loads at both hub and LSS of the horizontal axis wind turbine.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.297-300
• /
• 2006

Recently the wind farm is constructed all over the world according to the lack of the resources. The spacing between front and rear wind turbines to construct the wind farm. The wake of front wind turbine has a bad effect on the performance of the rear wind turbine. A basic CFD study on the wake effect of HAWT for construction of wind farm was done by the FLUENT. This study shows the wake of front wind turbine and the results of this study will be used to calculate the spacing between front and rear wind turbines

• 신재생에너지
• /
• 제1권4호
• /
• pp.38-42
• /
• 2005

The optimum design and the performance analysis software called POSEIDON for the HAWT [Horizontal Axis Wind Turbine] was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The lift and the drag coefficient of S-809 airfoil were predicted via X-FOIL and also the post stall characteristics of S-809 were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the wind tunnel test results, performed by Sommers in Delft university of technology. The rated power of the testing rotor is 20kW[FIL-20] at design conditions. The experimental aerodynamic parameters and the X-FOIL data were used for the power prediction of the FIL-20 respectively. The comparison results shows good agreement in power prediction.

• 신재생에너지
• /
• 제4권3호
• /
• pp.36-44
• /
• 2008

This paper discusses about the mathematical modelling of a new conceptual shape of horizontal axis wind turbine. The geometrical characteristic of wind turbine is studied for the variation of azimuthal angles and elevation angles. The projecting trajectories of Cuban-8 blade due to rotation are analyzed on the each plane in the Cartesian coordinate system. Trajectories show several interesting graphical patterns since the geometrical shape is complicated with the rotational motion of two twisted circumferential blades with elevation angles.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.886-895
• /
• 2009

The purpose of this work is to compare and analyze computed results with experimental data of NREL (National Renewable Energy Laboratory) Phase VI for the whole operating conditions of various wind speeds using $\kappa-\omega$ turbulence model provided in the commercial code, FLUENT. Performance results such as power coefficient, shaft torque, pressure coefficient show a good agreement with experimental data. But, root bending moment is over-predicted than the experimentally measured value by about 30% for the whole operating conditions because of indefinite measurement reference. Nevertheless, these results qualitatively show a good tendency in the aspect of aerodynamic performance. As wind speed increases, streamlines on the surface of blade show more and more complex pattern.

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.891-898
• /
• 2007

피치 제어형 수평축 풍력터빈에 대한 공력최적 설계 형상과 피치 변화에 따른 공력 성능 특성을 수치적으로 계산하였다. 수치적 방법은 날개 요소이론을 적용하였으며, Prandtl의 팁 손실 효과, 에어포일의 분포 효과, 후류의 회전 효과 등을 고려하였다. 블레이드 설계에는 총 6개의 서로 다른 에어포일을 사용하였으며, 구조적 강성을 갖기 위해서 허브 측에는 최대 40% 두께비의 에어포일을 분포시켰다. 최적 설계에서 얻어진 비선형 코드 길이는 제작성과 무게 등을 고려하여 선형화 시켰고, 선형화에 따른 공력성능 변화는 무시할만하다는 결과를 얻어내었다. 피치각 변화에 따른 동력성능, 추력성능, 토크 성능 곡선을 비교한 결과 $3^{\circ}$의 피치각 변화에도 민감한 공력 값의 변동이 생김을 알 수 있었고, 정밀한 피치 제어를 위한 각도 제어는 증분이 $3^{\circ}$보다 작은 값으로 피치 제어 알고리즘과 피치 구동 장치가 필요함을 알 수 있었다. 또한 최대 토크는 설계속도비보다 작은 속도비에서 발생되는 결과를 보여주었다.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.134-141
• /
• 2002

본 연구에서 곡선 와동 요소와 CVC (Constant Vorticity Contour) 후류 모델이 수평축 풍력 터빈의 공력 성능 및 소음을 예측하기 위해 사용되었다. 또한 2차 회귀에 근거하여 회전수의 예측을 하였다. 광대역 소음을 예측은 경험식에 근거한 방법을 사용하였다. 직선 와동요소 대신에 BCVE (Basic Curved Vortex Element)와 SIVE(Self Induction Vortex Element)를 사용하는 곡선 와동 요소를 사용하였으며 CVC 후류 모델에서 와동의 강도는 블레이드의 스팬방향 및 와동을 따라서 일정하다고 가정하였다. 이렇게 만들어진 자유 후류는 와동 격자를 대치한다. 본 방법은 여타의 방법에 비해 휠씬 적은 계산 시간을 요구하며 후류의 정확한 구조를 모사할 수 있었다. 검증을 위해서는 김준모의 실험과 Zond사의 Z-40FS의 모델을 성능 예측 결과와 WTS-4와 USWP를 소음 예측 결과와 비교하였다. 계산 결과는 실제의 실험치와 잘 일치하는 것으로 나타났다.